Education

1990 to 1994 DIPLOMA OF ASSOCIATE ENGINEER IN CIVIL TECHNOLOGY at Govt College of Technology, Lahore, Punjab,Pakistan.

2006 to 2008 B-TECH in Civil Technology at PIMSAT, Karachi, Sindh, Pakistan.

2008 to 2010 B-TECH HONS in Civil Technology at PIMSAT

Experience

Aril, 2016 to NOV, 2018 QC MANAGER at MASAH SPECIALIZED COSNRUCTION

PROJECT INTRODUCTION:
The project is located in Al Khobar, Eastern Province, and Kingdom of Saudi Arabia. The project consists of a single basement, ground floor, four podium parking floors, eight residential floors within the lower rise portion and 36 residential floors within the high-rise tower. The development will contain residential apartments, amenities and multipurpose areas with terraces. The building height measured from the grade level is approximately 130 m to the highest occupied floor and 136 m up to the highest roof surface. Hence, the building is classified as a high-rise building per GCC.
DUTIES AND RESPONSIBILITIES

 The primary responsibility is to ensure the products meet with the standards and applicable codes& standards and project specification. Responsible for the product achieving the entire requirements of client by implementation of quality based civil engineering practice during execution.
 Responsible for the overall supervision for execution of site activities of Civil Structure RCC and steel structure, as per approved drawings and specifications & international codes& standards.
 Responsible for the critical issues such as installation of steel reinforcement for civil structure and steel structure elements Fabrication and Erection.
 Responsible for the site inspection and Liaison with client discipline representatives to establish technical direction where not provided by codes & standards planning of site activities including sequence of work for execution and manage / allocates the site team for construction activities.
 Distribution of the drawings & project specifications and construction information for Execution team.
 Responsible to implement the approved drawings at site with well planned civil engineering practices
 Preparation of guideline for junior staff, site engineers, site foreman, MEP engineers for site coordination and providing assistance for coordination drawings between all disciplines.
 Monitoring of all site activities with Execution plan in accordance with sequence of work.
 Monitoring of site progress and Preparing of Daily activity Report and overall progress on weekly /monthly basis & monitoring of the Progress of Works according to the Scheduled Program and issuing necessary Instructions for speeding up in order to avoid delay.
 Review and proofread plans, specifications, codes, shop drawings, submittals, procedures, reports. Memos, status reports, change order days.
 All correspondence between Client and Contractor engineer, testing agencies.
 Preparation of working drawings and working sketches for site execution work.Establish and maintain all Testing Agency correspondence, supplemental instructions, and sketches for site execution works.
 Allocates Project management team and personnel to the various areas of site activity.
 Responsible for form work and concrete work as per approved drawings and project specifications.
 Responsible for quality of Material and mockup samples as per material submittal approved and manufacture requirements and details.
 Report to the Project Manager any deficiencies in the operation of site Management & Control System.
 Supports the Project Management teams in dealing with the Client for all the site and Quality matters.
 Responsible for the implementation of the Project Execution plan, Quality Plan and Quality Control Plans on the site of execution.
 Preparation and Verification of Progress invoices based on Interim payment certificates and preparation of measurement sheets, cost sheets accordance with approved drawings for IPC. Preparation of claims & variation order and providing assistance and guide lines to quantity surveyor for invoices and Rate analysis for bidding.
 Preparation of contract documents and bill of quantity and cost sheet based on rate analysis.
 Establish the management system for reports and documents issued by client and consultant and collect and file the required for document Records.
 Review the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Preparation of concrete testing logs and tracking logs for document. Preparing PQP and the implement of QA QC Plan for the Project and Assistance and Reporting to Project Manager.Review of Daily QC Reports and updated NCR / MIR / RI / WIR/ RFI status reports and tracking logs.
 Supervision of all concrete works including steel reinforcement and form work as per drawings including monitoring of concrete Quality during casting (Temp, slump test & compressive strength, fresh concrete density, core testing of concrete, Compression Lateral , Tension testing for Piles)

B. PROJECT: Al-Habib Hospital Khobar
LOCATION: Khobar, Eastern Region, Saudi Arabia
DESIGNATION: SENIOR SITE ENGINEER & PROJECT COORDINATOR

PROJECT DETAIL:
DR. SULAIMAN AL HABIB HOSPITAL
Total Covered Area 200,000 Square Meter The responsible for civil structure RCC works, building project consists of frame structure, foundation type pile cap transferring load through piles, basically, this is hospital building consists of three towers and area divided into 3 zone and structure divided into 6 parts by movement / expansion joints.

DUTIES AND RESPONSIBILITIES
 Responsible for the overall supervision for execution of site activities of Civil Structure RCC and steel structure, as per approved drawings and specifications & international codes & standards.
 Responsible for the critical issues such as installation of steel reinforcement for civil structure and steel structure elements Fabrication and Erection.
 Responsible for the site inspection and Liaison with client discipline representatives to establish technical direction where not provided by codes & standards planning of site activities including sequence of work for execution and manage / allocates the site team for construction activities.
 Distribution of the drawings & project specifications and construction information for Execution team.
 Responsible to implement the approved drawings at site with well planned civil engineering practices
 Preparation of guideline for junior staff, site engineers, site foreman, MEP engineers for site coordination and providing assistance for coordination drawings between all disciplines.
 Routine site inspections and periodical offsite inspections and Implementation of the construction management plan programmed for the project and Ensuring that inspection systems and controls are implemented and comply with project specifications and International codes.
 Preparation of inspection and test plans, and checklist-sheets jointly with Site In-charges. Monitoring of testing procedure and system as per specified standards and codes and Ensuring that all test reports are verified to meet the contract requirements
 Report to the Project Manager any deficiencies in the operation of Quality Management & Control System.
 Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records.
 Supports the Construction Manager in dealing with the Client for all the Quality matters. Assesses the implementation of the Quality Plan and Quality Control Plans on the site.
 Preparing the meeting agenda and preparation and arrangement of minutes of the weekly meeting.
 Supports and participate to all the internal/external audits.
 Issue and administer Non Conformance Reports as necessary and ensure follow-up and follow up Analysis of NCRs for determination of route cause.
 Responsible for quality of Material and mockup samples as per material submittal approved and manufacture requirements and details.

MAY,2010 to APRIL, 2016 CIVIL ENGINEER at SAUDI COSNUTING SERVICES

 PROJECT: DAMMAM UNIVERSITY
 ADMIN BLOCK TOWER 14 STOREY
(Civil structure with Post Tension slab system)
 ATRIUM HALL
(Civil and Steel structure)
 MULTIPURPOSE HALL
(Civil & steel structure)
 INFRASTRUCTURE
(Roads, Parking Areas, Utilities Services/ chilled water supply and return lines& Valve Rooms / water supply and Sewerage pipe line including Manholes/ electrical Duct bank and Manholes)
 PROJECT KING ABDULLAH ECONOMIC CITY
LOCATION: JEDDAH, KINGDOM OF SAUDIA ARABIA
DESIGNATION: MATERIAL ENGINEER
PROJECT DISCRIPTION:
INFRASTRUCTUREWORK
Sewerage, Storm Drainage and Irrigation system, Construction of Irrigation Tanks (4nos of each Capacity 1000m3), Lifting stations (5nos), Pounding Areas for storm drainage water (6nos, Capacity from 1200m3 to 16500m3) Sewer Pumping stations, Electric duct banks, Internal roads.

 PROJECT: KING SAUD UNIVERSITY GIRL’S CAMPUS
LOCATION: RIYADH, KINGDOM OF SAUDIA ARABIA
DESIGNATION: CIVIL ENGINEER
 KING SAUD UNIVERSITY (GIRL CAMPUS) RIYADH
Civil Structure & Precast Building System
 SPORT CAMPUS (STADIUM) IN KSU RIYADH
Civil / Steel Structure with space frame roof & Precast Building System
 FOOTBALL STADIUM PROJECT KSU RIYADH
Civil / Steel Structure with space frame roof & Precast Building System
 INFRASTRUCTURE
(Roads, Parking Areas, Utilities Services/ chilled water supply and return lines& Valve Rooms / water supply and Sewerage pipe line including Manholes/ electrical Duct bank and Manholes)

DUTIES AND RESPONSIBILITIES:
 Primarily responsible for the overall supervision of Civil, Structure, steel structure and infrastructure as per approved drawings and engineering practices, economic principles calculation methods, international codes, standards, procedures, and specifications.
 Responsible for reviewing civil / structural shop drawings to ensure its compliance with design requirements and to ensure that it has been properly coordinated with other disciplines
 Responsible for Review and Verification of executed Jobs of civil work for as build drawings and Completion of necessary documentation to verify the work performed
 Liaison with client discipline representatives to establish technical direction where not provided by codes & standards
 Routine site inspections and periodical offsite inspections and Implementation of the Quality Control programmed for the project and Ensuring that inspection systems and controls are implemented and comply with project specifications and International codes.
 Preparation of inspection and test plans, and check-sheets jointly with Site In-charges. Monitoring of testing procedure and system as per specified standards and codes and Ensuring that all test reports are verified to meet the contract requirements
 Responsible for personal safety & safe working practice. Understand and follow procedures, Extensive working knowledge of design in Hazardous Areas.
 Quantity Surveying Preparing the measurement sheet for quantity of work, Verification and Preparing of Interim Payment Certificate (Billing), Costing & Estimating of Project.Review for monthly payment certificates, Calculation & Measurement of executed work
 Issue and administer Non Conformance Reports as necessary and ensure follow-up and follow up Analysis of NCRs for determination of route cause.
 Responsible for quality of Material and mockup samples as per material submittal approved and manufacture requirements and details.
 Report to the Project Manager any deficiencies in the operation of Quality Management & Control System.
 Preparing of Daily activity Report and overall progress on weekly / monthly basis & monitoring of the Progress of Works according to the Scheduled Program and issuing necessary Instructions for speeding up in order to avoid delay.
 Completion of final Weight of Evidence Compliance documentation in relation to inspections, tests, non-conformances and material approval.
 Supervision of all CI concrete including steel reinforcement and form work as per drawings including monitoring of concrete Quality during casting (Temp, slump test & compressive strength, fresh concrete density, core testing of concrete, Compression Lateral , Tension testing for Piles).Supervision of Space Frame (Steel Structure) and other steel structure (assembly and erection) and material inspection as per approved material and design information
 Supervision of Civil, structure, Infrastructure and Precast Cladding work (Installation walls elements, hollow core slab elements, Terrace stepping bleacher elements at University / sport campus and football stadium)
 Supervision for underpass and roads works including asphalting and Earthwork

2004 TO 2010 SITE ENGINEER / QS at PACE PAKISTAN LIMITED

DUTIES & RESPONSIBILITIES:
• Primarily responsible for the overall supervision of Civil, Structure, steel structure and infrastructure as per approved drawings and specifications & international codes.
• Review and proofread plans, specifications, codes, shop drawings, submittals, procedures, reports. Memos, status reports, contractor’s minimum days, delay days, change order days and all correspondence between the architect, engineer, testing agencies, and the contractor.
• Establish and maintain all files, submittals, daily reports, and contractor daily reports.
• Establish and maintain all Civil engineering reports which include submittals, correspondence. Pay requests, change orders, meeting minutes, supplemental instructions, sketches, Requests for Information (RFI), Requests for Changes (RFC), and all correspondence between the architect, engineer, testing agency, and the contractor.
• Establish and maintain all Engineer’s reports which include submittals, correspondence, supplemental instructions, sketches, all correspondence between the architect, engineer, testing agency, and the contractor.
• Establish and maintain all Testing Agency correspondence, supplemental instructions, and sketches. Establish and maintain files for City inspections to include all correspondence.
• Establish and maintain all Contractors reports which include submittals, correspondence, supplemental instructions, sketches, Requests for Information (RFI), Requests for Changes (RFC), and all correspondence between the architect, engineer, testing agency, and the contractor. •
• Check and verify all materials stored on and off site for payment as well as materials used in site construction against submittals and check and verify the installation of materials and equipments Verification of executed Jobs as per dwgs & specification
• To Prepare Interim Payment Certificates, Verification of IPC & Sub-contractor Bills, Verification of Contractor Claims (Escalation on Labor, materials, Transportation) Material Calculations & Material statements
• Cost Estimation of Projects, B.O.Q Preparing & Tender Documentation and Specs-writing, Rate Analysis of item of works regarding to Civil structure, Infra-Structure, Interior and finishing works.
• Prepare Architectural, Interior, Structural Drawings. Drafting on Auto Cad 2d+3d and Detail drawings
• Preparing of cost sheet & Progress Reports Construction Account assistance and management
PROJECT: (HIGH RISE BUILDING, SHOPING MALLS , OFFICES, HOTELS)

1. Pace Shopping Mall Model Town Link Road (55,000 Sft)
2. Pace Shopping Mall MM Alam Road Lahore (115,000 Sft)
3. Woodland Housing Scheme 180 Houses
4. Pace Gujranwala (Main Building) (125,000 Sft)
5. Pace Gujrat (Main Building) (150,000 Sft)
6. Pace Circle, Near Air Port Lahore
7. Construction Pace Tower 30 Floors (500,000 Sft)