Photo

Bayani Valdez Electrical Maintenance

Philippines
Lineman

Bayani Valdez

Objective:

To offer my career as JOURNEYMAN ELECTRICIAN and my all-encompassing Knowledge and Experienced effectively utilize in any Electrical projects.

Summary

​14 years experienced As an ELECTRICIAN had long track of accomplishments, performs Low voltage electrician and High Voltage Electrician. With substantial knowledge and experienced in electrical construction, installation, Repair and operation maintenance. Had been assigned in multiple U.S Bases at Iraq and Afghanistan in power generation plant projects.

Qualification

  •   Self-Motivated with a good ethic and possess written and verbal communication skills.
  •   Capable of handling complex situation and numerous responsibilities.
  •   Ability to read and understand electrical schematics, diagrams and blue prints
  •   Competent in any Tools, vehicle and equipment utilize in electrical construction and maintenance
  •   Strong commitment to work place safe and organized work environment, a keen attention to detail and ability to prioritize and organize work
  •   13 years of Experience Electrician and willing to work in austere environment

Employment History

Exp Federal – Bagram Airfield

Master Electrician – December 2018 present

  •   Performs Inspection, Assessment, updates and repair of electrical low voltage problems including Generators, Transfer switch, MDP, SDP and CDP in compliance with National Electric Code
  •  Perform Job Hazard Analysis (JHA) and lock-out/tag-out procedures
  •  Grounding/bonding and identifying, removing, and/or mitigating Objectionable Ground Current (OGC).
  •   Install maintain modify and repair all electrical distribution systems and associated electrical equipment
  •   Perform effective troubleshooting to identify hazards or malfunctions and repair or substitute damaged units

Louis Berger Group – Bagram Airfield, Afghanistan

High Voltage Electrician- November 2016 – August 2018

 

  •   Performs High Voltage Electrician at 13.8 kV and 4.16 kV distribution overhead and underground, assigned in installation, repair, upgrading system, operation and maintenance.
  •   Maintain 650 units of Transformer with different voltages, 7 units of distribution transformer from 13.8 kV to 4.16 kV and Substation with 18 units of PSC and 12 units Sectionalizing load break box executes maintenance, Inspection, Test, Reading Voltage and load for monthly report
  •   Respond in power outages and conduct scrutiny causes of faults and repair in orderly and safe manner.
  •   Performs in maintenance of Street lights, Area lights and Perimeter lights and Solar Light sets for pathway, conduct weekly routine checks account for busted bulb, faulty photo cell and malfunction lights controller and batteries report to supervisor and fix immediately.
  •   Respond on the request of other contractor for monthly test run of backup generators ensures FMC in the event of power outages.
  •   Perform HOT LINE work in overhead lines to install additional equipment or repair damage equipment with safety measure
  •   Observes and follows all safety rules and procedure of the company.

IAP Worldwide Services – Iraq and Afghanistan

High Voltage Technician

Perform Low Voltage Electrician

  •   Commercial or residential Building Wiring do installation, repair, operation & maintenance.
  •   Calculating load require for the building and do a Planning for Installation of an Electrical Main Distribution Panels, Sub-Distribution Panels, Controllers, Switchboard and Circuit Breaker
  •   Performs installation of manual transfer switch or automatic transfer switch between generator and prime power
  •   Performs lay outing PVC or CONDUIT PIPES and carry out BENDING and PULLING WIRES and wire Termination.
  •   Performs Installation such as: Lighting Fixture, Socket Outlet and Special load. Set up light switch, such as Single Switch, Three-way Switch or Four-way Switch.
  •   Read and interpret Wiring Diagram, blueprint, schematic diagram and other technical specifications
  •  Undertake Troubleshoot and repair to an electrical Faults. Knowledgeable in using and reading of multi-meter tester, clamp meter, and phase sequence indicator.
  •   Performs Test and Commissioning and Performs Other Duties and activities as directed

Perform High Voltage Electrician Underground Distribution

  •   Cable Jointer HV/MV Cable Performs Termination and Splicing of EPR, XLPE and ensure after termination and splicing conduct a cable test using Megger or DC HI-POT
  •  Performs electrical installation, testing, troubleshooting and repair such as generators, switchgear, substation, primary switching center (PSC) secondary distribution center (SDC), sectionalize box and transformers oil type or dry type.
  •   Performs pulling underground cable and apply termination either dead break or load break indoor or outdoor.
  •   Perform test and commissioning of Power Generation Plant and execute PLANT OPERATION
  •   Performs monthly Inspection and preventive maintenance of electrical equipment Such as: Switchgear, Sub-Station, Generators, PSC, SDC, Transformers and overhead line
  •   Performs trenching for underground line and Using and Operating Backhoe, ditch witch trencher and cable pulling Equipment.
  •   Follows all safety rules and LOCK-OUT TAG-OUT PROCEDURES, including wearing required PERSONAL PROTECTIVE EQUIPMENT.

Perform (Lineman) Overhead Distribution

  •  Performs electrical construction installation of poles, cross arm, brackets, insulators, guy wire, conduits for raiser, pothead, fuse cut-out switch, pole line switch, air switch, arrester, dead-end shoe clamp and dead-end insulators
  •  Performs operating of tension stringing equipment (TSE) cable drum puller and cable tensioner to pull and sag of overhead wire (ACSR)
  •   Performs operating Lineman Truck, Bucket Truck, JLG lift, Bobcat, JCB backhoe and loader and other heavy equipment vehicle.
  •  Performs using electrical instrument such as Transformer turn ratio TTR, Load Looker Ammeter, Voltage Detector and CABLE LOCATOR for underground line
  •   Performs on call duty and Respond in power outages and identify causes of faults in the systems and repair.
  •   Respond on costumer call to resolve their complaint and issues
  •   Perform switching energize or de-energized line using protective equipment and apply logout tag out

Prime Projects International – IRAQ 2004-2005

Position: Foreman Construction

Duties:  Assigned in construction of power plant subcontracted from IAP Company. Supervised and perform setting up power generation plant, Switchgear, RMU, transformers and other electrical equipment. Implemented cable pulling and cable termination. Performed Trenching and back filling for underground cable.

Prime Projects International – DUBAI U.A.E 2003-2004

Position: Welder/Fabricator Foreman 2003-2004 Dubai

Duties:  Assigned in warehouse and fabrication, modification of 20 ft. or 40 ft. container converting into container housing unit. Supervised on a daily routine assignment of personnel and making daily progress report and Estimating, Ordering, receiving materials needed for the projects

Tee Chang Construction Co. Ltd – TAIWAN 1996-1998

Position: Labor / Fabricator

Duties: Assigned in metal Fabrication plant, Main projects of Steel bridges and structural building. Performed measuring, assemble and weld tacking of a framework, performs grinder operator, Drill Machine operator, punching holes Machine operator, and assist fellow Fabricator as needed, and assist electrician as needed and ensure the work place always well-ordered and clean before leave.

 

Gozon Trading and Welding Shop – Philippines 1989-1996

 

Position: Welder/Fabricator all Around Job First employment after graduated and Started as salesman and bicycle mechanic at Main Business then transferred at the other branch welding shop located at San Andres, Manila. And assigned as fabricator/Welder. Performs a multiplicity job include measuring, cutting and bending of pipes, flat bars, square bars, round bars etc. know how to use gas torch for cutting and welding machine, and competent in any kind of power tools and manual tools. Capable assembling and welding sidecars. Performs Ironworks and fabricate, weld such as steel gate, steel window grills, steel fence and other welding repair job.

 

Education

VOCATIONAL: Master Electrician 2008-2009

MFI TECHNOLOGICAL INSTITUTE – PASIG CITY, PHILIPPINES

TERTIARY: Technical Education 1987-1989

NUEVA ECIJA UNIVERISTY of SCIENCE and TECHNOLOGY (Formerly CLPC) -CABANATUANN CITY

Major: Automotive

SECONDARY 1983-1987

PALAYAN CITY COMMUNITY SCHOOL – PALAYAN CITY

PRIMARY 1977-1983

MARCOS VILLAGE ELEMENTARY SCHOOL – PALAYAN CITY

 

Certificate and Training

National Certificate II / Certificate of Competency (TESDA NCII/COC)

Building Wiring Installation and Maintenance (MFI Technological Institute)

Industrial Electrician (MFI Technological Institute)

Advance Industrial Electrician (MFI Technological)

Electrical Control Wiring Installation and Troubleshooting (MFI Technological Institute)

Auto Electrician Course (MFI technological Institute)

AutoCADD Course (MFI Technological Institute)

 

Training / Seminar

  •   2016 Red Cross Training CPR and AED conducted by Louis Berger JV
  •   2013 IAP Company EMERGENCY RESPONSE TRAINING Emergency Care & safety institute: Standard first aid course including CPR & AED for Adult,

 

Reference:

Kenneth Cotton Exp Federal Project Manager

ELLERY CRAFT Theater Manager Louis Berger Afghanistan

ABEL OTEINO IAPWS Former Manager Camp Marmal Afghanistan

MARK STROH IAPWS Middle East Theater Manager