MUHAMMADUSAMAAMJAD

Mechanical Engineer Abu Dhabi, United Arab Emirates Cell (UAE): +971-54-4008602 Cell (Pak): +92-331-4807949 Email: [email protected] UAE Driving License # 2246816

OBJECTIVE

A challenging and rewarding career where teamwork, enthusiasm, initiative and hardworking will lead to increasing responsibilities and to communicate my technical/practical knowledge and expertise to new generation of engineers for their active contribution in development of engineering industry.

PROFILE

8 years of acute techno-commercial acumen developed, in a well-known company by accepting challenging assignments in:

PROJECTEXPERIENCE

1) Erection& Commissioning of 300 T/D Dolomite Production Plant March 2014 to May 2015 Worked on Erection & Commissioning of Dolomite Production Plant which includes entire Mechanical Work

2) Quick Lime Plant Storage Section Successfully completed the project of storage section of Quick Lime plant with capacity of 300T/D. Installed and commissioned all the Mechanical Equipments.

3) DoloLime Plant Storage Section Successfully completed the project of storage section of Dolomite plant with capacity of 300 T/D.

4) Boiler having steam Capacity 20T/H Successfully completed the Installation and commissioning of Saturated Steam Boiler.

5) Lime Plant. (Maerz RCE Shaft Kiln) 200T/D Successfully completed the Installation and commissioning of Lime Plant.

6) Industrial Dryer Kalar Kahar Cement Designed and fabricated a dryer for the drying of municipal waste which is after drying used as fuel in burning.

EMPLOYMENT HISTORY

Company: Designation: Location: Duration:

Company: Designation: Location: Duration:

Company: Designation: Location: Duration:

AL Jazeera Emirates Group Senior Mechanical Engineer Abu Dhabi, UAE June 2014 – To Date

D.G Khan Cement Company Limited

Assistant Manager Mechanical KalarKahar, Pakistan June 2012 – MAY 2014

Ravi Autos Operations Engineer

Lahore, Pakistan April 2011 to-May 2012

1 KEY RESPONSIBILITIES:

SAFETY

• Designed and conducted safety training sessions for all employees to enhance their ability to recognize and avoid or

• eliminate potential workplace hazards.

• Performed internal audits to find areas with a higher-than-acceptable potential for injury.

• Performed weekly walk-through for safety inspections of the facilities.

• Ensure the use of PPEs at work place.

MAINTENANCE ACTIVITIES

• Maintenance of Turbine (General Electric 10MW horizontally split back pressure, Refurbished by RMS)

• Performed disassembly and assembly of turbine to refurbish rotor shaft at damaged area along with experts from

• Rotating Machinery Service &Macek Power USA.

• Replaced the bearings of turbine.

• Maintenance of Pumps (Flowserve Pumps WXB and WUC )

• Replaced the bearings of these pumps.

• Replaced the Mechanical Seals of Pumps.

• Preventive Maintenance of Compressors (Ingersol Rand DN 251N-A 255 & Atlas Copco GA200W 470)

• Maintenance of GrundFos Multistage Centrifugal Pumps.

• Maintenance of Goulds Pumps (Centrifugal Pump LF 3700 SA)

• Preventive Maintenance of Wartsila Engines (2 Engines, 18V 52 DF 16.5 MW each)

• Preventive & Predictive Maintenance of Cummins Engine (KTA-50 G3 1000KW)

• Replaced bearings for ATOX 52.5 Raw mill along with FL Smidth inspector.

PREPARATION/PLANNING ACTIVITIES

• Review & monitor corrective action and modification / update drawings to ensure improvement in the performance of machine and equipment and follow up / study of failure to avoid re-occurrence of failure & improve reliability.

• Preventive & predictive maintenance plans to minimize the breakdown of machine & maximize the availability of equipment at efficient level by using Enterprise Asset Management “eAM” program (Oracle ERP) & X-PLAIN–II a soft ware of computerized management system of systematic maintenance (FLS).

• Preparation, planning & execution of shut down activities & to keep machine history in ERP system for analysis of machine condition

• Maintaining & requisitioning stocks of consumable spare parts using ERP system in store

• To keep close liaison with Audit of ISO 9001 & 14001 by managing document & record to achieve the requirement of clauses of Quality & Environmental management program & to ensure compliance to all relevant safety, quality & environmental management policies, procedures & controls across the electrical & instrumentation section

• Productivity Analysis & Improvements in the manufacturing departments.

• Assure that manufacturing of products is according to standards.

• Prepare costing data sheet for the development of new component and comparison of calculated with actual costing data sheet.

2 WORKSHOP/TRAININGS

• Training on 5S, Continuous Improvement at PAPAAM Center Lahore by PSMCL.

• Participated in Workshops Regarding Non Destructive Testing, Entrepreneurship, HVAC, and Quality Assurance in

• Manufacturing Sector.

• Participated in one day course on “Supply Chain management for Manufacturing Sector”

• Attended a two days workshop on “Effective Interpersonal Skills” held in Lahore.

ROFESSIONAL COURSES &AFFILIATIONS

• The American Society of Mechanical Engineers(ASME)

• The International Society of Automation(ISA)

• Project coordination and training for new projects in Haier.

• Two weeks Kaizen (ANY SMALL CHANGE FOR THE BETTERMENT) Training from HNR Company Pvt.

(Ltd.)

• PITAC(CNC Milling and CNC Turning centre course with 3D CAD/CAM using Power mill)

• PEC(Have done short course on Project Planning and Scheduling using Primavera P6)

• DESIGN SOFTWARE TRAININGS(Give professional trainings on PRO E, Auto Cad, Power Mill and Solid Works in

• Reference of Ravi Autos)

• PAPAAM Center Lahore Pakistan (SIX SIGMA training by PSMCL at. April 2013)

SOFTWARESKILLS

• AUTOCAD (Proficient in ( 3-D and 2-D Modeling)

• ANSYS12.0

• TRANSYS

• SOLID WORKS(Proficient in (Part Modeling, Assembly module, Drawing Module, Simulation)

• Pro-EWildfire4.0 and 5.0(Proficient in (Part Modeling, Assembly module, Drawing Module, Simulation, Manufacturing

• Module, Sheet metal module)

• FAST BLANK

• CAM SOFTWARES(Proficient in Power Mill and Master Cam short course)

• PRIMAVERA P6

• Maintenance Management software: ERP, EAM

• Non-destructive tests (NDT) methods

AWARDS &ACHIEVMENTS

• Member organizing team of UET Lahore’s mega events of Technofest’12 and REECE’12

• Awarded an acknowledgment shield by the ASME,JZT, (UET Chapters)

• Chief Organizer of Student Speed Design Contest(SSDC) and Event organizer at ASMEUET CHAPTER

• ExecutiveofLiterary&DebatingSociety(LDS)&cultural,dramatics&entertainmentsociety(CDES)at university

• Fashion Icon of CDES cultural dramatics and entertainment society

• Vice President of Student Support Society (RSSS)

• Receiving Chief Minister Internal Merit Scholarship from 4 years on best academic Record

• Winner of kangro test (School of Mathematician GCU Lahore)

• Got honor certificate from DEAN of UET Lahore in 1st and 2nd semester for achieving 3.7 GPA

3 DESIGN EXPERTIES

• Reverse Engineering of products

• Develop 2D & 3D drawings of automotive parts

• Implementation of ISO drawings

• To prepare, implement and follow up the development plan for newly developed components and to keep record the minutes of all development review meetings.

• Design development and diagnosis of the functional problems in the products.

• Productivity Analysis & improvements in the manufacturing departments.

• Managed the Development of parts at customer premises and got the job done to meet the production deadlines.

• Strong command on Designing software’s i.e. PRO E , Auto Cad ( 2D and 3D ), Solid Works, Del Cam etc.

• Design development and diagnosis of the functional problems in the products.

MECHANICAL MAINTENANCEEXPERTIES

• Working on Compressors, Pumps, Control Valves, piping, Engines (Wartsila,CAT, Perkins) .

• Excellent understanding of DRAWINGS (Isometric, P & I).

• Welding, Welding Types, project planning & scheduling, Workshop Machining.

• Facility Layouts, Activity, Productivity Analysis & Measurement Tools, ISO Standards.

• Production & Operation Management, Product development, Lean management, Business/client relationship management, Contract management, Technical sales, Vendor development & complaint management.

• Development of New Parts and also used Reverse Engineering Technique.

• Comprehensive work in field of Quality Assurance.

• Leading teams, performance management, coaching & mentoring.

ACADEMIC QUALIFICATIONS

Bachelor of Science in Mechanical Engineering University of Engineering & Technology; Lahore, Pakistan

Intermediate (Pre-Engineering) Punjab College of science, Lahore, Pakistan

Matriculation (Science) Laurel Bank Public school, Lahore, Pakistan

PERSONAL DETAILS

2008 – 2012

2006 – 2008

2004 – 2006

3.386/4.0

889/1100

878/1050

• Father’s Name Syed Amjad Irfan

• Date of Birth: Jul 22,1989

• Gender: Male

• Marital Status: Married

• Nationality: Pakistani

• Languages: Fluent in English, Urdu and Punjabi.

• UAE Driving LicenseYes (2246816)

REFERENCE

Fakhar Abbas Manager Electrical and Instrumentation in Al Jazeera Emirates Group Abu Dhabi, United Arab Emirates Cell# (PAK): +92-345-5441081 (UAE): +971-52-6362200 Email: [email protected]