AL P. ALCANTARA
Email add: [email protected]
Mobile no.:+639183357393
OBJECTIVE:
To hold challenging position in a respectable company where I fully utilize my knowledge, capabilities, talents and skills. To have a great contribution of the company progress and have an opportunity for professional growth and rewarding career.
Job History
Position: Plumber (highrise building)
Duration: May 28, 2018 – February 31, 2019
Company: Imperial Pacipic International LLC
Industry: 5 star hotel, resort and casino
Location: Saipan, USA
JOB DESCRIPTION
Water lines
Installation/mock up of copper pipes from riser mainline to lavatory, water closets, shower and bath tub
Mainline diameter of copper pipe 6” and for the riser 3” branches 2”- 3/4.
Responsible of copper brazing/welding apply pump pressure 170 psi
Insulate the hot water line and return pipes.
Fire protection
Installation of Galvanized Iron pipes For fire protection of ceiling and stairs with the diameter 6”for mainlines 3” for main branches and 1 1/4” for sprinkler/up right
using victuallic clamps for joint.
installation of fire hydrant in stair.
Testing 230 psi pressure each room and stair.
apply red oxide paint on pipes and hanger.
Interpret drawings ang spicification of fire protection.
Sanitary lines
Check the drawings for the stamate of materials needed for bathroom and what sizes
Of pipes and kind pipes
locate water closet , shower mixer, buth tub, lavatory and floor drain
Cast iron pipes with hubless for the sanitary lines and apply standard distance of wc,
lavatory, floor drain and buth tub.
apply 2% of slope of pipes which is required for sanitary lines.
responsible of reading drawings for sanitary lines.
Position: Plumber Leadman
Duration: Feb. 2017- Sept. 2017
Company: Endeavour Mining
Location: Hounde, Burkina Faso, West Africa
Contract: Short Term (Finish Contract)
Job Description:
*Lead Plumbing works in Site With locals Plumber,sanitary Pipings/ Sewer lines from buildings To Septic tanks according to the drawing, using 110mm pvc pipes 160mm for main lines,digging with backhoes.
*estimation of materials, fittings of sewer lines,water supplies,bathroom fixtures, Length of pipes base on isometricworking plan.
*piping water supplies from tank to Buildings by using 90mm poly pipes mainlines and PPR pipes
*installation of Motors from well to tank.
*installation of water Heaters.
*installation of standard ventilation (VTR) vent thru roof of sewer lines such as Urinal, Lavatories, water Closets, and traps
*installation of bathroom fixtures, WC , Bath tubs, Shower Mixer,Urinal, Lavatories,etc.
*trouble shooting the toilet, clogging drains, W.C. not flusing, Shower Mixers Lavatories
*Responsible piping of supply of dam and going to plant using 350mm/400mm poly pipes with poly fusion/electric fusion welding Machine.
*install sewer piping system and high ambent/ temperature water and high plan.
*risers, flexible branches branches, expansion joint, pumps, gauges and pressure regulators in the combination needed to support the support of the system.
*Test piping system for leaks.
*responsible for reading and interpret engineer drawings,sketches, specifications and job plans.
*responsible for requesting materials and stock take.
Position: Technician and trade coordinator Supervisor/ Plumbing inspector
Duration: Jan. 2016 – Nov.2016
Company: Ray white real state/ Monian Limited
Location: Kavieng, Papua New Guinea
Contract: short term
Job description:
*Supervising all plumbing works in site sanitary lines toilets to septic tanks, down spouts, water supplies from well to tank installation of motors pressure switches, pressure tanks and water tanks weldings of gas pipes for preparation of cook hobs, Including trouble shooting.
*Supervise the installation, repair and maintenance of water, plumbing and heating systems; maintain records and files; prepare reports.
*Plan, schedule and assign the activities of plumbers.
*Supervise the installation and repair of hot and cold water, oil, steam or gas pipes and necessary connections.
*analyze reports and charts concerning worker utilization and job time rates.
*Establish work standards, production control, job priorities and preventative maintenance teams.
Make sketches for plumbing layouts and determine types and quantities of materials necessary.
Determine time and cost estimates for plumbing jobs.
Aid in obtaining materials necessary to complete the job.
Supervise plumbing shop and perform plumbing shop work and related jobs.
Assist staff with more difficult and complex projects.
Assist skilled workers of related trades in general plumbing maintenance work.
Maintain plumbing tools and equipment.
Perform related work as required.
Responsible for reading of drawings and spicifications.
Position: Leadman Plumber
Duration: July 2013 – July 2015
Company: AL QATRA CONTRACTING AND TRADING CO.
Location: Al Malaz, Riyadh, Saudi Arabia
Contract: 2 years (finish contract)
Job description:
Prepare the groundfloor plan/drawing for the dimensions of toilet,lavatories, kitchen sinks,well for water supplies and locate the locations of septic tank etc.
Marked the area of partitions of toilets, lavatories, kitchen sinks, sanitary lines, locations of plumbing works.
Check the diameter/types of pipes that you are going to use before its install according to the plan.
Locate the position and distance lavatories, water closet
Locate the partitions of blocks of kitchen,water heater, and toilet for the location of sanitary and water supply pipes.
Inspect their works regularly to prevent leackage or wrong piping.
Check the sealng gaps of their works of sanitary fixtures bath tubs, wash basins, water closets, bideth spray etc.
Follow all safety standards stipulated in case of any job discrepancies
Maintain cleanliness at all times.
Position: Plumber
Company: Hyundai Engineering and construction Corp.
Duration: March 2008- April 2010
Location: Manticao, Misamis Oriental
Contract: 3 years
Job Description
Estimation of materials, fittings of sewer lines, water supplies, bathroom fixtures, Length of pipes base on isometric working plan.
Interprets blueprints and building specifications to map layout for pipes, drainage systems, and other plumbing materials
Installs pipes and fixtures, such as sinks and toilets, for water, gas, steam, air, or other liquids
Installs supports for pipes, equipment, and fixtures prior to installation
Assembles fittings and valves for installation.
Installation of sewer lines from building to septic tank base on the plumbing plan
Installation of ventilation thru roof
Installation of bathroom fixtures, WC, lavatories, showers,and urinal and apply standard height and distance.
Trouble shoot of leaking pipes, clogged pipes, not working motors and water heaters.
Modifies length of pipes, fixtures, and other plumbing materials as needed for a building
Uses saws and pipe cutters as necessary
Collaborates with contractors, construction workers, electricians, pipefitters, and steamfitters in installing and repairing plumbing
Tests plumbing systems for leaks and other problems
Analyses problem and identifies appropriate tools and materials for repair
Chooses plumbing materials based on budget, location, and intended uses of building
Follows health and safety standards and complies with building codes
Writes report documenting the problem and summary of actions taken
Performs inspections of plumbing systems to identify and replace worn parts
Prepares bids and schedules and oversees other workers, such as apprentices and helpers
Personal Details
Address: Punta Silum, Manticao, Misamis oriental, Philippines.
Born: March 17, 1982
Age: 32
Gender: Male
Civil Status: Single
Educational Attainment
Qtek training and assestment Center inc.
Plumbing National Certificate (NC11)
February 2016
Bukidnon State University
Business administration
Major in marketing
june 2003 – March 2006
Lugait Technical and Computer Technician
Vocational Course
June 2007- March 2008
I hereby certify that the above information written are truth and correct to the best of my knowledge and ability.
Al P. Alcantara
Applicant’s signature