CURRICULUM VITAE
NORMAN M. DUHAYLONGSOD
QA/QC MECHANICAL ENGINEER
Philippines, Born on 28 March 1966, Age 54 years old

Educational Qualification : Bachelor of Science in Mechanical Engineering
Date Graduated : October 1993
Cebu Institute of Technology University
Cebu City, Philippines
License Board Exam : Mechanical Engineer Board
June 16, 1998

Post Graduate : Certificate Of Governmental Management
Master of Public Management ( 27 Units)
Date Graduate : March 2000
Negros Oriental State University
Negros Oriental, Philippines

Diploma : Automotive Engineering Technology
Date Graduate : March 1987
Iligan Institute Of Technology- Mindanao State University
Iligan City, Lanao Del Norte, Philippines

Government Exam : National Police Commission ( NAPOLCOM )
Date Of Exam : September, 1989
University Of Cebu
Cebu City , Philippines

Trainings, Courses & Seminars :

• Certificate of Pneumatic and Hydraulics ( 45 hrs)
Don Bosco Technical and Vocational School
Cebu City, Philippines
• Certificate of General Mechanic / Motor pool ( 800 hrs )
Iligan Cement Corporation
Kiwalan, Iligan City, Philippines
• Work Permit Receiver and Facility Safety ( Jeddah Oil Refinery )
Orientation ( Loss Prevention Department Saudi Aramco Jeddah Refinery Department )
• PLUMBING – ( Water Distribution System and DWV, Sanitary System ) – PSME seminar
• HVAC – ( Calculation and Designed ) – PSME seminar
• Project Management Professional Seminar – PSME seminar
• Fire Protection Designed – PSME seminar

Computer Skills : MS Office ( Word, Excel)

Professional Skills : QC Inspection Mechanical (Piping, Plumbing, Equipment and HVAC) construction
Quality Control works for Infrastructure, Industrial Buildings and Oil Refinery /
Petro Chemical project.

Years of Experience : 14 years

WORKING EXPERIENCE:

Feb. 2013 – Present: Nesma & Partners Cont. Co. Ltd.,
Al Khobar, K.S.A.
Project:

Client:
Position: GOSP-3, HAWIHAY
(Nov. 2019 – At present)
Saudi Aramco
Trainee; Procurement QC Supervisor ( PQCS )
Project:

Client:
Position: GOSP-3, HAWIHAY
(April. 2019 – Oct. 2019)
Saudi Aramco
QA/QC Engineer Mechanical
Project:

Client:
Position: 4IRC- Industrial Revolution Center, Midra Tower, KSA
(Jan. 2019 – March. 2019)
Saudi Aramco
QA/QC Mechanical Engineer
Project:

Client:
Position: JUBAIL BULK PLANT
(Jul. 2018 – Dec. 2018)
Saudi Aramco
QA/QC Mechanical Engineer
Project:

Client:
Position: OMPP SA 2 Harad Project
(Feb. 2018 – June 2018)
Saudi Aramco
QC Piping
Project:

Client:
Position: DIRAB AIR BASE RIYADH
(Oct. 2016 – Jan. 2018)
MINISTRY OF DEFENSE SAUDI ARABIA
QA/QC Mechanical Engineer
Project:

Client:
Position: KAUST TOWN CENTER BUILDING UPGRADE
(April 2014 – Sep. 2016)
Saudi Aramco
QC Plumbing
Project:

Client:
Position: STP ,Thuwal Development
(Feb. 2014 – April 2014)
Saudi Aramco
QC HVAC
Project:

Client:
Position: PCC Nylon 6.6 and Petrochemical Conversion Project.
(Feb. 2013 – Feb. 2014)
Chevron Philips / Jecob Zate
QC Mechanical / Piping
Overall Responsibilities : Quality as per Project Standard required and procedure. As per Aramco Standard SATIP-L-450-01, SATIP-L-350-02, SATIP-A-004-01, SATIP-A-004-02, SATIP-A-004-03,SATR-A-2001, SATR-A-2001-V,SATR-A2008, The SAIC as per the requirement of site activities of SATIP and Site Inspection. As the required standard International Aramco Standard, SAES, SAEP, ASME B31.1, ASME,B31.3, ASME B31.4, SAES-A-004, SAES-A-007. As per Duties and Responsibilities need to surveillance require by procedure of quality inspection. As per the Aramco standard and International Standard base on site condition. Invite and serve SAPMT for the RFI site activities. Invite PID for RFI and serve for the activities done. As per the Aramco Safety Procedure and Requirement concurrence the parties for the activities at siteSATIP-L-450-01, SATIP-L-350-02, SATIP-A-004-01, SATIP-A-004-02, SATIP-A-004-03, SATR-A-2001, SATR-A-2001-V, SATR-A2008. The SAIC as per the requirement of site activities of SATIP and Site Inspection. As the required standard International Aramco
Standard, SAES, SAEP, ASME B31.1, ASME B31.3, ASME B31.4, SAES-A-004, SAES-A-007,
As per Duties and Responsibilities need surveillance require by procedure of quality inspection. As per the Aramco standard and International Standard base on site condition. Invite and serve SAPMT for the RFI site activities. Invite PID for RFI and serve for the activities done. As per the Aramco Safety Procedure Requirement concurrence the parties for the activities at site.

July 2012 – Dec. 2012 : JOD Construction
Philippines.

Dec. 2011 – June 2012:
SUNG –DO Arabia Contracting Ltd., K.S.A.

Project:

Client:
Position: Shaybah NGL Power Generation, Qatalum CCPP, Riyadh PP11, Wasit Gas Plant Package 3 Project
Saudi Aramco & Marafic
QA/QC Mechanical / Piping Engineer

Overall Responsibilities :
To know the Standards Aramco and International; ASME B31.1, ASME B31.3, B31.4,
SAES; SAEP-327, SAES-A-004, SAES-A-007, SAES-B-017, SAES-L-108, SAES-L-109,SAES-L-150,
QA/QC programs for compliance, reviews inspection report before to present and sire joint inspection, perform quality assurance assessments at vendor stare-yard vendor certificate or accredited vendor of materials supplier as per project P.O, M.R Certificate, valve pressure test certificate and work order as per the proponent advice required, to give a good samples production, analyzers it, and makes recommendations on how to increase the quality of goods, be scientific as well as managerial concepts to be a successful quality control expert by inspecting, analyzing and writing reports about production.

August 2006 – Sep. 2011:
M.S. Al – Suwaidi Industrial Services Company Ltd., K.S.A.

Project:

Client:
Position: Saudi Aramco Jeddah Refinery and Petro Rabigh Refining Petro chemical Company
(T& I– Tank Farm 2006-2010), Saudi Electric Company (Power Plant –WR);(T& I–Tank Farm 2010-2011)
Saudi Aramco
QC Mechanical / Piping

Overall Responsibilities :
Review, design drawings and engineering specifications assuring that all applicable by the proponent as standard require / applied, request waiver, condition described to assure accurately present to the proponent, QA/QC programs for compliance, reviews inspection report before to present and site joint inspection, collects from the proponent, EMR-Engineering work requests inspection work sheet & reference drawing and for materials and preparing for Installation of Vessel, columns, pin-fan, boiler, piping’s, cooling towers, tanks & pumps, other civil works and utilities etc, as per the proponent require, prepare and submit to the proponent for approval, remark and recommendation of construction method statement in accordance with company procedure and proponent/ client standard requirements with inspection test plan and inspection QC checklist package of all covered / belongs by the projects also JSA, for Turn Around Shutdown – TRS 2011 and maintenance projects, performs non-destructive inspections to comply NDT of all welded structural components and mechanical components like e.g.: Valves, pumps, pressure vessel, tank & etc with a procedures and technical aspects, preparation of reports sketches, indicating the status of acceptance and rejection, perform internal & external inspection of plant piping and equipment in accordance with the applicable procedures, codes and standards for condition assessment, prepare and submit to Aramco Engineering Department & CSD/TSU. Standard procedure of methods of inspecting joints in accordance with SAES under API std-650-tenth edition of Welded Steel Tanks for Oil Storage Tanks; Standard and procedure API 653 – Tank Inspection, Repair, Alteration and Reconstruction. Standard and procedure AWS D1.1 – Structural Welding Code; Tank and Inspection – SAES-D-108 Repair, Alteration and Reconstruction of Storage Tanks. SAEP-1142, SAEP-1143, SAEP-1144, SAEP-1145 to meet the requirements of the personnel NDT. For Bottom and Shells. ASME B31.3, ASMEB31.4, ASME B31.8; SAMSS, SASD and SAEP.

Jan. 2001 – March 2006: JOD Construction
Philippines.

Project:

Client:
Position: Construction of buildings @ LGU 20%IRA Development Fund and Private

Government Fund
Project Supervisor

April 2000 – Dec. 2000 :
BIN NAJI CAR MAINTENANCE CENTER, K.S.A.

Position: Area Mechanical Engineer

Overall Responsibilities : Supervise day-to-day implementation and control in the execution of the unit, check the number of cards repaired and engine to be overhaul and body chassis, dismantled, dented, painted and not finish car, supervise allover & implements daily activities, to check progress of work regularly in a daily basis, execute work activities as per work schedule, implement and supervise assigned proper manpower scheduling and work load distribution, check the block hook with computer body and chassis analysis, review and check the quality of work the employees assigned and control unnecessary back job, prepare and submit reports on finished works before the given deadline, implement general safety and deadlines in respective areas of responsibilities.

April 1997 – March 2000: JOD Construction
Philippines.

Project:
Client:
Position: Barangay hall building and multipurpose Pavement & fencing.
LGU (Sub contractor)
Project Supervisor
Nov. 1996 – March 1997:

Position: TESDA, LGU Municipal Project
Philippines.
Automotive Mechanic Trainer

Jan. 1994 – Oct. 1996 :
Position: Barangay hall building and multipurpose Pavement & fencing.
LGU (Sub contractor)
Project Supervisor

Overall Responsibilities : Oversee the Construction Project from start to finish, ensure that construction activities move according to predetermined schedule, Periodic Inspection of construction sites, coordinate the efforts of all parties involved in the Project, which include the consultants, contractors, sub-contractors and laborers.