Diomedes Tatoy

DIOMEDES P.TATOY

Poblacion, Sogod Ccbu

+639184676242

Objective: A result oriented individual with over 23 years Hands on Experience in the field of Mechanical as well as Senior Mechanical Technician in Oil and Gas field for both On shore and Off shore. Responsible for repairing, Trouble Shooting, Preventive, Predictive and Corrective Mechanical Maintenance activities of Rotating and Static Equipment’s.

PERSONAL INFORMATION:

BIRTHDATE: October 16, 1960
AGE: 57 Years old
CIVIL STATUS: Married
PASSPORT NUMBER: P1729870A
PASSPORT VALIDITY: 23 January 2022

SUMMARY OF WORK EXPERIENCE:

TOTAL YEARS OF EXPERIENCE: 23 Years
TOTAL YEARS OF OIL AND GAS: 8 Years
TOTAL YEARS OF MIDDLE EAST/OVERSEAS EXPERIENCE: 9 Years

TOTAL YEARS OF COMMISSIONING/START UP WITH INSTALLATION: 2 Years
TOTAL YEARS OF FIELD MAINTENANCE EXPERIENCE (preventive and corrective): 6 Years
TOTAL YEARS OF SHUTDOWN EXPERIENCE: 3 Years

DETAILED WORK EXPERIENCE:

TERM OF SERVICE: FEBRUARY 08, 2015 – MARCH 30, 2017
COMPANY 1: ARABIAN DRILLING
PROJECT: ARAMCO SCHLUMBER PROJECT
ADDRESS: DHARAN SAUDI ARABIA
PROJECT NATURE: ONSHORE GAS DRILLING RIG
POSITION: SENIOR RIG MECHANIC

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Arabian Drilling Company provides on shore and off shore drilling services to extract oil and gas. It offers well intervention, well testing, procurement management, inventory management, and logistics management services. Arabian Drilling Company operates as a subsidiary of the industrialization and Energy Services Company.

JOB DUTIES and RESPONSIBILITIES:

Responsible to the daily job safety in accordance with the company and Aramco policy.
To maintain all equipment’s inside the rig premises and a schedule of proper mechanical maintenance.
Adhere to all safety rules and regulations in carry out work including the detail job procedures indicated in work permits.
Maintain good housekeeping at work site.
Responsible in Rig Down and Rig Up in Rig Move activities.
Report any abnormalities on hazards in the Rig facilities.
Check equipment and operating system wherever necessary.
Ensure mechanical operations standards and controls are maintained at high quality.
Resolve motor, pumps, conveyor and hydraulic problem.
Repair and performed preventive maintenance as per established standards.
Use hand tools and rigging equipment daily.
Handle simple and complex heavy industrial equipment like forklifts, scissor lifts, basket trucks and bob cats.
Handle personal tools for job including up to date documented personal tools list.

ROTATING EQUIPMENTS: Generators, Compressors, Pumps, Engines
STATIC EQUIPMENT: Pumps, Compressors, Gear Boxes and Couplings.

REASON FOR LEAVING: Finished Contract

Employment Gap: Vacation /Standby

TERM OF SERVICE: OCTOBER 21, 2012 – MARCH 16, 2013
COMPANY 2: C.B.I CLOUGH J.V
PROJECT: EXXON MOBIL P.N.G-L.N.G. EPC4 PROJECT
ADDRESS: TARI, PAPUA NEW GUINEA
PROJECT NATURE: PNG LNG GAS CONSTRUCTION FACILITIES
POSITION: MECHANICAL MILLWRIGHT TECHNICIAN

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

The PNG LNG Project is an integrated development that includes gas production and processing facilities, onshore and offshore pipelines and liquefaction facilities. The contract scope includes the EPC work for the gas conditioning plant, nearby wellheads and associated piping and infrastructure, to be located in the Southern Highlands of Papua New Guinea.

JOB DUTIES and RESPONSIBILITIES:

Attended tool box and safety meeting daily before the work started.
Prepare the tools and equipment’s to be used in installation of gas turbine, pumps and air compressors with the vendors.
Maintain always a good housekeeping at worksite and ensure the tools and equipment’s are kept in working order.

ROTATING EQUIPMENTS: Installation of power supply generator (GE Gas Turbine)
STATIC EQUIPMENT Installation of power supply generator

REASON FOR LEAVING: Project Demobilization

Employment Gap: On Call Duties

TERM OF SERVICE: JUNE 18, 2011 – NOVEMBER 09, 2011
COMPANY 3: TRANSOCEAN COMPANY
PROJECT: JACK BATES (SEMI-SUBMERSIBLE DRILLING RIG UPGRADE PROJECT)
ADDRESS: KEPPEL FELS MARINE FACILITIES SINGAPORE
PROJECT NATURE: RIG COMMISSIONING PROJECT AND REPAIR
POSITION: SENIOR RIG MECHANIC

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Transocean Ltd. Engages in the provision of offshore contract drilling services for oil and gas wells. It also owns and operates offshore drilling fleet such as ultra-deep water, harsh-environment, deep water, and mid water rigs.

JOB DUTIES and RESPONSIBILITIES:

Carries out a variety of mechanical repair such as static, rotating equipment’s centrifugal pumps, compressors, heat exchangers, valves, piping systems, winch and agitators
Do commissioning and start-ups activities.
Daily receiving instructions from permit to work office to obtain the required materials and equipment’s and execute work accordingly.

ROTATING EQUIPMENTS: Pumps, Motor, Generators, and Compressors.
STATIC EQUIPMENT: Gear boxes, compressors and pumps.

REASON FOR LEAVING: Finished Project

Employment Gap: Project Duties (On Call)

TERM OF SERVICE: MARCH 09, 2010 – MAY 17, 2011
COMPANY 4: G.E GLOBAL ENERGY (GRANITE INTERNATIONAL)
PROJECT: QATAR ALUMINUM (QATALUM)
QATAR ELECTRICITY AND WATER COMPANY
MESSAEID ELECTRIC POWER PLANT
ADDRESS: DOHA STATE OF QATAR
PROJECT NATURE: OIL AND GAS POWER GENERATION (SHUTDOWN MAINTENANCE)
POSITION: MECHANICAL TECHNICIAN (SHUTDOWN)

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

G.E Oil and Gas Inc. is an oil and gas extraction company. The company provides oil and gas exploration and production services. G.E Oil and Gas offers its products services around the world.

JOB DUTIES and RESPONSIBILITIES:

Shutdown activities of power supply G.E gas turbine.
Attended meeting before started the daily activities in shutdown.
Follow always the safety guidelines and procedures.
Discuss with the supervisor regarding the tools needed in the daily activities,
Always follow the supervisor to execute every job.
Remove the upper casing of the turbine and disconnect the coupling and remove the pig tails
Remove the auxiliary oil pumps and hydraulic systems.
Disconnect all the piping’s and change gaskets.

ROTATING EQUIPMENTS: Pumps, Generators, Compressors, Blowers and Motors.
STATIC EQUIPMENT: Coupling and Gear Boxes,High torque,River Hawk

REASON FOR LEAVING: Project Duties (On Call)

Employment Gap: Project Duties (On Call)

TERM OF SERVICE: DECEMBER 29, 2010 – FEBRUARY 04, 2011
COMPANY 5: G.E. GLOBAL ENERGY (GRANITE INTERNATIONAL)
PROJECT: MEKONG ENERGY
ADDRESS: PHU MY 2.2 VIETNAM
PROJECT NATURE: OIL AND GAS POWER GENERATION (SHUTDOWN MAINTENANCE)
POSITION: MECHANICAL TECHNICIAN (SHUTDOWN)

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

G.E Oil and Gas Inc. is an oil and gas extraction company. The company provides oil and gas exploration and production services. G.E Oil and Gas offers its products services around the world.

JOB DUTIES and RESPONSIBILITIES:

ROTATING EQUIPMENTS: Gas turbine, compressors and generators
STATIC EQUIPMENT: Pumps, coupling and gear boxes,high torque,river hawk

REASON FOR LEAVING: Project Duties (On Call)

Employment Gap: Project Duties (On Call)

TERM OF SERVICE: OCTOBER 02, 2010 – OCTOBER 22, 2010
COMPANY 6: G, E GLOBAL ENERGY (GRANITE INTERNATIONAL)
PROJECT: OMIFCO (OMAN INDIA FERTILIZER COMPANY)
ADDRESS: SUR CITY OMAN
PROJECT NATURE: OIL AND GAS POWER GENERATION (SHUTDOWN MAINTENANCE)
POSITION: MECHANICAL TECHNICIAN SHUTDOWN

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

G.E Oil and Gas Inc. is an oil and gas extraction company. The company provides oil and gas exploration and production services. G.E Oil and Gas offers its products services around the world.

JOB DUTIES and RESPONSIBILITIES:

ROTATING EQUIPMENTS: Gas turbine, compressors and generators
STATIC EQUIPMENT: Pumps, coupling and gear boxes,high torque,river hawk

REASON FOR LEAVING: Project Duties (On Call)

Employment Gap: Project Duties (On Cal)

TERM OF SERVICE: MARCH 04, 2010 – APRIL 02, 2010
COMPANY 7: G.E GLOBAL ENERGY (GRANITE INTERNATIONAL)
PROJECT: GASCO OIL AND GAS PRODUCTION FACILITIES
ADDRESS: ASAB 1 OIL AND GAS PROCESSING, ABU DHABI
PROJECT NATURE: OIL AND GAS POWER GENERATION (SHUTDOWN MAINTENANCE)
POSITION: MECHANICAL TECHNICIAN SHUTDOWN

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

G.E Oil and Gas Inc. is an oil and gas extraction company. The company provides oil and gas exploration and production services. G.E Oil and Gas offers its products services around the world.

JOB DUTIES and RESPONSIBILITIES:

ROTATING EQUIPMENTS: Gas turbine, compressors and generators
STATIC EQUIPMENT: Pumps, coupling and gear boxes,high torque,river hawk

REASON FOR LEAVING: Project Duties (On Call)

Employment Gap: Project Duties (On Call)

TERM OF SERVICE: MARCH 11, 2008 – JUNE 29, 2009
COMPANY 8: TRANSOCEAN LEGEND (SEMI SUBMERSIBLE RIG)
PROJECT: DEVON OIL CHINA
TAP OIL PHILIPPINES
DAEWOO MYANMAR
ADDRESS: ASIA PACIFIC
PROJECT NATURE: OIL DRILLING
POSITION: SENIOR RIG MECHANIC

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

JOB DUTIES and RESPONSIBILITIES:

Carries out the preventive predicted routine and shutdown maintenance of all equipment’s inside the rig.
Adhere to safety rules and regulations in carry out works include the detailed procedures indicated in work permits.
Performs other related duties such as participating in safety drill or fire fighting.

ROTATING EQUIPMENTS: Pump motors, Blowers, Generators, Engine, Compressors
STATIC EQUIPMENT: Pumps, Gear Box, Couplings

REASON FOR LEAVING: Finished Contract

Employment Gap: Project Duties (On Call)

TERM OF SERVICE: AUGUST 01, 2007 – SEPTEMBER 29, 2007
COMPANY 9: TRANSOCEAN INC. (SEMI SUBMERSIBLE RIG)
PROJECT: SEDCO 702 RIG UPDATE PROJEC
ADDRESS: KEPPEL FELS MARINE FACILITIES SINGAPORE
PROJECT NATURE: OIL AND GAS DRILLING
POSITION: RIG MECHANIC/COMMISSIONING TECHNICIAN

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

JOB DUTIES and RESPONSIBILITIES:

Checking always the Lube Oil System, Cooling System, Inlet and Outlet Valves if it is open when engines are running.
Start up the Rig Compressors and to clean the suction water strainers in compressor cooling system.
Check the manual valves and pneumatic valves to secure if it is open in position during operation
Performed overhauling changed defective O-rings and gaskets and oil high pressure manifolds.
Repaired the hydraulic control panel and changed worn out.
Performed and maintained the cleanliness in working areas.

ROTATING EQUIPMENTS: Pump motors, Blowers, Generators, Engine, Compressors
STATIC EQUIPMENT: Pumps, Gear Box, Couplings, Boilers, Heat Exchanger

REASON FOR LEAVING: Rig Demobilization

Employment Gap: Project Duties (On Call)

TERM OF SERVICE: MARCH 21, 2005 – APRIL 10, 2007
COMPANY 10: B.P. BRITISH PETROLEUM
PROJECT: C.A-CWP GAS COMPRESSION PLATFORM (PRODUCTION PLATFORM)
SHAH DINIZ PLATFORM (JACK UP RIG)
SANGGACHAL OIL TERMINAL (OIL PROCESSING)
EXXON MOBIL OPF, EPC-1 (GAS PROCESSING)
PCWU (JACK UP RIG)
ADDRESS: 3rd FLOOR KHAGANI TRADE CENTER,
KHAGANI ST. BAKU CITY AZERBAIJAN
PROJECT NATURE: OIL AND GAS PROCESSING PLANT AND JACK UP RIG COMMISSIONING
POSITION: MECHANICAL COMMISISIONING TECHNICIAN

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

It is a vertically integrated company operating in all areas of the oil and gas industry, including exploration and production, refining, distribution and marketing, petrochemicals, power generation and trading.

JOB DUTIES and RESPONSIBILITIES:

Performed preliminary commission of mechanical system in construction site (onshore) and the final in offshore.
Responsible in final hydro testing of cooling pipe system, and reading of required temperature and pressure, vibration.
Responsible of safety permits in every job performed.
Follow always to vendor and rig supervisor in performing the jobs.

ROTATING EQUIPMENTS: Compressors, Pumps, Blowers, Turbo Charger
STATIC EQUIPMENT: Pumps, Compressors, Coupling, Gear Box, Valves, Boilers, Furnaces,
Heat Exchanger, Turbine.

REASON FOR LEAVING: Finished Contract
Employment Gap: Employment Demobilization

TERM OF SERVICE: DECEMBER 27, 2002 – SEPTEMBER 23, 2004
COMPANY 11: SIRTE OIL COMPANY AND PETRO CHEMICAL
PROJECT: SHUTDOWN MAINTENANCE
ADDRESS: P.O BOX 385 MARZA EL BREGA TRIPOLI LIBYA
PROJECT NATURE: OIL AND GAS, PETRO CHEMICAL
POSITION: MECHANICAL MAINTENANCE TECHNICIAN

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Sirte Oil Company for production, manufacturing of oil and gas is one of the Libyan national companies operating under the national oil corporation of Libya. The company is located in Marsa El Brega which is 800 km east of Tripoli Sirte Oil Company diverse operations include the exploration for, production, manufacturing of oil and gas.

JOB DUTIES and RESPONSIBILITIES:

Report directly to maintenance supervisor regarding the daily maintenance activities.
Perform equipment’s check-up and spare parts availability in preparation of the shutdown activities.
Secure always the highest standard of safety and follow always the procedure and safety code
Responsible in repair/overhauling of centrifugal pumps and all rotating equipment’s.

ROTATING EQUIPMENTS: Compressors, Gas Turbines, Pumps, Blowers
STATIC EQUIPMENT: Pumps, Compressors, Coupling, Gear Box, Valves, Boilers, Furnaces,
Heat Exchanger, Turbine.

REASON FOR LEAVING: Finished Contract

Employment Gap: Demobilization

TERM OF SERVICE: NOVEMBER 15, 2000 – DECEMBER 15, 2002
COMPANY 12: RIYADH CABLE CO.
PROJECT: MECHANICAL MAINTENANCE
ADDRESS: P.O. BOX 42540 RIYADH 11551 K.S.A.
PROJECT NATURE: ELECTRICAL WIRE AND CABLE INDUSTRY
POSITION: MECHANICAL MAINTENANCE TECHNICIAN

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Riyadh Cables Group of Companies manufactures and exports power and telecommunication cables. Their products include energy wires, cables, and cords, copper rods and PVC granules, telephone cables and optical fibre cables.

JOB DUTIES and RESPONSIBILITIES:

Directly reporting to maintenance manager.
Supervise and give instructions to all mechanical personnel.
Responsible to plan the preventive schedule.
Plans and designs mechanical system and components including modification and fabrications.
Prepares mechanical engineering plans, specifications and cost estimates.
Prepare man hour utilization report

ROTATING EQUIPMENTS: Compressors, Pumps, Motors, Rigid Machine
STATIC EQUIPMENT: Gear Boxes, Pumps, Valves, Welding Machine, Couplings, Blower,
Heat Exchangers

REASON FOR LEAVING: Resigned

Employment Gap: Vacation

TERM OF SERVICE: AUGUST 27, 1998 – AUGUST 30, 1999
COMPANY 13: JEDDAH CABLE CO.
PROJECT: MECHANICAL MAINTENANCE
ADDRESS: P.O. BOX 31248 JEDDAH 21497 K.S.A.
PROJECT NATURE: ELECTRICAL WIRE AND CABLE INDUSTRY
POSITION: PRODUCTION/MECHANICAL MAINTENANCE SUPERVISOR

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Jeddah Cable Company Ltd. Engages in engineering, manufacturing and selling electrical wires and cables in the Kingdom of Saudi Arabia and internationally. The company’s product include medium voltage cables, low voltage cables, overhead lines, indoor wires, and copper rods; PVC compounds for electrical cables, mater batches, soft and rigid profiles, pipes, fittings, bottles, shoes, and hoses and steel drums.

JOB DUTIES and RESPONSIBILITIES:

Directly reporting to the Plant Manager.
Supervise and give instructions to all mechanical maintenance personnel and to all production operators in low voltage area.
Performed daily routine check-up of all machineries to ensure the performance.
Maintain records of all maintenance work order issued to assess the cost of repair on monthly basis.
Plans and design mechanical system and report to manager for approvals.
Prepare work order authority.

ROTATING EQUIPMENTS: Compressors, Pumps, Motors, Rigid Machine
STATIC EQUIPMENT: Gear Boxes, Pumps, Valves, Welding Machine, Couplings, Blower,
Heat Exchangers

REASON FOR LEAVING: Resigned

Employment Gap: Vacation

TERM OF SERVICE: JANUARY 31, 1997 – JANUARY 27, 1998
COMPANY 14: HOBAS EMIRATES CO.
PROJECT: PRODUCTION MACHINE OPERATOR
ADDRESS: P.O. BOX 46231 ABU DHABI U.A.E
PROJECT NATURE: UNDERGROUND FIBER PIPE MANUFACTURING
POSITION: MACHINE OPERATOR

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Pipe Systems with the state of the art production technologies and market them for these application fields. With the services and support we offer frim dimensioning and routing pipelines through calculations to consultancy on site.

JOB DUTIES and RESPONSIBILITIES:

Report directly to production supervisor regarding production activities.
Submit daily production output report.
Prepares work orders on machine troubles.

ROTATING EQUIPMENTS: Pumps, Compressors
STATIC EQUIPMENT: Gear Boxes, Coupling and Heat Exchangers

REASON FOR LEAVING: Resigned

Employment Gap: Vacation

TERM OF SERVICE: MAY 15, 1996 – JANUARY 27, 1997
COMPANY 15: LEADER – REYPHIL CABLE CORPORATION
PROJECT: MECHANICAL MAINTENANCE AND MACHINE INSTALLATION
ADDRESS: BARRIO SAN AGUSTIN, DASMARINAS CAVITE
PROJECT NATURE: ELECTRICAL WIRE AND CABLE MANUFACTURING
POSITION: MECHANICAL MAINTENANCE ENGINEER

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Manufacturer and distributor of world class aluminium rods, power cable, building wires and telecommunication cables in the Philippines.

JOB DUTIES and RESPONSIBILITIES:

Develop methods and operation in maintenance in relation with planning.
Prepares close job authority and man-hour analysis per job.
Responsible in conducting seminars and basic training in relation to preventive work.

ROTATING EQUIPMENTS: Motors, Pumps, Blowers, Compressors
STATIC EQUIPMENT: Rigid Machine, Pumps, Coupling, Extruders

REASON FOR LEAVING: Resigned

Employment Gap: Vacation

TERM OF SERVICE: FEBRUARY 04, 1995 – DECEMBER 02, 1995
COMPANY 16: MITSUKAWA ELECTRIC INDUSTRIES INC.
PROJECT: MECHANICAL MAINTENANCE AND MACHINE INSTALLATION
ADDRESS: ORTIGAS AVE. EXT. CAINTA, RIZAL
PROJECT NATURE: ELECTRICAL WIRE AND CABLE MANUFACTURING
POSITION: SUPERVISOR – MAINTENANCE SECTION

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Manufacture of insulated wire and cables.

JOB DUTIES and RESPONSIBILITIES:

To manage the section according to management policies and objectives.
Prepares preventive maintenance program to ensure that the machine and equipment are in good working conditions to meet productivity output.
Keep the record of all mechanical troubles and prepares the spare parts.

ROTATING EQUIPMENTS: Motors, Pumps, Blowers, Compressors
STATIC EQUIPMENT: Rigid Machine, Pumps, Coupling, Extruders

REASON FOR LEAVING: Resigned

Employment Gap: Vacation

TERM OF SERVICE: JANUARY 31, 1994 – JANUARY 27, 1995
COMPANY 17: KING ABDUL AZIZ CITY FOR SCIENCE AND TECHNOLOGY
PROJECT: MAINTENANCE PROJECT
ADDRESS: P.O. BOX 6086 RIYADH 11 42 K.S.A
PROJECT NATURE: SCIENCE AND TECHNOLOGY SCHOOL
POSITION: OPERATION MAINTENANCE FOREMAN

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

King Abdul Aziz City for Science and Technology is a scientific government institution that supports and enhances scientific applied research. It coordinates the activities of government institutions and scientific research centres in accordance with the requirements of the development

JOB DUTIES and RESPONSIBILITIES:

Conduct and implement the preventive maintenance of all service vehicle owned by the company.
Prepare spare parts in heavy and minor repairs and coordinate always to purchasers for spare parts requests,

ROTATING EQUIPMENTS: Motors, Compressors, Blowers, Pumps
STATIC EQUIPMENT: Pumps, Compressors, Gear Boxes

REASON FOR LEAVING: Resigned

Employment Gap: Vacation

TERM OF SERVICE: OCTOBER 13, 1989 – OCTOBER 14, 1993
COMPANY 18: SAUDI CABLE COMPANY
PROJECT: PRODUCTION OPERATOR
ADDRESS: P.O.BOX 4403 JEDDAH 21491 K.S.A.
PROJECT NATURE: ELECTRICAL WIRE AND CABLE INDUSTRY
POSITION: MACHINE OPERATOR

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Saudi Cable Company is involved in the manufacture and marketing of rails, electric cables and wires.
It produces energy cables, switch gears, insulator, overhead lines, conductor’s towers, cable materials transformers and optical ground wire

JOB DUTIES and RESPONSIBILITIES:

Report directly to production supervisor regarding production activities and materials to availability.
Perform work order report on machine abnormalities.

ROTATING EQUIPMENTS: Motors, Pumps, Blowers, Compressors
STATIC EQUIPMENT: Rigid Machine, Pumps, Coupling, Extruders

REASON FOR LEAVING: Resigned

Employment Gap: Vacation

TERM OF SERVICE: JULY 15, 1984 – OCTOBER 10, 1989
COMPANY 19: AMERICAN WIRE AND CABLE INC.
PROJECT: MECHANICAL MAINTENANCE
ADDRESS: K.M 16 SOUTH SUPER HIGHWAY, PARANAQUE
METRO MANILA PHILIPPINES
PROJECT NATURE: ELECTRICAL WIRE AND CABLE INDUSTRY
POSITION: MECHANICAL MAINTENANCE SUPERVISOR

BRIEF COMPANY PROFILE and DESCRIPTION OF WORK NATURE:

Its products from construction, telecommunications, electric power and other industries. The company is revitalizing and pursuing vigorously its efforts on securing superior raw materials, installing modern and state-of-the art machines and testing equipment.

JOB DUTIES and RESPONSIBILITIES:

Supervise and give instruction to all mechanical personnel regarding the daily activities.
Conduct a weekly meeting to discuss maintenance program objectives.
Maintain high standards of housekeeping within the area of responsibilities.
Prepare and submit a daily report regarding the accomplishment of mechanical section.
Perform supervisory and management responsibilities over all personnel of central maintenance department
Report directly to department head regarding the machine abnormalities.
Prepares and design and fabrication of accessories for production or wire and cable if necessary by approval of the managers upon discussing it in the weekly meeting.

ROTATING EQUIPMENTS: Motors, Pumps, Blowers, Compressors
STATIC EQUIPMENT: Rigid Machine, Pumps, Coupling, Extruders

REASON FOR LEAVING: Rank and File Employee Strike

Employment Gap: AWOL

PLANT EQUIPMENT/TOOLS/INSTRUMENTS:

A. Mechanical Measuring Tools

BRAND MODEL TYPE

MITUTOYO 3D VERNIER CALIPERS
ASHCROFT LEKO-ONA PNEUMATIC GAUGES
QT 425 EN 837 HYDRAULIC GAUGES
MITUTOYO 293- 340-30 IP MICRO METER
MITUTOYO VERNIER DEPTH GAUGE
MITUTOYO BEVEL GAUGE

B. Hydraulic Tools

BRAND MODEL TYPE

INERPACK BT/32 W HYDRAULIC JACK
INERPACK ALIBABA PORTABLE GRINDER
INERPACK 3D CAD PORTABLE DRILL

PLANT MAINTENANCE or OTHER RELATED SYSTEMS:

A. Computerized Maintenance Management System

a. CMMS – Software package to maintain computer data base of information about an organization of maintenance operation.

b. CMMS – computerized software that helps maintenance term keep a record of all assets. They are responsible for schedule and track maintenance tasks. Keep a historical record of work they performed.

B. Permit to Work

a. Safety permit to work – Essay to use permit management tool effective work permit to
work management.

b. Minimize Human Error – Lock out Tag out (job safety analysis)

c. A permit to work system is to control a certain types of work that are potentially
hazardous. It is documented which specifies the work to be done and precaution to be
taken essential part of safe system of work for many maintenance activities.

C. Microsoft Office Program

a. Microsoft Office Word

b. Microsoft Power Point Presentation

DRAWING, DIAGRAMS, and PLANS:

a. P and IDs – the piping and instrumentation diagram.

b. PFD – process flow diagram. The general flow of process and equipment.

c. Mechanical Seal – dual seals and single seals.
Single seals plans – 01,02,11,13,14,21,23,31,32,41
Dual seals plan – 52, 53A, 53B, 53C, 54

ACHIEVEMENT/ AWARDS

NAME OF AWARD MONTH YEAR

Safety Commendation Award 25 September 2006
(Exxon Nefte Gas)

Safety Awareness Award 26 January 2011

TRAININGS/SEMINAR:

TRAININGS/SEMINAR ATTENDED MONTH YEAR

Hydrogen Sulfied Level 2 16 February 2015
Aerial Work Platform 24 March 2014
Sea farers Certificate w/ Seaman’s Book. 28 August 2014
Anti-Piracy Awareness Training 17 June 2011
Advance Fire Fighting 19 April 2008
Next Steps Seminar 30 July 2008
Risk Assessment Seminar 24 March 2007
OPITO BOSIET Training 15 June 2005
HUET OFFSHORE Training 17 June 2005
Work at Height Seminar 28 March 2007
Task Specific Assessment 27 March 2007
Manual Handling Training 03 March 2007
S.K.F Bearing Seminar 07 November 1998
Walk your Talk Seminar 29 September 1996
Basic Safety Training 17 October 2007
Basic Supervisory Training 22 July 1988
Electro Pneumatic Seminar 24 April 1987

EDUCATIONAL QUALIFICATION

VOCATIONAL COURSE:

Automotive Mechanic
1977 – 1978
Cebu Technical School
Cebu City

COLLEGE DEGREE

B,S Mechanical Engineering
1979 – 1984
Cebu Central College
Cebu City

SECONDARY: High School Diploma

1973 – 1977
Juan Dosado Memorial School
Sogod Cebu

PRIMARY: Elementary Diploma

1967 – 1973
Catmon Central Elementary School
Catmon Cebu

All above information are true and was formatted to suit the requirement of our prospective employer.

Diomedes P. Tatoy
APPLICANT

Diomedes Tatoy Mechanical