Marlon T. Albarracin

Name

MARLON T. ALBARRACIN
Email Add

09672962245/09611382586
Date of Birth

January 5, 1968
Education

Bachelor of Science in Civil Engineering, Misamis University, Ozamiz City, Phil.
Profession

Registered Civil Engineer, PRC No.75119
Position Applied

Key Qualifications

Civil Engineer, Civil Works & Structural Inspector, Site Civil Engineer, Sr. Project Engineer, Co-Team Leader/Drainage Engineer, Quantity Surveyor
Objectives

As an employee I strive to make significant progress in the company, and I use my skills as an engineer and I will do everything to overcome the project and complete the project to be proud of our clients.
Skill

MS-Project , MS-excel, MS-Words, AutoCAD Software, Surveying, Quantity Take-off & Cost Estimation, Project Supervision
TRAININGS & CIMENARS:
§ Construction safety and health Course for Site Safety Officer, Conducted by: DTI-Department of trade and Industry Construction manpower development foundations held at Pearl Mont Inn, limketkai Drive, Cagayan de Oro City, Philippines Dated at December 06- 10, 2010

§ Rehabilitation of Our Track and Field Oval, Don Gregorio Pelaez Sport Center, Province of Misamis Oriental, Cagayan de Oro City September 12, 2008- September 13, 2008

§ Orientation on the Standards of Civil Works and Documents Conducted by: IPHO-Integrated Provincial Health Office Oroquieta City, February 04-05, 2008

§ Personal & Leadership Values Time Management & Matrix Structural Analysis, Conducted by: Misamis University, Ozamiz City Phil. Held at Media Center, Misamis University, February 24 – 26, 1994
SUMMARY/EMPLOYMENT RECORDS:
Date

April 2019 – Present
Employer

WCI-WOODFIELDS CONSULTANTS, INC., 153 Kamias Road Extension, Kamias, Quezon City, Philippines
Position

Co-Team Leader/Drainage Engineer

Date

February 2018 – December 2018 (10-Man-Months)
Employer

MCGPI-MC GEOMETRIC PROPORTION INC., 6 Flr. Westgate Tower, Ayala Alabang, Muntinlupa City, Philippines
Position

Sr. Project Engineer

Date

May 2017 – December 2017 (7-Man-Months)
Employer

PhiiCoMSCI – PHILIPPINE CONSTRUCTION MANAGEMENT SPECIALIST Co. Inc. Paz St. Paco Metro Manila, Philippines
Position

Civil Works & Structural Inspector

Date

February 2015 – February 2017 (24-Man-Months)
Employer

MOHAMMAD AL-BARGHASH AL-MANSOURI SON & TRADING Co. Main Office 31952 Kingdom of Saudi Arabia
Position

Civil Engineer

Date

October 2013 to December 2014 (14-Man-Months)
Employer

ENASIA IMPORT EXPORT CORPORATION,907 Dasma Corporate Center

321 Dasmariñas St., Binondo, Manila Philippines
Position

Civil Engineer

Date

November 2012 – September 2013 (12-Man-Months)
Employer

DAR AL RIYADH CONSULTING CO.,PO Box 250170 Riyadh 11391 Saudi Arabia
Position

Civil Engineer

Date

September 2011 – November 2012 (14-Man-Months)
Employer

SINIAN INTERNATIONAL CORPORATION, 9/F Rm.902 M Natividad Bldg. 470 TM Kalaw Ave. Ermita Metro Manila, Philippines
Position

Project Engineer

Date

January 2000 – February 2011 (132-Man-Months)
Employer

CITY ENGINEERING OFFICE Planning & Design Section Division , Tangub City, Misamis Occidental, Philippines
Position

Engineer-I (Quantity Surveyor / Structural Inspector)

Date

January 1999 – January 2000 (12-Man-Months)
Employer

DPWH-DEPARTMENT OF PUBLIC WORKS & HIGHWAYS, Construction Division, District Office, Tangub City
Position

Resident Engineer (Casual)

Date

February 1997 – November 1998 (22-Man-Months)
Employer

Nelson S. Lee Construction, Don Anselmo Bernad Avenue, Ozamiz City
Position

Project Engineer
PROJECT EXPERIENCES:

Duration of Assignment

April 2019 – Present
Employer

WCI-Woodfields Consultants Inc. 153 Kamias Road Extension, Kamias, Quezon City, Philippines
Position

Co-Team Leader/Drainage engineer
Client

DPWH- Department of Public Works & Highways & LGU-Local Government Unit
Project Title / Location

Feasibility Study of Urgent Bacoor & Imus River Improvement project (FRIMP-CTI-CS-SA4, Bacoor City, Cavite Province
Project Description

Feasibility Study of Bridges & River Improvements
Duties & Responsibilities

· Support the Team Leader in overall management and supervision of the study team

· Collection, review and analysis of related data and information

· Investigations on existing bridges & drainage system

· Investigation of existing land use, future land use plan and development plans

· Study on treatment of tributaries and drainage

· Preparation of related parts of reports

Duration of Assignment

February 2018 – December 2019 ( 10-Man-Months)
Employer

MCGPI-MC-GEOMETRIC PROPORTION INC., 6 Flr. Westgate Tower, Ayala Alabang, Muntinlupa City, Philippines
Position

Sr. Project Engineer
Client

DPWH- 4th district Lipa City, Batangas Province, Philippines
Project Title / Location

• Construction of Lodlod Bridge, Brgy. Purok-4, Lodlod, Llpa City Batangas

• Re-Blocking of Brgy. Concrete Roads / Asphalting, Lipa City Batangas
Project Description

Construction of Road & Bridges
Duties & Responsibilities

· Inform to DPWH 4th district office for finalized the As-take survey & record the data for references of re-blocking/demolition of existing concrete paving .15m thk

· Request to DPWH Materials Engineer to conduct FDT for compaction of sub base course, aggregate base course & embankment compaction

· Informed the DPWH office for schedule of installation: (PCCP) Concrete poured, Asphalt Overly and concreting of bore pile @ Lodlod bridge

· Checking and monitoring for application of Reflectorized Thermoplastic Pavements Markings

· Checking the traffic signage’s before road concreting, road asphalting overly & demolitions of any existing structures

· Prepared back up computation of any variance order

· Prepared Request For Inspection (RFI) to DPWH

· Checking the work of sub-contractor@ lodlod bridge to ensure that the work is based on plan and contract agreements

· Checking the bore pile deep excavation In meter & checking the rebar’s of bore pile to ensure that the subcontractor follow the plan & spec.

· Checking equipment’s use during concreting of roads and pouring of asphalt overly on actual site preparations

· Report to the DPWH of any delayed/problems encountered on site implementations

· Prepared weekly progress report of any projects handle

· Monitoring & supervising the ongoing projects handle

· Coordination of DPWH-Head of Office, Resident Engineer/Materials Engineer & MCGPI – Construction Manager & Project Manager

Duration of Assignment

May 2017 to December 2017 (7-Man-Months)
Employer

PhiiCoMSCI – PHILIPPINE CONSTRUCTION MANAGEMENT SPECIALIST Co. Inc. Paz St. Paco Metro Manila, Philippines
Position

Civil Works & Structural Inspector
Client

· Anaprel Development Inc. 109 LP Leviste St. Salcedo Village, Makati

· Unison Motor Corporation, 1972 Taft Avenue, Pasay City, Metro Manila
Project Title / Location

· Construction of 20 Units 3-Storey Subdivision Residential Building, Sta Lucea, San Juan Metro Manila

· Proposed 8- Story Commercial Building, Brgy. San Isidro, Pasay City, Metro Manila, Philippines

· Proposed Showroom & Warehouse Compound Building, Molino Blvd., Bacoor City, Cavite Province
Project Description

Commercial and Residential Building Construction
Duties & Responsibilities

· Study the shop drawing & general specification issue for bidding versus issue for construction to check the difference of architectural & structural before beginning implementations of project

· Prepared minutes of weekly meetings of the site construction firms main contractors and sub-contractors

· Accept the Request For Inspection (RFI) of the contractors

· Checking the work of the contractors to ensure that the shop drawings & specifications is carried out by the contract agreements

· Attend during concrete pouring and observe that the concrete mix design which carried out as per contract design.

· Report to the Construction Manager of any problems on site construction, and the other comments of the client’s representatives.

· Taking picture of any defected works of the construction site

· Prepared memorandums of the contractors for repeated works

· Regularly daily site visit of construction to observed preparation of the contractors

· Prepared site Instruction of the main contractor of any defected area of the building constructions

· Follow up the shop drawing issued for construction to the architectural & structural engineer

Duration of Assignment

February 2015 to February 2017 (24-man-months)
Employer

MOHAMMAD AL-BARGHASH AL-MANSOURI SON & TRADING Co. Main Office 31952 Kingdom of Saudi Arabia
Position

Civil Engineer
Client

· Saudi Aramco, Dharhan Kingdom of Saudi Arabia

· SEC-Saudi Electricity Company, P.O.Box 22955-Riyadh 11416-KSA
Project Title / Location

· Offset of Work for Rehabilitation of AI-Mu’jjiz Terminal Onshore Facilities

Project, Yanbu KSA ( Saudi Aramco)

· SEC PP-13 Sales Gas Delivery System Project, Dhurma, Riyadh KSA
Project Description

Oil & Gas Project
Duties & Responsibilities

· Participate in surveying to lay out installation and establish reference points, grades and elevation to guide the construction site.

· Site supervision of earthworks excavations, backfilling materials and earth compaction.

· Check the alignment and the elevation of all structure foundations of the project involved.

· Checking and monitoring of all formworks installation and scaffolding installation to ensure that the preparation is safety free for conc. pouring

· Check the rebar’s schedules, splicing and check the concrete still covering to ensure that the design schedule is follow by the foreman.

· Checking and review the materials delivered on site to ensure that the quality and specific is carried out of the shop drawings and specifications.

· Coordination and inform the QA/QC which the rebar works and formworks is ready for concrete pouring and it should be informed the ARAMCO PID representative for the final inspections.

· Attend during concrete pouring and observed the concrete mix design which carried out as per contract design.

· Check the elevations and thickness of sub-grade, sub base, aggregate base coarse, asphalt binder coarse and asphalt surface coarse.

· Inspection during the asphalt pouring to ensure that the subcontractor is followed by the shop drawing and the ARMCO standard specifications.

· Report to the Construction Manager of any problems on site construction, and the other comments of the client’s representatives,

· Preparation of weekly progress report and submit to the Planning Engineer.

· Coordination of client representative and attend the weekly meetings to discuss of any discrepancies of the project problems.

· Quantity take off of civil works and prepare the Variation Order based on IFB vs IFC issued by the shop drawings from the Engineering Designer.

Duration of Assignment

October 2013 to December 2014 (14-Man-Months)
Employer

ENASIA IMPORT EXPORT CORPORATION,907 Dasma Corporate Center

321 Dasmariñas St., Binondo, Manila Philippines
Client

Position

Civil Engineer
Project Title / Location

Construction of Factory Plant, San Sebastian Kawit Cavite, Philippines
Project Description

· Construction of 4-story staff house Office building – 1 unit and Construction of 3-story Administration Office Building – 1 unit

· Construction of 1-story Clinic Building – 1 unit, Construction of Guard house – 2 units and Construction of 1-story Storage Building – 1 unit

· Construction of Fabrication Buildings (35m X 78m) – 3 units and Construction of Raw Materials Building (35m X 78m) – 1 unit

· Construction of Access Road Concreting, Drainage & Sewerage System, Water Supply System
Duties & Responsibilities

· Checking and review the shop drawing issued by the construction to ensure that all documents used on site w/approval of authorized personnel

· Checking the actual site works, rebar’s work schedules, form work, scaffolding, elevations, dimension of foundation & columns, exposed beams & tie beams, structural steel, steel trusses & roofing, coating works, ceiling works, tile works, masonry works, plumbing & sanitary works, concrete paving, perimeter fence, backfilling & excavations,

· Co-ordinates the surveyors of any site activities to ensure that set and level, alignment, survey coordinates is accurate and references point of survey is the guideline for the construction site.

· Monitoring of daily record activities of site construction, manpower schedule, equipment’s, weather chart conditions

· Checking the elevation of Access road concreting, sub-grade, sub-base, aggregate base course and concrete paving

· Checking the slope of drainage & sewerage system, laying of RCCP, Catch basin & water cistern tank

· Prepared daily accomplishment and submit the weekly progress report

· Checking the materials coming on site to assure that all delivered is carried out of the shop drawing & general specifications

· Attend during concrete pouring and observe that concrete mix design is carried out by the design mix specifications and record the concrete temperature test and slump test.

Duration of Assignment

November 2012 to September 2013 (10- man-months)
Employer

Dar Al Riyadh Consulting Co.,
Client

MOT- Ministry of Transportation, PO Box 250170 Riyadh 11391 Saudi Arabia
Position

Civil Engineer
Project Title / Location

Completion of Some Roads in Aseer Region Group-8, Abha Saudi Arabia
Project Description

Construction of Road Asphalting & Bridge Construction
Duties & Responsibilities

· Coordination to the surveyor to check the grades and elevations.

· Undertaking work on site such as bridge inspection and daily site supervision

· Checking the formworks and scaffolding to ensure for safety and solid supports before concrete poured.

· Checking the rebar’s retaining wall, bridge pier rebar and foundation rebar’s, cantilever rebar’s, superstructure rebar’s, concrete box culver rebar’s.

· Checking the embankments methodology of compaction to ensure that the procedure followed by the contractors.

· Checking the thickness of subgrade. sub base, aggregate base coarse, bitumen base coarse and bitumen wearing coarse

· Prepared daily diary records of any actual activities on site and the number of manpower, equipment and weather conditions.

· Report to the Resident Engineer of any problems and obstructions that are affecting the progress of works and to report that there are any discrepancy between the drawings and the bill of quantity.

· Approved and signing the RFI requested by the Contractor for inspection.

· Prepared and checked project design and assessment of calculation and drawings.

· Review all materials submitted by the Contractor for approval.

· Coordination with the Planning Engineer and submit the weekly progress report.

· Attend site weekly meeting and discuss the progress report and other related project problems of site construction.

· Review and check the contractor payment certificates and other duties as directed by the Resident Engineer.

· Attend during concrete pouring of any schedules to check and to observe that the concrete mix design which carried out as per contract design.

· Check the concrete slump test and concrete temperature to ensure that the works of contractor is followed by the concrete mix design.

· Coordination with the Materials Engineer that all materials used in construction performed is good quality and which carried out of shop drawings and general specification,

Duration of Assignment

September 2011 to November 2012 (13-Man-Months)
Employer

SINIAN INTERNATIONAL CORPORATION, 9/F Rm.902 M Natividad Bldg. 470 TM Kalaw Ave. Ermita Metro Manila, Philippines
Client

Manila Laguna Water District, Santa Rosa, Laguna Province
Position

Project Engineer
Project Title / Location

Manila Laguna Water District: Design and Construction of Deep Well Project, Paraon Subdivision, Biñan, Laguna
Project Description

Detailed Engineering Design and Construction Supervision
Duties & Responsibilities

· Checking and review the shop drawing issued by the construction division of Manila Laguna Water District

· Checking excavation and compaction, set and levels, rebar’s works, form works, concrete works, structural steel and perimeter fence.

· Prepared and request for site Inspection to the Manila Laguna Water District Office.

· Monitor the earth boring for every 1 or 2m deep bore and get the soil sample safety separate both sides.

· Monitor the installation of GI pipe line, flange, tee, elbow and gate valve and attend during the water test line.

· Attend the monthly meeting at the Manila Laguna Water District to discuss of any problems for implementation of the construction.

· Coordination with the Project Manager of Manila Laguna Water District to Inform that there is discrepancy between POW versus the shop drawing.

· Report to the main office or General Manager of any problems of the site constructions

· Prepared weekly and month progress report and submitted to the General Manager.

Duration of Assignment

January 2000 to February 2011 (132-Man-Months)
Employer

CITY ENGINEERING OFFICE Planning & Design Section Division , Tangub City, Misamis Occidental, Philippines
Position

Engineer – I / (Quantity Surveyor/Civil Works & Structural Inspector)
Project Title / Location

Government Infrastructure Projects, Design of Buildings Construction, Road Construction, Drainage System, Water Supply & Flood Control Rivers of Tangub City, Misamis Occidental, Philippines
Project Description

Planning & Design
Duties & Responsibilities

· Design of road construction & road slope protection, design of drainage box culvert and design of open line concrete canals & Public Building Constructions

· Checking the thickness of Sub base Course, Aggregate Base Coarse, PCCP- Portland Cement Concrete pavement to ensure that the design as per contract followed the contractors

· Checking the equipment’s on site before starting pouring of concreting & asphalting to ensure that activities could not delayed

· Checking the application of Emulsified Asphalt to ensure that the surfaces is clean & use the specific materials base on the drawings/POW or contract agreements

· Checking the thickness of asphalt overly wearing coarse laying & check the actual site temperature of asphalt

· Prepared quantity & cost estimates of roads & asphalt overly including manpower & equipment’s

· Conduct site inspections of any completed projects requested by the contractor for final billing certificates.

· Check and review the work of the contractors to ensure that the shop drawings and general specification is carried out by the contract agreements.

· Checking rebar’s work, formworks and the dimension of concrete structures base on the shop drawings.

· Submit weekly progress report to the City Engineers of the on-going projects.

· Checking the line and grade to ensure that the building code and city ordinances were followed by the contractors.

· Prepare as built plan of any revision of infrastructure projects and submit to the City Engineers.

· Report to the City Engineer of any problems of the on-going project variances between original contract and the actual construction

· Prepared catch-up plan of the project slippage and given to the contractors for their guidance to recover the target duration plan.

· Prepared quantity take-off of job description: road concreting and road asphalting, school building constructions, Public building construction, embankments, excavations, open lining concrete canal, concrete box culven, grouted rip rapping, water supply, plumbing works, sewerage and drainage system and river flooding control

· Checking the statement of work accomplishment submitted of the contractors

· Received and signing the RFI of the contractors

Duration of Assignment

January 1999 to December 1999 (11 man-months)
Employer

DPWH-Department of Public Works & Highways, Tangub City, Misamis Occidental, Philippines
Position

Resident Engineer (Casual)
Project Title / Location

Building & Road Construction
Duties & Responsibilities

· Checking the reflectorized thermoplastic pavement marking white to ensure that the contractors are providing white stripes reflectorized object markings of the roadways

· Supervised and checked the location of eye roadways reflector Installation to ensure that carried out the plan and specifications.

· Prepared documentation affected of roadway expansion and coordination with the surveyor and records the data surveys of lot and structures affected the roadways expansions and report to the head of construction division of DPWH Checking the roadways grade design and elevations. Checking the procedure of compaction and check the subgrade, sub base, aggregate base coarse and PCCP

· Checking and monitoring for site construction safety.

· Maintain and arranged the filling system for all site memos and instructions and correspondences pertaining to the construction activities Taking photos in regular bases and also of any defective works

· Preparing daily record of construction activities, manpower, equipment and weather conditions.

· Prepared variation orders between the original plan versus the actual work activities and other revisions of structures.

· Report to the Construction head division of any problems on site implementations.

· Prepared as-built plan of any proposal revisions.

Duration of Assignment

February 1997 to November 1998 (21-Man-Months)
Employer

Nelson S. Lee Construction, Don Anselmo Bernad Ave. Ozamiz City, Philippines
Position

Project Engineer
Client

EMI-Enviroboard Manufacturing Incorporated, Brgy. Poblacion, Carmen Cebu Philippines
Project Title/Location

Construction of EMI-Factory Plant, Brgy. Poblacion, Carmen Cebu Philippines
Project Description

Building Construction, Fabrication & warehouse Building, Drainage System & water Supply System
Duties & Responsibilities

· Review the shop drawing issued for the construction

· Participate with the Surveyor for the lay-out and establish the reference points, grades and elevations for guidelines of construction.

· Supervision of Civil Works & structural Works.

· Check the design sloping of 24″ diameter RCCP and check the elevation of catch basin and the locations.

· Prepared the material’s bill of quantities.

· Prepared the weekly progress report and submit to the Planning Engineer

· Checking formworks and scaffolding to ensure that the preparation is safety and durability.

· Report to the contractor of any problems that there are discrepancies between programs of work versus actual works.

Marlon T. Albarracin Civil Engineer