STANLEY IHEUKO. (MIET), HND, BEng (Hons), MSc.
No.7 Oyewole close Baruwa Ipaja,
Lagos, Nigeria
+2349092464616,
[email protected]

Personal Profile:
A dedicated Marine Electrical Engineer with over 13 years of experience onboard LNG vessels with the responsible of operating, maintaining Inspections, calibration, installation, trouble-shooting, supervision of FAT testing and Hazard Identification (HAZID)coordination, Pre-commissioning, commissioning, sea trials and modification plans required for safe operations on-board LNG Vessels and marine facilities. I have also gained valuable experiences in supervising several dry/wet-dock repairs, Ship Upgrade, Conversion, and life extension for LNG vessels at shipyards in Europe ( El Ferro shipyard Spain, Navantia’s Bay of Cadiz ship yard Spain and Soberena shipyard in Brest France)

Employment History:

Nigeria LNG Ship Management Limited (NSML)
Position :- Marine Electrical and Electronic Engineer
June 2017 – Present

 Responsible for daily work planning, maintenance and installation of Electrical equipment, safety monitoring systems, navigation and bridge integrated systems on-board
 Responsible for correct and safe operation of ships power generating and power management
 Responsible for parts and stock control to ensure that all the critical parts are available at all times.
 Periodic inspection, maintenance and thermo graphic imagining of switchboards, cable terminal connections and distribution boards.
 Perform vibration condition monitoring of Electrical motors, fans, compressors using vibscanners
 Periodic inspection of EX zone equipment and installations
 Test, troubleshoot and repair refrigeration controls, compressors controls and HVAC systems, electrical submersible pumps (ESP) and electrical protection systems.
 Maintenance and weekly testing of batteries, oil mist, fire and gas detection systems
 Responsible for maintenance, testing and troubleshooting of Chloropac systems and Impressed Current Cathodic Protection (ICCP) systems
 Periodically review planned maintenance routines and carry out optimization studies within the Electrical, Instrumentation and Control discipline.
 Responsible for carrying out motor insulation resistance.
 Perform design reviews, technical reporting and supervision of shore contractors.

Shell Ship Management Limited , Isles of Man UK June.2008 – April 2011
Position: – Marine Electrical Engineer

 Troubleshooting, maintenance, repairs, and replacement of electrical equipment and systems, communication, navigation, control and instrumentation onboard LNG vessels.
 Design review of all electrical, control and instrumentation systems prior to installation on-board.
 Handles all maintenance and repair of generators, switchboards (HV & LV), controllers, and circuit breakers, electrical motors, batteries, HVAC, refrigeration plants, inert gas plant, and safety monitoring systems, distribution panels, Fresh Water Generators (FWG), alarm and lighting circuits on-board.
 Conducts & document insulation resistance measurements of electrical cables and motors and also supervises and participates in the installationand modifications of electrical systems on-board LNG vessels.
 Inventories of electrical spare parts and make necessary requisitions.
 Maintains computerized electrical system maintenance ad-hoc and updates maintenance record on the systems using AMOS and SMS.
 Preparation and inspection of electrical repairs performed by contractors during dry/wet dock, conversion and life extension projects in Spain and France.
 Performed programming, maintenance, installation and troubleshooting of PLCs, DCS, ESD, fire sensors, and all safety monitoring systems and priodic inspection of EX zone equipment and installations onboard LNG vessels.
Anglo-Eastern Ship Management Limited, Glasgow UK. Jan.2004 – June 2008
Position:- Marine Electrical Engineer
 Responsible for correct and safe operation of ships power generating and propulsion plant, including the integrated control, safety system, and fault finding.
 Spare parts and stock control to ensure that all the critical parts are available at all times.
 Periodic inspection, maintenance and thermo graphic imagining of switchboards, cable terminal connections and distribution boards.
 Perform calibration, fault tracing, repairs of sensors and field instruments.
 Periodic inspection of EX zone equipment and installations
 Test, troubleshoot and repair refrigeration controls, compressors controls and HVAC systems, electrical submersible pumps (ESP) and electrical protection systems.
 Maintenance and weekly testing of UPS, batteries, fire fighting control systems
 Responsible for maintenance, testing and troubleshooting of Chloropac systems and Impressed Current Cathodic Protection (ICCP) systems
 Periodically review planned maintenance routines and carry out optimization studies within the Electrical, Instrumentation and Control discipline.
 System integration testing, system checkouts, site acceptance testing, loop function checks, DCS/PLC configuration verification, loop tuning, boiler management systems, machine monitoring and protection systems.
 Coordinate and maintain appropriate update of Electrical maintenance and technical records including plant history using SMS (Shell management system)
Education:
1. 2013: Glasgow Caledonian University, Glasgow, UK
MSc Applied Instrumentation and Control Engineering, achieved a (DISTINCTION)
2. 2011 – 2012: Northumbria University, Newcastle upon Tyne, UK.
BEng (Hons) Electronic Design Engineering
3. 1996 – 2001: Federal Polytechnic Auchi, Edo State, Nigeria.
Higher National Diploma (HND) Electrical and Electronic Engineering.
4. Sept. 2003 – Nov. 2003: Pre Sea Training in Marine Electrical Officer Course from South Tyneside College, South Shields, UK
Training Attended:
 Feb.10th – May 11th2016 PLC, SCADA and HMI programming, configuration, installation and Maintenance, TECHCRAT INDUSTRIAL AUTOMATION AND PROCESS CONTROL LIMITED, Lagos Nigeria.
 June 15th – 17th. 2005 Control & instrumentation for LNG, South Tyneside College, UK
 June 15th – 17th. 2005 High Voltage Familiarization, South Tyneside College, UK
 Nov 3rd – 5th. 2003 Vibration monitoring, Measurement & Analysis of instrumentation, & bearing. Vibration consultancy limited, Lynne Manchester UK.
 Oct.9th 2006. Working aloft and Confined Space training- Onboard LNG Bayelsa.
 June 2017 (STCW approved) Tanker Familiarization, Elementary First Aid, Personal survival techniques, Fire prevention & Firefighting, Personal Safety & Social Responsibilities Nigeria Maritime Academy Oron, Akwa Ibom State, Nigeria.
 Jan 30th 2007 – Feb. 18th 2007 , Risk Assessment for Shipboard Operations,
Incident investigation and loss prevention including loss causation model and root cause Analysis. MARPOL ANNEX VI, ISO 14001 Environmental management, Emergency Drill at Anglo-Eastern Maritime Training Centre Mumbai, India.

PROFESSIONAL MEMBERSHIP: – IET (UK), membership No.:-1100268230
REFERENCES: – Will be provided on request.