Jose Vargas Reyes Telecommunication Technician
AnywhereCURRICULUM VITAE
JOSE VARGAS REYES
Blk. 9 Lot 14 Montecarlo Subdivision
Brgy. Bancal Carmona Cavite Phils.
Tel : +639211965340,
+639664631475
Please review below accomplishments, from present to Previous:
DATE: October 28, 2008 to June 12, 2018
POSITION: Telecommunication Technician/ UPS Technician/ Fire Alarm Technician/Electronic Technician/BioMed Technician
COMPANY: Naizak Global Engineering System
ADDRESS: Al-Kho bar PO Box 4 Dammam 31411 Kingdom of Saudi Arabia
JOB DESCRIPTION:
A. SHAYBAH ARAMCO-Temporary Facilities ( Project #BI-10-00167)
Date: 2011 to present
Position: UPS Technician and Telecommunication Technician
Scope of Work:
· Installation of Inside Plant (Structured cabling) Chatsworth Material.
· Installations Commscope Systimax Material Cable Pulling Cat6 UTP, Cable Termination Cat6 Patch Panel 48 Pork, Termination Cat3 Patch Panel,110 Wiring Block,MGS-400, Installation of IPTV ARANTIA, UTP Data Cabling from panel to faceplate, whole set of Disk.
· Installation of 3 and 5 KVA UPS with Battery bank, Bennin 400 Amp. 48VDC Power.
· Testing and Commissioning using fluke data analyzer.
B. SADARA PROJECT ( Jubail )
Date: Dec. 9 2012
Position: UPS Technician and Telecommunication Technician
Scope of Work:
· Installations Commscope Systimax Material Cable Pulling Cat6 UTP, Cable Termination Cat6 Patch Panel 24 Port, Cable pulling, Testing Commissioning UTP Data Cable using Fluke cable Analyzer. Installation of Coaxial cable, IPTV, data of Equipment, UPS and Battery bank, Testing and Commissioning.
C. Replacement Data Network Equipment ( RDNE ) ARAMCO PROJECT #BI-10-00074
Date: Sept 2010 to Oct 2011
Position: UPS Technician and Telecommunication Technician
Scope of Work:
· Installation Equipment Junifer Core T-1600, Core MX-960, Distribution Router MX-480, Distribution Router MX-240, EDFA, HP Procurve Switch 3500yl-24G, HP Procurve 620 RPS/EPS Module (J8696A), HP Procurve Switch 5406zl, HP Procurve Switch zlpower Supply, UPS 5KVA & 3KVA
· Installation Conduiting 2” (RSC) Rigid Still Conduit, From: Existing Panel To: New AC Panel. ¾” 1” 1 ½” (EMT) From: New AC Panel To: Equipment.
· Cable Pulling (AC) Alternating Current. Power 4mm PVC cu wire or 12 (AWG) American Wire Gauge, 10mm PVC cu wire. Termination AC Power.
· Cable Pulling DC Power and Termination to Rectifier supply (LORAIN).
· Installation of Cat-6 UTP Cable To/From Patch Panel.
D. Upstream Processional Development Center (ARAMCO PROJECT #BI-10-00430)
Date: Nov 2009 to Sept 2010
Position: Telecommunication Technician
Scope of Work:
· Installations of Inside Plant (Structured cabling) Chatsworth Material
· Installations Commscope Systimax Material Cable Pulling Cat6 UTP, Cable Termination Cat6 Patch Panel 48 Pork,
· Termination Cat3 Patch Panel 50 Pork 25 pairs, Termination 110 Wiring Block, Termination MGS-400, Testing and Commissioning UTP Data Cable using Fluke cable Analyzer.
E. (ITFC) IT Future Center (ARAMCO PROJECT) PO#4502909717
Date: Jan 2010 to April 2010
Position: Telecommunication Technician
Scope of Work:
· Installation Mechanical Ceiling Support and Wall Bracket Support 65” & 55” Plasma TV, Cable pulling Cat6 UTP, Installed fiber disk, Cable (X-Tron) Cable Pulling coaxial.
F. AL QATANY PROJECT in ARAMCO- ( Yanbu, Jeddah )
Date: 2009
Position: UPS Technician and Telecommunication Technician
Scope of Work:
· Installation and Commissioning of 3KVA UPS with Battery Bank.
· Testing and Commissioning and Parameters check up.
G. KAUST- Jeddah
Date: 2009
Position: UPS Technician and Telecommunication Technician
Scope of Work:
· Installation of UPS 3KVA, 5KVA and Battery Banks, Audio Video Visual conference.
Testing and Commissioning and Parameters check up.
H. PETRORABIGH- Jeddah
Date: 2008-2009
Position: UPS Technician and Telecommunication Technician
Scope of Work:
· Installation of 5KVA UPS and Battery Banks, Testing and Commissioning and Parameters check up.
WORK EXPERIENCED IN OTHER COMPANY
WORK EXPERIENCED :
Company : BRIGHT LAMP ESTABLISHMENT
Position : Fire Alarm System Technician
Dated : Nov. 17, 2007 to Sept. 28, 2008
Job Description :
Troubleshooting and repaired Fire alarm equipment such as; Simplex, Mavigard,
Lifeco, Ademco, and others Fire alarm panel. To maintain also CCTV with monitor. Parameters check up, testing the system and commission. To check and clean the Detectors such as Ionic, Photo, Heat, Gas and Break glass, Phonic break glass and alarm hooter. To repaired and test the unit in full functional. Troubleshoot the wiring System If there is problem encounter. Maintain the T.V. and all electronic equipment.
Company : Saudi Oger Ltd. / R.D.P.C.M./BETA
Position : Fire Alarm System Technician
Dated : July 24, 2005 to May 8, 2007
Job Description :
Troubleshooting and repaired Fire alarm equipment such as; DEF and Antares, SIMPLEX. To handle also the BMS and PLC Station with the brand of Schneider. To maintain also CCTV with a Central monitor. Parameters check up, testing the system and commission. To check and clean the Detectors such as Ionic, Photo, Heat, Gas and Break glass, Phonic break glass and alarm hooter. To repaired and test the unit in full functional. Troubleshoot the wiring System If there is problem encounter. Maintain the T.V. and all electronic equipment.
Company : MODA/RSADF Ministry of Defense and Aviation / Royal Saudi Air Defense Forces
Position : Fire Alarm System Technician
Dated : November 17, 2002 to Oct.26, 2004
Job Description :
Troubleshooting and repaired Fire alarm equipment such as; SIMPLEX, ADEMCO, FARADAY, FCI, HONEYWELL and NOTIFIER. Parameters check up, testing and commissioning the system. To check and clean the Detectors such as; Ionic, Photo, Heat and gas and manual full station. To test the unit repaired in full functional. To troubleshoot the wiring System Installing and commissioning the unit.
Company : ACE-TECH ELECTRONICS CORPORATION
Position : Technical Head
Dated : March 1998 to January 05, 2002
Job Description :
Supervising the Technicians and to assign the work, to teach them and train, how to repair the unit. Installing, commissioning, programming and repairing the small and big capacity of the UPS and AVR, such as: POWERCOM, APC, POWEREX, DELTEK, MERLIN GERIN, MGE, UPSTRONIC etc. To repair and troubleshoot and replace the defective parts. To deal also to the Client making demo of our Product. I encountered also the single phase and three phase system, DELTA to WYE and WYE to DELTA. Also installing the Redundant system to eliminate the Power failure even in a long hour Brownout, also during in working condition the other one unit is subject in maintenance to clean and parameters check up without the cut off of the supply come from the UPS.
Company : SYSTEM 10 ALARM
Position : Fire and Security Alarm Technician
Dated : Jan., 1997 to Mar., 1998
Job Description :
Installing and repairing the local security alarm, Fire alarm, CCTV, Access control, Intruder alarm, PABX, Video Intercom. To install also ADEMCO fire alarm equipment. Troubleshooting and replace all electronic parts if there is a Problem. Parameters check up all system testing and commissioning.
Company : LINK ASIA (Alarm System)
Position : Fire and Security Alarm Technician
Dated : Jan.,1994 to Jan.,1997
Job Description :
Installing and repairing the local security alarm, Fire alarm, CCTV, Access control, Intruder alarm, PABX, Video Intercom. To install also ADEMCO fire alarm equipment. Troubleshooting and replace all electronic parts if there is a Problem. Parameters check up all system testing and commissioning. Also repair and install Cash and Vault with mechanical and electronic Timer.
Company : Self Employed or Free Lance
Position : Bio-med Equipment Technician
Dated : Jan.,1991 to Jan.,1994
Hospital Covered : U.E.R.M, M.C.U., F.E.U.
Job Description :
Installing and repairing various equipment such as ECG monitor and ECG recorder, ECG Central monitor, Defibrillator, Sterilizer, Incubator, microscope, centrifuge, oxygen gauge and suction machine Troubleshooting and replace spare parts, cleaning and parameters check up all electronic mention above. Also repairing the pneumatics problem of the oxygen gauge and suction machine and B.P. Apparatus. Repainting and cleaning the incubator, microscope and Dental chair, O.R. table, also repair the problem for the hydraulic And pneumatic system.
Company : POLYGRAPHICS TRADING
Position : Electronic Technician
Dated : Jan. 09, 1991 to Mar. 09, 1992
Job Description :
Installing and repairing the graphics machine, plate maker. Troubleshooting and replace the electronics spare parts of the unit. Also cleaning and the parameters check up.
Company : TOWER MEDICAL DISTRIBUTING COMPANY
Position : Bio-med Equipment Technician
Dated : April 03, 1989 to Feb. 28, 1991
Hospital Covered : PHIL. HEART CENTER, LUNGS CENTER, VETERAN HOSPITAL
Job Description :
Installing and repairing various equipment such as ECG monitor and ECG recorder, ECG Central monitor, Defibrillator, Sterilizer, Incubator, microscope, centrifuge, oxygen gauge and suction machine troubleshooting and replace spare parts, cleaning and parameters check up all electronic mention above. Also repairing the pneumatics problem of the oxygen gauge and suction machine and B.P. Apparatus. Repainting and cleaning the incubator, microscope and Dental chair, O.R. table, also repair the problem for the hydraulic and pneumatic system.
EDUCATIONAL BACKGROUND :
Elementary : Altura Elementary School
Date Graduated : 1972 to 1978
Vocational School : Elpidio Quirino High School
Course : Radio Technician
Date Graduated : 1979 to Dec. 20, 1980
High School : Elpidio Quirino High School
Date Graduated : Mar. 1981 to Mar. 21, 1985
Vocational School : Araullo High School
Course : T.V. Technician
Date Graduated : 1986 to Mar. 31, 1987
GENERAL INFORMATION :
Birthday : September 02, 1965
Place : Manila
Civil Status : Married
Citizenship : Filipino
Telephone :Phil.: +639211965340,09664631475
Passport no. : P1267480A
Date issued : Dec. 16, 2016
Date Expired : Dec. 15, 2021
Driver’s License no. : N03-00-287045