RESUME

BABELO L. TRINIDAD
Address (Philippines): Block 16 Lot 14 Cerritos East Subdivision
San Miguel, Pasig City
(Singapore): 168 Lentor Loop, Bullion Park, Tower 2
Unit No. 05-03, Singapore, S789098
Contact No.: Mobile – (+65)81897347
: Home – (+65)6687 5173
E-mail: [email protected]

WORK EXPERIENCES:

March 2011
to
present SKF Asia Pacific Pte, Ltd., Product Development Engineer, Singapore. Attend global technical support and inquiry on power transmission products such as couplings, chains, sprockets, belts, pulleys, bushings and new products. Prepare technical design in 2D and 3D drawing as requested by sales unit, customer or factory. Check and ensure quoted power transmission products conforms to customer requirements and specifications and complied with ANSI, DIN, BS, ISO, AGMA, MPTA and other related international standards. Prepare product technical data and provide/calculate packaging details as required by sales and shipping department. Provide product drawings and documentation for project proposals, catalogue, brochure, conference and other promotional and advertising purposes.
Reason for Leaving: Engage into a more challenging job where can I achieved a great accomplishment and can fully utilizes my skills and knowledge. As much as possible a job where I can be with my family.

October 2009
to
January 2011 Abdul Rahman Al-rabiah and Partners Co., Mechanical Engineer / Safety Officer /
Project Manager, Dammam KSA. Conduct site visit and prepare scope of work prior to submission of bid proposals for the assigned projects. Mechanical design, calculation and analysis on the assigned projects such as HVAC, plumbing, process equipment and piping. Checked all designs, drawings and submittals to ensure compliance with local standards such as Saudi Aramco standards (such as SAES, SAMMS, PIP, SAEP, etc.), Royal Commission Engineering Standards and all related international standards such as ASME, API, ASTM, ANSI, UL, NFPA, etc. Prepare project submittals reports, documents and drawings as per scope of work. Prepare project plans and monitoring to ensure on time completion of all submittals. As a document engineer, prepare weekly timesheet for client approval on all on-going projects. Update and submit weekly expended man-hour to ensure man-hours utilized is within allocated budget per service order. Prepare pre-approval form (PAF) for technical assistance, scoping, transportation, reproduction and other services render as per project design request or approved work releases. Prepare transmittal and keep records for all documents and drawings submittals. Keep all weekly timesheets and pre-approval forms for invoicing and prepare necessary documents required for invoicing to be forwarded to accounting for monthly billing/invoicing. As a Safety Officer, prepare annual HSE plans and programs and monitor and updates all HSE activities. Conduct inspections such as buildings and facilities, fire extinguisher, smoke detector, fire alarm and emergency light. As per request, conduct site inspection, risk assessment, hazard identification and HAZOP study. Report and recommends corrective action for non-compliance on site construction safety such as scaffolding, excavation, working at heights and rigging. As a Project Manager, ensure project plans and executions are effectively implemented and in accordance with the contract documents. Ensure all submittals such as drawings, material qualifications/approvals, site inspections, testing requirements, quality and safety plans and method statements are in compliance with project contracts and specifications. Ensure all phases and aspects of the project are properly documented.
Reason for Leaving: To see and be with my family often and able to enhance my knowledge in mechanical power transmission engineering and application.

December 1993 to
October 2009 Metals Industry Research and Development Center, Senior Science Research Specialist, Bicutan, Taguig City, M. Manila, Philippines. A project leader responsible for all phase of project from planning and scheduling, design, fabrication, testing and commissioning. Mechanical design/drafting such as products, tools, die and fixtures, process and equipment (electro-mechanical, hydraulic, pneumatic, piping etc.) for the assigned projects using AutoCAD 2000, 2002 and Solidedge Version 20. Prepare bill of materials and requisition of materials needed for the projects or designs. Supervise/Coordinate machining, casting, welding and fabrication of parts for the prototyping and developing of equipment, machinery and processes for metals and allied industry. Conduct debugging/ commissioning, test run and evaluation on new develop product, processes and equipment or machinery. Ensure on time delivery of materials and resources in the implementation of the project to meet the project schedules. Prepare monthly and weekly project status report.
Reason for Leaving: Avail early retirement and consider an overseas opportunity for a much greener pasture

Sept 1991 to
July 1993 Rohm Electronics, Philippines, Inc., Process Engineer, Trained on Japanese Manufacturing Practice specifically on Micro-Chip Resistor. Prepare/Updates operation, quality, and technical standards on laser trimming process of micro-chip resistor to assured high quality products are being produce and to maximize production output. Evaluates and qualifies machines prior to actual production. Improves production yield through process improvements and by upgrading manpower skills. Implement Total Quality Control Program (TQC/TQM) in CTL process to monitor and control abnormal quality and defective products by implementing control charts. Implement Total Productive Maintenance Program (TPM) in CTL process to optimize and improve equipment utilization and performance. Analyzes the CTL process capability and condition and ensure that quality, cost and schedule are met. Verification/Evaluation of abnormal lots that are out of the specification and take action to correct.
Reason for Leaving: Take over my family farm and retail business

August 1990
to
August 1991 Allegro Microsystem Philippines, Inc., Production Support and Maintenance Marimar Village, Parañaque M.M.. Supervision of maintenance and repair of automated test equipment (ATE), ATM lead former/scanner/straightener, Markem Brander and heat sink Stamping machines, Hepco lead former and trimmer, Ismeca & Sillner laser marking (CO2 Gas Laser) taping machine, Tesec and MCT handlers, Introduced, set-up and qualify newly arrived equipment in the facility. Provide technical training to production, study machine failures (as per component or sub-assembly), Design/Fabrication of assigned electronic/mechanical projects to enhance job methods or equipment performance, Performed scheduled and arranged predictive maintenance component or spare rework/repair/replace level, Implement plans to optimize and improve equipment utilization and performance.
Reason for Leaving: Better opportunity and Training

July 1987 to July 1990

D&L Industries, Inc.,

Management Trainee/Process Engineer, Industria St., Libis, Bagong Bayan, Quezon City. Supervise, control and monitor and fatty-acid processes such as inter-esterification, hydrogenation, deodorization, neutralization bleaching and glycerine refining. Ensure that parameters on quality, cost and schedules are met. To troubleshoot and take action on problems experienced in production due to equipment breakdown, material shortages and quality. To ensure that assigned utility and equipment are operated at the most economical means. To assist in analyzing variances of actual vs. standard cost and initiate action to correct. To supervise production workers perform their assigned task safely and efficiently. To conduct engineering studies on assigned projects. To maintain having a safe, orderly and clean workplace and ensure compliance to GMP (good manufacturing practice).
Reason for Leaving: To engage in automation and latest technology.

SPECIAL SKILLS:

• Mechanical and Product Design and Drawing (AUTOCAD 2010, Solidworks, SolidEdge, Creo 2)
• Power Transmission Product Design and Applications
• Process and Manufacturing Engineering, TPM, TQM and JIT System
• Metalworking, Metalcasting, Welding, Fabrication and Machining Process (Conventional & CNC)
• Programmable Logic Controller: Logic Sequence, Ladder Diagram Design and Programming (Omron and Siemens Simatic S7)
• Basic Computer Control, Interfacing and Communication
• Electro-mechanical, Hydraulic and Pneumatic Control and Design
• Electrical and Electronics Repair and Trouble-shooting
• Artificial Intelligent Control: Fuzzy Logic and Neural Network
• Computer Programming Knowledge: Turbo/Borland C and C++
Programming Application Develop:
1. AutoCAD DXF File Reader
2. AutoCAD DXF File to G Code Converter
3. Motion Control System (Linear and Circular Interpolation)
4. Motion Control Graphics Simulation
5. Fuzzy Logic Control System
6. Payroll System
7. Numerical Analysis Solved Problems
8. Games of Life using Genetic Algorithm
• Lecturer and Resource Speaker:
1. Programmable Logic Control Design and Programming
2. Electro-hydraulic Design and Control
3. Electro-pneumatic Design and Control
4. Mechatronics using C/C++ Programming
5. Jewelry Design and Processing
6. CAD/CAM

EDUCATION

1996 to 2004 De La Salle University
Taft Ave., Manila
Master of Science in Manufacturing Engineering and Management
Thesis: “Personal Computer Numerically Controlled Retrofitted Gas Cutting Machine
Using Fuzzy Logic”

1980 – 1984 Mapua Institute of Technology
Intramuros, Manila
Bachelor of Science in Mechanical Engineering

1976 – 1980 Far Eastern University
Sampaloc , Manila
High School

1970 – 1976 Agdangan Elementary School
Agdangan, Quezon
Elementary

PERSONAL DATA

Age : 54
Nationality : Filipino
Civil Status : Married
Sex : Male
Height : 5’ 6” (1.68 m.)
Weight : 170 lbs ( 76 kgs.)
Place of Birth : Agdangan, Quezon
Date of Birth : 27 January 1964