CURRICULUM VITAE
1.
PROPOSED POSITION
:
Civil Engineer, Quantity Surveyor, Estimator
2.
NAME
:
Rolando S. Bobis
3.
DATE OF BIRTH
:
August 01, 1963
4.
NATIONALITY
:
Filipino
5.
EDUCATION
:
Bachelor of Science in Civil Engineering
Registered Civil Engineer,
PRC No. 0113411
Contact Number
e-mail address
:
:
:
0063 956 468 6909
0063 917 538 4834 c/o Ruth Bobis Gutierrez
[email protected]
7.
KEY QUALIFICATION:
Mr. Rolando Bobis has over twenty (20) years of professional experience working in different construction firm as Civil Engineer, Quantity Surveyor and Estimator. His wide experience covered supervision and implementation of projects and detailed engineering and conceptual estimating for land development works, roads, parking areas, bridges, residential houses, low, medium and high rise buildings, airports, potable and fire water supply system, storm drainage system, sanitary waste water collection system, landscaping works, grandstand, cisterns, steel and reinforced concrete water tank, industrial buildings and other structures. He started out his career in small private company who engaged in constructing mass housing projects then joined in different large private company involved in constructing different structures. Then year 2006 later he started working as an overseas contract worker in the middle east and spent almost ten (10) years working in different international consulting engineering company. He is proficient and easy to excel in using different software such as Excel , Word, Power point, Auto CADD, with basic knowledge in STAAD, MS Project, Micro Station and Primavera project planner.
8.
OTHER TRAININGS:
:
a) Structural Steel Design Using LRFD
Held AT Hive Hotel & Convention Place, 68 Sct. Tuason,
Diliman , Quezon City, Phipippines on 23-25 August 2019
By RBRA (PRC Accreditation No. 2017-013)
b) STAAD Pro V8i
Held on May 06, 2012 to May 27, 2012 for 25 training hours
By MICROCADD TECHNOLOGIES COMPANY INC.
Cubao, Metro Manila
c) MS PROJECT 2007
Held on Dec18, 2011 to Jan 29, 2012 for 25 training hours
MICROCADD TECHNOLOGIES COMPANY INC.
Cubao, Metro Manila
d) Electrical Safety in the Construction Industry
Held on February 6, 2009
Philippine Institute of Civil Engineers
Eastern Province Saudi Arabia International Chapter 1-01,
Al-Khobar Kingdom of Saudi Arabia
e) Boysen Painting Seminar
Held on February 28, 2006 at Filinvest Land Inc. Office
San Juan, Metro Manila
f)H2S Breathing Apparatus Familiarization Course
Held at QATAR Gas Office @ Ras Laffan Qatar
Conducted by : Khalil Dodin / Qatar Gas
Course Date: 13 – Jun – 2006
g) Fire Fighting Course
Held at Qatar Gas, Ras Laffan Qatar
Conducted by : Qatar Gas Group
Course Date : June – 2006
h) Construction Project Management
Held at Quezon City, National Irrigation Administration
Conducted by: Quality Computer System Inc.
On August 20 – 21, 1999
i) Computer – Aided Cost Estimate
Held at Manila on August – September 1999
Trainer: CAD Vision Engineering Technologies
j) Computer — Aided Project Management
Held at Manila on September – October 1999
Trainer: CAD Vision Engineering Technologies.
k) Computer — Aided Design & Drafting (Auto – CADD)
Held at Manila on June – August 2002
Trainer: CAD Vision Engineering Technologies
9. LANGUAGE AND DEGREE OF PROFICIENCY
Speaking
Reading
Writing
English
Excellent
Excellent
Excellent
Filipino
Excellent
Excellent
Excellent
10.
1. COUNTRIES OF WORK
:
Philippines, Saudi Arabia and Qatar
11.
EXPERIENCES
:
FROM
:
March 11, 2017
TO
:
November 30, 2017
EMPLOYER/FIRM
:
Philippine Associated Smelting And Refining Corporation
POSITION HELD
:
Project Estimator / Senior Quantity Surveyor
Name of Project: PASAR’s Plant Infrastructures
Client: Philippine Associated Smelting And Refining Corporation
Isabel , Leyte
Project Description:
The scope includes upgrading, conversion and construction new part of PASAR’s infrastructure as part of support from the existing industrial plants such as Acid Plant, Extension of Smelting Building,
Concentrate Conveying, Concentrate Storage, Carbide Slag Stockyard, repair of Thickener Dewatering and New Slag Stockyard. Projects were all designed and constructed in such a way to maintain and to increase production as it plan for PASAR’s primary product the electrolytic copper cathodes the raw material used for manufacturing various kinds of electric cables and other copper products.
FROM
:
August 15, 2016
TO
:
November 15, 2016
EMPLOYER/FIRM
:
Valenzuela Solar Power
POSITION HELD
:
Project Engineer
Name of Project: Valenzuela Solar Power
Client: Valenzuela Solar Energy Inc.
Project Description:
The scope includes area development, conversion and landscaping for the former 11 hectares unused fishpond to a solar power panel farm to generate 8.6 megawatts of electricity in Valenzuela City. These also includes site preparation and earthworks, two (2) lane access roads (constructed in a 80 mm , 50 gravel bedding on 200 mm aggregate base, and 250 mm aggregate sub-base on selected fill material and on existing ground), storm drainage systems, potable water distribution system, one (1) administration bored piled control building, five invert (5) building and microwave steel tower.
FROM
:
September 27, 2012
TO
EMPLOYER/FIRM
:
:
March 20, 2015
Fahd Alireza Engineering Consultants
Al Subeiae Bldg. Al Khobar Saudi Arabia
POSITION HELD
:
Quantity Surveyor / Estimator
DESCRIPTION OF DUTIES:
a) Create/Prepare conceptual estimate, cost analysis and estimate planning, coordination and consolidation.
b) Review plans, drawings and specification and responsible for the preparation of Materials Takeoff (MTO), Detailed Cost Estimate, Summary Cost Estimate and other estimating works that includes direct and indirect costs in accordance with company procedures.
c) Assisting the development of final cost estimates, finalizing Request for Proposals (RFP) and Specifications from inception to completion.
d) Responds to queries and other clarifications forwarded by the contractors.
e) Prepares request for back-up quotation by sending e-mail to different suppliers.
f) Estimate prices of all items including addendum and other change trend notice.
g) Perform any other duties as assigned directly by the head of department or section.
FROM
:
July 04, 2010
TO
:
July 12, 2012
EMPLOYERS/FIRM
:
SOFCON-FOSTER WHEELER JOINT VENTURE
Twin Tower Bldg Al Khobar Saudi Arabia
POSITION HELD
:
Estimator/Cost Controller
DESCRIPTION OF DUTIES:
a) Prepare estimates including direct and indirect costs using first principles and norms in accordance with company procedures.
b) Analyzes cost/price data from suppliers/subcontractors, with the ability to generate comparative data (historical costs and other metrics) as part of the cost/price analysis.
c) Manages the development of estimates from inception to completion.
d) Continuing contacts with working and supervisory level personnel in engineering, procurement, construction and other vendor community
e) Prepares conceptual estimating, cost analysis and estimate planning, coordination & consolidation.
FROM
:
August 26, 2006
TO
:
June 01, 2010
EMPLOYER/FIRM
:
Worley Parsons Arabia
Cement Tower Building Al Khobar Saudi Arabia
POSITION HELD
:
Estimator
DESCRIPTION OF DUTIES:
a) Prepare estimates including direct and indirect costs using first principles and norms in accordance with company procedures.
b) Review and analyze all claims and change orders on project contracts.
c) Prepare cost comparison and analysis of estimate submitted by the contractors.
d) Prepare written estimate clarification (inclusions and exclusions).
e) Prepares and maintains a directory of suppliers, contractors and sub-contractors.
f) Providing general support to the area project team.
g) Coordinate and liaise with personnel in other departments to discuss and formulate estimates and resolve issues.
h) Prepare other duties that maybe assign in related to cost Estimating Works.
FROM
:
November 24, 2003
TO
:
April 30, 2006
EMPLOYER/FIRM
:
Filinvest Land Incorporated
P. Gomez St. San Juan Metro Manila, Philippines
POSITION HELD
:
Quantity Surveyor
DESCRIPTION OF DUTIES:
a) Responsible for the preparation and distribution of Technical documents to the contractors such as invitation to Bid, Instruction to Bidders, Bid Form, List of OSM and Bill of Quantities of every proposed projects.
b) Prepare/collate mathematical calculation of quantities of every item into clear, well-structured spreadsheets based on approved plan and Specifications
c) Prepare Cost Estimate of Probable amount of Materials, Labors & Equipment, amount of Owner Supplied Materials (OSM) and the cost covered by the Trade Contractors
d) Responsible for evaluation and checking of documents such as Variation and Change Orders on project contracts.
e) Participation in the negotiation of project contracts as required
f) Prepare and update the list of suppliers, contractors and subcontractors.
g) Prepare other duties that may be assign in related to other cost estimating works.
FROM
:
April 15, 2003
TO
:
November 15, 2003
EMPLOYER/FIRM
:
ECE Realty and Development Corporation
Park Avenue Mansion Pasay City Metro Manila, Philippines
POSITION HELD
:
Civil Estimator/Quantity Surveyor
DESCRIPTION OF DUTIES:
a) Study and review all the scope of works as assigned
b) Prepare materials take-off and it’s cost from tender drawings, including Actual Cost, Bid Cost, Budget Control Cost, Cost Breakdown, Additional and Change Order Cost
c) Prepare cutting list of rebar, back up by tender drawings as per structure when required
d) Providing full estimating services to ongoing projects and studies
e) Prepare and update the list of suppliers, contractors and subcontractors
f) Perform all duties (related to the nature of the job) assigned by the Project Manager
FROM
:
July 08, 2002
TO
:
January 31, 2003
EMPLOYER/FIRM
:
People’s Asia Pacific Construction Corporation
#277 Tomas Morato Avenue Metro Manila, Philippines
POSITION HELD
:
Estimator/Quantity Surveyor
DESCRIPTION OF DUTIES:
a) Prepare/collate mathematical calculation of quantities of every item into clear, well-structured spreadsheets based on approved plan and Specifications
a) Review and analyzes all claims and change orders on project contracts
b) Providing full estimating services to ongoing projects and studies.
c) Prepare bar bending schedule as when required
d) Attend site review and pre bid meetings where required
e) Perform all duties (related to the nature of the job) assigned by the Project Manager
FROM
:
April 22, 1993
TO
:
December 30, 2001
EMPLOYER/FIRM
:
GRUPPO CHK Industries
#43 Rincon Road Malinta Valenzuela Metro Manila, Philippines
POSITION HELD
:
Project Engineer
DESCRIPTION OF DUTIES:
a) Responsible for the supervision of projects in carrying out various activities based on approved plan and specification
b) Submit a report to the Project Manager regarding the status of projects, and some information needed to organize and control all the available resources in order to achieve maximum productivity
c) Provide an estimate for labor cost to serve as control tools in providing the data for weekly accomplishment report
d) Participate on every pre-bid meeting and bidding competition for future projects.
e)
FROM
:
August 02, 1989
TO
:
April 15, 1993
EMPLOYER/FIRM
:
Flash Builder Incorporated
POSITION HELD
:
Senior Project Coordinator
DESCRIPTION OF DUTIES:
a) Responsible for the purchasing and estimating work and to provide feedback in response to Field Engineer’s call regarding day to day problem at worksite such as materials and equipment needs
b) Provide an estimated Materials take-off on every assigned projects for procurement purposes
c) Participate on every pre-bid meeting and Bid competition for future projects
d) Undertake accurate materials take-off
e) Review and analyze all claims and change orders on project contracts
f) Providing full estimating services to ongoing projects and studies.
FROM
:
August 08, 1988
TO
:
November 27, 1988
EMPLOYER/FIRM
:
Advance Tech Construction (Mass Housing Project)
POSITION HELD
:
Project Engineer/Material Control Engineer
a) Responsible for the supervision of projects in carrying out various activities from site layout to the time of finishing the projects
b) Conduct a series of checks and inspection during construction at site
c) Prepare bar bending schedule before and during site construction
d) Support Project Control efforts on a project in the areas of budget extractions, change order estimating, and progress base generation
e) Responsible for the preparation of materials requisition based on studied construction program indicating the quantities, methods, schedule, of deliveries and their rate of use
f) Responsible for the documentation of all materials arriving at site to be in right place and in sufficient quantities
g) Provide layouts of storage areas, time and method studies of materials requirements, frequent quality and quantity checks
h) Submit daily report related to all critical materials and equipment needed at site.
12
OTHER PERSONAL IDENTIFICATION:
Philippine Professional Regulation Commission (PRC) Number
:
113411
PRC I.D. Number
:
2258809
Saudi Council of Engineers Accreditation Certificate Number
:
164983
Social Security System (SSS) I.D. Number
:
03-9078124-6
Tax Account Number (TIN)
:
130-862-829
PhilHealth Number
:
19-025114291-6
Voter’s ID Number
:
PH01-0000A-H0163RSB10000
Philippine Driver’s License Number
:
N03-95-195555
Passport Number
:
P4444713A
Issued on
:
September 20, 2017
Valid until
Issuing authority
:
:
September 19, 2022
DFA Manila
I Mr. Rolando S. Bobis, solemnly declare that the information I have given in the foregoing application is true, complete and correct and I make this solemn declaration conscientiously believing it to be true and knowing that it is of the same force and effects as if made under oath.
Rolando S. Bobis
Date: Sunday, September 01, 2019