LANGHNOJA HARDIK D

Instrumentation & Control Engineer

Permanent add: Current add : Contact No.(Work) +243 858006496

LAXMIPARA, OPP – PATEL SAMAJ JODIA, Lubumbashi, DRC Contact No: (Per.) +91 8000113556

TA:- JODIA-361250 (Africa) Date of Birth: 31st July, 1992

Dist -JAMNAGAR Email: [email protected]

State: – GUJRAT (INDIA) PASSPORT NO. IS K0902228

Objective

Seeking an opportunity for professional challenge and growth to support and enhance co-operative objectives of the company.

Professional experience: 8+ year

Qualified Diploma in Instrumentation & Control Engineering with experience of 8+ year across, instrument Maintenance & Operation, Breakdown Analysis, Troubleshooting, chemical industry project and Mining industry project. Currently spearheading as a SR. Instrumentation & control Engineer (project) With SOMIKA S.A.R.L. ( DRC, AFRICA)

Well versed in implementation of planned, preventive and predictive maintenance practices to optimize efficiency with constant endeavors to realize zero downtime and enhancing effectiveness of equipment. Proficient in conducting root cause analysis of failures and evolving quick break down solutions.

Ensuring compliance with safety requirements and standards procedure of the company. Managing the entire operations and maintenance activities with key focus on bottom line profitability & optimal utilization of resources.

Focused and hardworking professional equipped with thorough knowledge and technical understanding coupled with an analytic bent of mind and confident to take challenging assignments.

EDUCATIONAL CREDENTIALS

Diploma in Instrumentation & Control Engineering, (Pass out-2010)

A.V.P.T.I. Polytechnic, Rajkot, Gujrat, India

Technical examination board (Gujarat)

Industrial Automation professional course

Neo creative vision Technologies private limited ( June-2010 to Dec-2010)

X standard, (Passout-2007)

Shri Sheth K.D.V. High School, Jodia

PROFESSIONAL EXPERIENCE

SOMIKA S.A.R.L. (DRC, AFRICA) Since on May-2018

SR. Instrumentation & Control Engineer

Working as a SR. Instrumentation & Control engineer at SOMIKA SARL.

Prepare and checking Instrument designing document like, instrument index, I/O schedule, cable schedule, instrument data sheets, loop diagrams, cause and effect diagram, instrument hook up drawing, air header schedule, instrument location drawing, cable tray layout, wiring drawings, Erection ,Commissioning and Testing document of Field Instruments ,Control panel, Automation Panel and pneumatic panel. All document prepare in AUTOCAD – V18 software.

Prepare and checking as per ISO standard symbolize P&ID, PFD, PLC SCADA system architecture and control room layout plan.

Checking vendor package instrument & panel drawing like, control panel wiring diagram, panel GA drawing, control panel BOM, instrument drawing etc.

Checking instrument technical offers as per instrument data sheet. Technically comments given to respective procurement person.

Making instrument & instrument hardware purchase request as per project requirement in FEEBO system.

Planning & execution Copper & Cobalt project works.

Prepare instrument related spare material management for maintenance work.

CHEMAF S.A.R.L. (DRC, AFRICA) Feb-2016 TO April-2018

Instrumentation Engineer

Worked as an Engineer Instrumentation at CHEMAF SARL for theirs going on projects.

Project & success fully commissioning crushing milling, leaching, thickeners, Pin bed clarified, dual media filter, Solvent extraction and Electro winning facilities. The plant is fully automated with Siemens S7 400 series PLC with PCS 7. leach plant using a Siemens PCS 7 with Fiber optic Loops with Profibus DP Remote IO system with web hosting facility.

Worked on Siemens PCS 7 & Simatic Manager like Configuration, upgrade the logic implementation, engineering application, and programming software to hardware level.

Making new logic, modify logic of motor/pumps logic and interlock system up to DCS.

As per P&ID graphics making on Simatic wincc , Siemens HMI .

Programming on smart MCC in Simocode and Soft Starter with Profibus communication.

Preventive maintenance, Troubleshooting, Calibration, configuration & installation & of field instruments.

SRF LIMITED Nov-2013 TO Feb-2016 JR. Instrumentation engineer

Worked as a junior Engineer Instrumentation at SRF Limited

Project & Commissioning of specialty chemical plant using a Delta V DCS with both Foundation Field bus and HART protocol. Delta V DCS like Configuration, upgrade the logic implementation, engineering application, and programming. Emerson DCS DELTA V software to hardware level.

Hands on experience of Smart MCC with profibus Communication in DELTA V DCS & PCS 7 DCS. Wireless Instruments Make: Rosemount. Gateway Communication Modbus.

Have ability to read P&I Diagram, Functional logic diagram, Loop Diagram, and Ladder Diagram.

Configuration & Commissioning of Foundation field bus instruments in DCS (Delta V-Emerson)

Loop checks for field instruments, motor/pumps logic up to DCS.

Hofi. Info. & Indus. Services Pvt Ltd Jan-2011 to Nov-2013

Instrumentation Engineer

Calibration, configuration, installation & maintenance of Electronic smart transmitters for

Measurement of Pressure, Flow, Level & Temp. of different make- Foxboro, Rosemount And E&H.

maintenance & calibration of various types of switches like- Pressure, Flow, Level & Temperature of different make-Ashcroft, UE, delta controls, switzer, magnetrol, ABB, krohne

Calibration and servicing of Self-Operated Valves, and Solenoid Operated Valves, Double acting. Performs calibration of process instrumentation such as Temperature Indicating Controllers, Temperatures Indicators, Pressure Indicators and Thermo-Couples and RTD PT100 etc.

Calibration, servicing of Control Valves of different types and makes (Fisher, ABB,) Calibration smart positioner make Siemens.

Gas Compressor’s Bentley Nevada 3300 System Proximity Probe calibration (Vibration, Axial) and check Monitor and Tachometer System Use with Tabulator TK-3.

During Maintenance Activity

Planning instrumentation Preventive maintenance, corrective maintenance and break down maintenance. Direct dialing with vendor as per any modification or any changing require in process and system develop as soon as possible.

Doing Material Procurement, Material indents per department requirement.

Ensure that inspection and testing activities are planned and carried out as per planning and follow up if other department action will require.

During instrument Project Activities

Involve In FAT process for DCS system (check hardware, software, redundancy, logic, interlock, graphics and loop check).

Material inspection as per purchase order.

Review the daily/ weekly/monthly documentation, like manpower, progress, erection, calibration, testing and commissioning reports.

To prepare instrument calibration report, loop checking report, hydraulic test report, reconciliation report and break-up document of measurement sheet for instrument.

Manpower calculation for the manpower requirement and job all Location.

During Pre-commissioning activity

To follow commissioning standard documents (pre startup safety review)

To prepare all instrument check list report

Using P& ID drawing check instrument proper mounted

Using HOOK-UP drawing check all pneumatic connection

Using panel termination detail check all termination

Check all ferrule and lug as per standard document

Check all instrument and record proper approach for maintenance job

Loop check and all instrument monsoon protection

Software & computer activity

DCS- Siemens PCS 7 with CPU 417 for Process Plant. PLC- Siemens S7 300 programming on Simatic manager for Ball Mill. SCADA system Graphics design on Simatic Wincc Explorer.TIA Portal V13 & V15 HMI design with S7-1200 & 1500 PLC.

DELTA V DCS at CHEMICAL PLANT.

AutoCAD V18 basic level.

Simocode programing using Simocode ES software.

Microsoft office, word & MS project.

Declaration

I hereby declare that the information furnished above is true to the best of my knowledge.

Thanking you,                                        Langhnoja hardik d.