Education

June 2000 - April 2004 Bachelor of Mechanical Engineering Technology at Batangas State University

Experience

March 28 2017 – June 12, 2019 Mechanical Millwright / Fitter at FQM CONSTRUCCION Y DESAROLLO, S.A…

Duties and Responsibilities
• Assemble of Primary Crushers (ThyssenKrupp) and Secondary Crushers (Metso).
• Installation, maintenance and repair of machine and machine components.
• Can read and interpret ISO drawings.
• Layout and alignment of machine/equipment, pump and motors, conduct duties/activities for daily productions.
• Testing machine and troubleshooting in case of problems.
• Assembling machines.
• Getting involved in the machine building process from the blueprint stage and planning the process of the project.
• Maintenance of the equipment required for installation and repair of machines.
• Align, fit, and assemble components parts, using available hand tools, power tools, fixtures and templates.
• Diagnose malfunctioning systems, apparatus, and components, using test equipment ad hand tools to locate the cause of a breakdown and correct the problem.
• Inspect electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system.
• Repair, rework, and calibrate hydraulic and pneumatic assemblies and systems to meet operational specifications and tolerances.
• Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.
• Test performance of electrical and electromechanical assemblies, using test instruments such as oscilloscope, electronic/magnetic form.
• Provide preliminary sketches and cost estimates for materials and services

September 08, 2016 – October 26, 2016 Mechanical Millwright / Fitter at Group Five International Limited

Duties and Responsibilities
• Replace defective parts of machine or adjust clearances and alignment of moving parts.
• Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
• Connect power unit to machines or steam piping equipment, and test unit to evaluate its mechanical operation.
• Repair and lubricate machine and equipment.
• Assemble and initial equipment, using hand tools and power tools.
• Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings to determine work procedures.
• Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
• Insert shims, adjust tension on nuts and bolts or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
• Move machine and equipment, using hoists, dollies, rollers, and trucks.
• Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
• Lay out mounting holes, using measuring instruments, and drill holes with power drill.
• Bolts parts, such as side and desk plates, jaw plates, and journals, to basic assembly unit.
• Level bedplate and establish centerline, using straightedge, level, and transit.
• Dismantle machines, using hammers, wrenches, crowbars and other hand tools.
• Shrink-fit bushings, sleeves, rings, liner, gears, and wheels to specified items using portable gas heating equipment.
• Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team.
• Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
• Install robot and modify its program using teach pendant.
• Operate engine lathe to grind, file and turn machine parts to dimensional specifications.

July 27, 2014 – April 15, 2016 Mechanical Millwright / Fitter at First Quantum Minerals Ltd.

Duties and Responsibilities
• Assemble of Primary Crushers (ThyssenKrupp) and Secondary Crushers (Metso).
• Installation, maintenance and repair of machine and machine components.
• Can read and interpret ISO drawings.
• Layout and alignment of machine/equipment, pump and motors, conduct duties/activities for daily productions.
• Testing machine and troubleshooting in case of problems.
• Assembling machines.
• Getting involved in the machine building process from the blueprint stage and planning the process of the project.
• Maintenance of the equipment required for installation and repair of machines.
• Align, fit, and assemble components parts, using available hand tools, power tools, fixtures and templates.
• Diagnose malfunctioning systems, apparatus, and components, using test equipment ad hand tools to locate the cause of a breakdown and correct the problem.
• Inspect electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system.
• Repair, rework, and calibrate hydraulic and pneumatic assemblies and systems to meet operational specifications and tolerances.
• Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.
• Test performance of electrical and electromechanical assemblies, using test instruments such as oscilloscope, electronic/magnetic form.
• Provide preliminary sketches and cost estimates for materials and services.

July 15, 2013 – May 26, 2014 Mechanical Foreman at Becthel (LNG) Oil & Gas

Duties and Responsibilities
• Leads and control skilled labor and work crews engaged in all activities concerned with the mechanical works aspects of the projects. Ability to optimize resources (manpower, equipment, and materials) to ensure efficient and timely completion of the works. Able to demonstrate good organizational skills, following policies, procedures and work practices, and developing improvements where necessary.
• Ability to read, interpret and follow method statement and procedures. Competent in reading and understanding specifications, drawings, and all other discipline related project and engineering documentation. Keeps records of all work completed and completion of action lists.
• Commands respect of his workforce, and develops excellent working relationships with all other department personnel as well as client management
• Must be a good communicator. Able to give instructions in an efficient and effective way to his workforce. Liaises with other discipline foreman to ensure the optimum utilization of available work, with the overall objective of successful completion of the project.
• Ensures that installations are made in accordance with manufacturer’s specifications, work drawings, blueprints and other contractual requirements.
• Supervises the installation of pipe works for fuel, lubrication and coolant system, air conditioning ductwork as well as all plumbing works.
• Supervises workers in testing completed assemblies, to ensure optimum and safe operations. Supervises in the preparation of all mechanical systems for commissioning.
• Supervises and coordinates workers engaged in the installation of diesel engine generator units and ancillary equipment. This included all mechanical aspects of the setting up, including bedding down of the engines, installing and connecting fuel, coolant and lubrication system, mechanical controls, air conditioning ducting, fuel and coolant storage tanks, etc.
• Familiar with all Company Safety and QA/QC procedures and strictly enforces them amongst the workforce.

February 16, 2011 – May 15, 2013 Mechanical Maintenance Technician at T. Nagadi Preformed Concrete Factory

Duties and Responsibilities
• Installation, maintenance and repair of machine and machine components.
• Can read and interpret ISO drawings.
• Layout and alignment of machine/equipment, pump and motors, conduct duties/activities for daily productions.
• Testing machine and troubleshooting in case of problems.
• Assembling machines.
• Getting involved in the machine building process from the blueprint stage and planning the process of the project.
• Maintenance of the equipment required for installation and repair of machines.
• Align, fit, and assemble components parts, using available hand tools, power tools, fixtures and templates.
• Diagnose malfunctioning systems, apparatus, and components, using test equipment ad hand tools to locate the cause of a breakdown and correct the problem.
• Inspect electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system.
• Repair, rework, and calibrate hydraulic and pneumatic assemblies and systems to meet operational specifications and tolerances.
• Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.
• Test performance of electrical and electromechanical assemblies, using test instruments such as oscilloscope, electronic/magnetic form.
• Provide preliminary sketches and cost estimates for materials and services.

March 13, 2006 –February 3, 2011 Manufacturing Technician at Toshiba Information Equipment (Phils.) Inc.

Duties and Responsibilities
• Provides immediate support on model set-up involving electro-mechanical fixture and related structures.
• Helps in maintaining functionality of line equipment and tools to ensure continuous production run.
• On time diagnosis of defective machine/tools.
• Provides feedback details involving initial causes of trouble and possible countermeasures to be implemented in order to reduce or illuminate re-occurrence.
• Ensure that proper handling of materials and parts being replaced and observed.
• Controls the usage and transfer of spare parts and generates corrective measure and defective ones.
• Maintain documents files or records of repair history of equipment/tools and check sheets for easy retrieval.
• Maintains master list for all jigs and fixtures for control purposes.
• Generates repair history files for future repair references.
• Direct the operation of all production elements through real time monitoring in order to attain projected target.
• Minimize production line stop and supports in the maintenance of jigs and tools.
• Conduct daily production and quality meeting.
• Utilize all resources and monitoring line condition in order to have a smooth flow of production and achieve daily targets.
• Maximizes operation hours and makes recovery plans for negative variances.
• Inspect consistently the assigned work area in order to ensure the line’s compliance to the set 5’s and safety standard of the company.
• Observe company standard on safety and other operational elements.
• Gives training to operators and provides technical support to engineers and manufacturing personnel on machine use and monitors safety provisions of machines used in operations.

February 03, 2005 – October 14, 2005 Plant Technician/Operator at Sakamoto Orient Chemical Corp.

Duties and Responsibilities
• Provides immediate support on model set-up involving electro-mechanical fixture and related structures.
• Helps in maintaining functionality of line equipment and tools to ensure continuous production run.
• On time diagnosis of defective machine/tools.
• Provides feedback details involving initial causes of trouble and possible countermeasures to be implemented in order to reduce or illuminate re-occurrence.
• Ensure that proper handling of materials and parts being replaced and observed.
• Controls the usage and transfer of spare parts and generates corrective measure and defective ones.
• Maintain documents files or records of repair history of equipment/tools and check sheets for easy retrieval.
• Maintains master list for all jigs and fixtures for control purposes.
• Generates repair history files for future repair references.
• Direct the operation of all production elements through real time monitoring in order to attain projected target.
• Minimize production line stop and supports in the maintenance of jigs and tools.
• Conduct daily production and quality meeting.
• Utilize all resources and monitoring line condition in order to have a smooth flow of production and achieve daily targets.
• Maximizes operation hours and makes recovery plans for negative variances.
• Inspect consistently the assigned work area in order to ensure the line’s compliance to the set 5’s and safety standard of the company.
• Observe company standard on safety and other operational elements.
• Gives training to operators and provides technical support to engineers and manufacturing personnel on machine use and monitors safety provisions of machines used in operations.

November 02, 2004 – January 31, 2005 Assistant Operator and Warehouse Personnel at Beezy Seven, Inc.

Duties and Responsibilities
• Maintain documents files or records of repair history of equipment/tools and check sheets for easy retrieval.
• Maintains master list for all jigs and fixtures for control purposes.
• Generates repair history files for future repair references.
• Direct the operation of all production elements through real time monitoring in order to attain projected target
• Minimize production line stop and supports in the maintenance of jigs and tools.
• Conduct daily production and quality meeting
• Initiates and leads process study and coordinates with superiors regarding the improvement actions in assigned area.
• Conducts multi-skills training for operators and implement standard motion for each line to increase productivity.
• Trains and develops personnel in order to achieve high level of performance and improve working relations.
• Conducts timely and periodic learning’s sessions to improve overall performance of his life.
• Inspect consistently the assigned work area in order to ensure the line’s compliance to the set 5’s and safety standard of the company.
• Observe company standard on safety and other operational elements.
• Gives training to operators and provides technical support to engineers and manufacturing personnel on machine use and monitors safety provisions of machines used in operations.