CURRICULUM VITAE

Randy Ani Bug-os
Batuan Maasin City, Southern Leyte
Cell #: 09568333588,09227723760
[email protected]

Position Applied: GTAW/SMAW (SS/CS)

CAREER SUMMARY:
Welder for more than 5 years and 6 months using GTAW, GTAW+SMAW process in construction, refineries, Gas Plant, Power Plant and Petrochemical Plant. Welding different kinds of materials such as carbon steel, low temp carbon, stainless steel, inconel, chrome alloy with 100% radio-graphic test.

EMPLOYMENT INFORMATION

Company: DAEAH E&C
Industry: Gas Plant
Address: Utmaniya, hufof KSA
Position: TIG Welder
Date: DEC. 27 up to JULY 10 2019

Duties and Responsibilities
Selects torch, torch tip, filler rod and flux, according to welding chart specifications or type and thickness of metal.
Connects regulator valves and hoses to oxygen and fuel gas cylinders, and welding torch.
Holds torch at proper angle to metal and guides along weld joint, applying fill Examines weld for bead size and other specifications.
preheat workpiece in furnace or with torch.
Weld along vertical or overhead weld lines.
Chip or grind off excess weld, slag, or spatter.
Clean or degrease parts, using wire brush, portable grinder.

JOB DESCRIPTION:

BOILER WELDER from header bundle coil, reheater, super heater, crossover duct and any part of boiler. Welding different kinds of materials from CS, SS, P91,A335.Full welding of unlimited thickness.

Company: PHILSPEC INC. (SUNGCHANG E&C)
Industry: Power Plant
Address: Cagsiay II Mauban Quezon Province
Position: Alloy Welder (TUBE)
Date: Sept 15 up to present

Duties and Responsibilities

Welding different kinds of materials from CS, SS, P91, A335.
Full welding of unlimited thickness using filler wire 80S-G to B9.
Ensure that all operation concerning welding are carried out in complete compliance with company local and national safety legislation.
Complete welds on pipes according to specified materials.
Perform welding in pipelines and related facilities using welding torch and arcs.
Operate various welding processes SMAW/GTAW,SMAW combination in welding butt, socket and fillet joints.
Perform welding in all range wall thickness in minimum to maximum outside diameter.
Perform repairs on injected welds.
Operates oxy-cutting for cutting supports.
Proficient on X-ray welding of materials both carbon steel and low temperature metals.
Perform quality welding actions as per as Welding Procedure Specification (WPS) and
ASME CODE.
Carries out a variety of high pressure and general welding.
Work mainly in fabrication workshop and outside using TIG/ARC welding process.
Full welding of butt joints small bore pipes from 2” up to 10” diameter of high steam line using filler metal ER70S-2,3 and E7018 welding rod.
Ensure safety practices, and housekeeping environment before and after to maintain the highest standard.

Company: KTI PHIL INC.
Industry: Power Plant
Address: Brgy. Bato, Toledo City Cebu.
Position: Alloy Welder (TUBE)
Date: August 01,2016 to August 10, 2017

JOB DESCRIPTION:

BOILER WELDER from header bundle coil, reheater, super heater, crossover duct and any part of boiler. Welding different kinds of materials from CS, SS, P91,A335.Full welding of unlimited thickness.

Duties and Responsibilities

Boiler welder from bundle coil, reheater, super heater, crossover duct and any pressure part or non-pressure part in the boiler.
Welding different kinds of materials from CS, SS, P91, A335.
Can weld different position from 1G to 6G using mirror.
Full welding of unlimited thickness using filler wire 80S-G to B9.
Ensure that all operation concerning welding is carried out in complete compliance with company local and national safety legislation.
Complete welds on pipes according to specified materials.
Perform welding in pipelines and related facilities using welding torch and arcs.
Operate various welding processes SMAW/GTAW, SMAW combination in welding butt, socket and fillet joints.
Perform welding in all range wall thickness in minimum to maximum outside diameter.
Perform repairs on injected welds.
Operates oxy-cutting for cutting supports.
Proficient on X-ray welding of materials both carbon steel and low temperature metals.
Perform quality welding actions as per as Welding Procedure Specification (WPS) and
ASME CODE.
Carries out a variety of high pressure and general welding.
Work mainly in fabrication workshop and outside using TIG/ARC welding process.
Full welding of butt joints small bore pipes from 2” up to 10” diameter of high steam line using filler metal ER70S-2,3 and E7018 welding rod.
Ensure safety practices, and housekeeping environment before and after to maintain the highest standard.

Company: ZAMIL STEEL INDUSTRY LTD.
Industry: High Pressure Vessels
Address: 2nd Industrial Dammam Saudi Arabia
Position: Tig Welder
Date: April 02, 2014- April 05, 2016

JOB DESCRIPTION:

Weld different kinds of high pressure vessels from single wall vessel, multi wall vessel, cladded vessel, high thick vessel, reactor vessel, acetylene reactor, debutanizer tower, steam drum, storage tanks, heat exchanger, in different petrochemical plants/refineries and power plants in the Middle East Welding different kinds of materials from CS, SS, high alloy steel chrome 1-9.Full welding of unlimited thickness.

Duties and Responsibilities

Operate various welding processes GTAW,SMAW, FCAW, SAW combination in welding butt, socket and fillet joints.
Proficient on X-ray welding of materials both carbon steel and low temperature metals.
Can weld different position from 1G to 6G and can Weld Using mirror.
Can operate Plasma and oxy cutting.
Ensure the safety of work place by applying the safety of work procedure.
Using the Proper personal Protective Equipment and Gears for Safety Purposes and Implementing
Of Safety Procedure.
Prepare all the tools needed for Operation.(after the fitters completed fitting works)
Set-up air hose for pneumatic chipper use.
Read Blue print, welding drawing and symbols in fabricating.
Consult operation supervisor for work details.
Set up and perform CO2 automatic welding process,
Manually adjust Voltage and Ampere setting based on the automatic machine speed and bead size.
After the completion of CO2 automatic welding process, set-up FCAW welding machine.(wire use is DW100, 1.4 mm in diameter).
Perform welding up to 8 pass, appropriate to plate groove (mostly V-groove,6mm-16mm in
Thickness, 2 mm gap).
Perform ( 1F,2F,3F,4F and 1G,2G,3G,4G,6G) position welding using GTAW,SMAW,FCAW welding process welding machine use is ESAB, MILLER, LINCOLN.
Remove slag or flux upon every completion of welding process.
Perform Gouging of bead and make Groove (U-groove) if necessary, regarding to the block
Requirements based on drawing and blueprint.
Use Carbon and Air for Gouging process.
Perform Gas cutting using flame and thermal cutting when necessary to block work operation
Perform Grinding for the removal of spotters and other scratches.
Perform inspection of bead for weld Discontinuities such as undercutting
Excessive melt-through, Incomplete fusion, Incomplete joint penetration
Porosity, Cracks, Slag inclusions.
Operate 5 tons crane (optional) when Crane operator is busy. For lifting and reversing of block
Use of blow torches and high pressure flame for the removal of moisture inside T-type joint.
Perform Good Housekeeping upon completion of every operation
Perform repairs on injected welds.

Company: AMEM ENGINEERING QATAR
Industry: Treatment Plant
Address: Doha North, Doha Qatar
Position: Welder & Mechanical Fitter
Date: August 20, 2011- August 24, 2013

Duties and Responsibilities (Job Description)

Ensure all welding actions are accomplished in accordance in industry and standards, manufacturers, technical manual and the Key Performance Indicator(KPI,s)
Full welding of carbon steel pipes random or spool with fitting like tee’s and elbows
Ensure safety practices, and housekeeping environment to maintain the highest standard.
Perform types of welding in fabrication and erection with particular emphasis on GTAW+SMAW welding.
Perform all welding position (Flat, Vertical, Horizontal, Overhead) using SMAW E-6011 electrode for penetration and E-7018 for capping.
Assigned in splicing and full welding of I-beams 20ft w x 22ft h x and 1 inch t, double v-cut is applied by oxy-acetylene cutting, a good cut is good for less grind, we fabricate A- frame and hook the chain block for lifting and alignment, in heavy welding it must be braced and fixed carefully to avoid war page or distortion, after welding it has to be grinded partially to produce quality weld inside and out.
We are also assign to go in the field site for installing after all the fabrication works have been done, We splice the I-Beams by bolting, I would weld I-lifter 3/8 thick x 4 inch L, I would bevel it to make sure even just single bevel, the I-Beams would be lifted (14inc W x 16inch H x ¾ inch thick) 30ft L and hook the shackle to the I-lifter, welding is critical during this lifting operation so right amperage and weld pudding technique is important.
We would fabricate column footer, if the I-Beam have the size of 3/8 inch T x 6inch W x 8 inch L, Braces for I-Beams, Beam cross, Beam support, by these pre-fabrication of trusses it would make us easy to assemble components of trusses, but we have to establish first the pedestal for column footer to have stable foundation we would use string to have square measure in each corner.
Welding series of trusses on the top of space frame and brazing it for strength, string is needed from end to end to make an straight alignment.
After a day of work I make sure that machine, tools and equipment to be switched off specially tank and hose to avoid disaster.
Must clean the area after work.
Work mainly in fabrication workshop and outside using TIG/ARC welding process.
Full welding of butt joints small bore pipes from 2” up to 10” diameter using filler metal ER70S-2,3 and E7018 welding rod.
Good housekeeping before and after the work

MACHINES / TOOLS / EQUIPMENT / APPLICATIONS USED & HANDLED

Welding machine (GTAW,SMAW,FCAW, GMAW, ,SAW,)
Automatic CO2 welding (single and double torches)
Cutting torches manual (PLASMA/OXY-Acetylene)
Gouging torches
Grinder machine (portable both Electric & Pneumatic)
Pneumatic chipper
Bench drill
Magnetic drill
Wrenches
Power saw
10 tons over head crane
Measuring instrument (bead gauge, caliper, meter scale)
Press Machine
Roller machine

TRAINING’S & SEMINARS

Date Training / Seminar Title Presided By
Dec. 01,2012 Basic Occupation Safety and Health (BOSH) PHASE QATAR
June 2010 Shielded Metal Arc Welding CoreTrades Academy
July 2010 Gas Tungsten Arc Welding CoreTrades Academy

LICENSES AND CERTIFICATIONS

Name of License / Certificate Title License / Certificate # Validity
Shielded Metal Arc Welding(SMAW)NCII 17072202007733 March 17, 2022
Alloy Qualification(All tig) P91 until project end
Chrome alloy(All tig) B3
Inconel(ERNICr-3)(GTAW+SMAW) 15010156-2
CS(GTAW+SMAW) 15010146-1
SS(GTAW+SMAW) 309L
Pipe Welding(GTAW NCII) 11-002
Pipe Welding(SMAW NCII) 11-005

HIGHLIGHTS OF QUALIFICATION / CAREER RELATED SKILLS

Profound knowledge of appropriate safety practices in operation and even using of power hand tools.
Can cut steel from 1mm up to 50mm of steel with precision by using oxy-acetylene torch and plasma cutting.
Can perform different welding position: flat, horizontal, vertical, overhead
Groove: 1G, 2G, 3G, 4G, 5G, 6G
Fillet: 1F, 2F, 3F, 4F, 5F, 6F.
Proper knowledge of welding tools, welding symbols, welding codes, blueprint.
Knowledge in GTAW, SMAW, GMAW, FCAW, SAW.
Profound knowledge of welding Theories and Principles.

EDUCATIONAL BACKGROUND:
Libhu National High School (2006-2007)
Saint Joseph College (B.S Civil Engineering) (2007-2008)

TRAINING’S AND SEMINARS ATTENDED:
Gas Tungsten Arc Welding (GTAW)
Shielded Metal Arc Welding (SMAW
(Core Trades Academy, Mandaluyong City.)

PERSONAL DATA:

Date of Birth :May 30,1988
Place of Birth : Batuan, Maasin City So. Leyte
Age : 29
Civil Status : Single
Sex : Male Height : 5’5
Passport # : P3129971A
Valid Until : 21 May 2022
Provincial Add : Brgy. Batuan, MaasinCity So. Leyte Person to be contacted in case of emergency
SofronioAni cell#: 09227723760
River Side II Tambo, Paranaque City

I hereby certify that the above data are true and correct to the best of my knowledge and belief.

RANDY ANI BUG-OS

Applicant Signature