Roberto D.C. Irasusta
Registered Electronics and Communications Engineer

ECE # 38416

Civil Service Eligible

Email: [email protected]

• Mobile# +639425409927 • 2551 Liwayway St. Sta. Ana, Manila Philippines

PROFESSIONAL OBJECTIVE

To obtain a senior engineering or management position in a company where I can use my strong analytical, detail-oriented and interpersonal skills to improve services and products, reduce costs and lead times, delight customers and help and mentor others. All the while engaging in new challenges and learning experiences. I’m willing to work as a key player in a challenging and creative environment. Have the vision, the determination and competency to succeed, make a difference and deliver results.
Summary of Qualifications

·                     Worked more than 8 years for manufacturing companies as engineer

·                     Innovative, reading and understanding the schematic diagrams and product datasheets.

·                     Technically skilled at device failure analysis and bench testing, electronic circuit boards, systems and programs troubleshooting and provides accurate disposition through data analysis and study

·                     PLC & SCADA programming for production

·                     Proficient in Autocad, DOS and Turbo C,C++

·                     Lead and done countless of process improvement, cost reduction & machine efficiency projects.

·                     Many years of extensive engineering and management, leadership and mentoring, test and problem-solving experience.

·                     Well-versed in both digital and analog electronics with specific emphasis on Process, Equipment and Test Engineering.

·                     My engineering forte is in electrical, electronics and automated test systems. Expert at analyzing and solving the most complex of problems.

·                     Troubleshooting and issue resolution for production issues

·                     Equipment maintenance and repair

·                     Experience in FMEA, GR& R & 8D

·                     Years of construction, fiout and renovation experience for residential new builds, renovation, carpentry, plumbing, etc

·                     Done space saving designs for home fixtures improvement

Summary of Achievements

·                     Promotion from Equipment Technician to Quality Assurance, Reliability and Failure Analysis Engineer

·                     ISO and OHSAS Auditor

·                     Act as company’s representative for meetings/presentations to clients, suppliers and vendors in Singapore and Malaysia

·                     Managed operations of Plastic Packaging Manufacturing company in Malaysia

·                     Design modification of embossed carrier tape mould  which greatly reduces the rejection rate and wastage while still maintaining the best quality of products.

·                     Defined the standard for sealing process parameters in a specified product needs.

·                     Setting up of COGNEX vision camera and programming it to identify in-process products ahead and address the product in production.

·                     Plastic resin recycling project which reduce the company’s obtaining raw materials while still maintaining company standards and product specification.

·                     Cost reduction project of Polystyrene and A-PET materials. All of the company’s waste material reduction and recycling such as cartons and plastics resin

·                     Study and identify parameters to perform drop test for product and shipment reliability

·                     Study, set up & installation of PS & APET pancake ruler

·                     Streamline and implement guidelines reel pull testing

·                     Repair Multitest handlers spareboards

·                     Re-engineered and turn around unprofitable and broken production equipment and make it functional and useful again for production usage

WORK EXPERIENCE

Owner / Founder

DHI Builders and Contractors

2015 to Present
•          Ran day to day operations of contractor business

•          Residential house construction

•          Commercial Space renovation

•          Installation of modular fixtures

•          General carpentry

•          Interior design planning

•          Plumbing and electrical services

•          Bidding and obtaining jobs

•          Lead the planning, budgeting and direction of contractor projects

•          Review plans and specs during the schematic design of pre-construction

•          Providing materials, labor and equipment at the site

•          Experience in full on-site construction management, effectively schedule, monitor, and inspect all work from start to finish

•          Supervised activities at several construction sites

•          Responsible for estimating, budgeting, project management, scheduling, and all activities that take place on and off construction site.

•          Preparing and trying to complete work within budget

•          Assigning time-frame for each stage of work

•          Coordinating with master electricians, foreman and laborers

•          Lead and managed resolution of all issues during project construction and commissioning phases

•          Performed above average customer service and job skills.

•          Completed the job in a timely fashion

•          Listened to all customer comments, resolved any discrepancies and corrected any changes to deliver customer satisfaction

•          Monitored the safety of all activities, making on-site personnel safety the top priority

Senior / Expert Process Engineer

PCT TECHNOLOGY SDN.BHD.

No. 77D, JalanTampoi, 81200 Tampoi, Johor Bahru, Malaysia

August 2010 – August 2015
•          ISO9001 and OHSAS 18001 Auditor

•          Handles company operation and perform corrective actions as necessary

•          Ensuring that all aspects of an operation or process meet specified regulations and standards.

•          Leads and done process improvement projects, product optimization, cost reduction and machine efficiency projects

•          Act as Company’s Representative to meetings and presentations with the customers, suppliers and vendors in Singapore and Malaysia

•          Lead technical meetings and presentations with the company owner

•          Provide comprehensive training to production operators.

•          Increase productivity through reduction in process related plant delays and cycle time.

•          Supervise and maintain COGNEX vision camera 5000 series set-up and programming.

•          Improve on quality of in-process and final product through reduction of reject rate.

•          Improve existing in-process and final product properties.

•          Reduce cost through improvement in final product yield, minimize usage of production consumables, and optimize energy consumption in production.

•          Drive automation of production process.

•          Assessing processes for their relevance, and assessing the adequacy of engineering equipment.

•          Reviewing existing data to see if more research and information need to be collated.

•          Designing, installing and commissioning new production units, monitoring modifications and upgrades, and troubleshooting existing processes.

•          Conducting process development experiments

•          Preparing reports, flow diagrams and charts.

•          Assessing the availability of raw materials and the safety and environmental impact.

•          Managing the cost and time constraints of projects.

•          Ensuring the process works at the optimum level, to the right rate and quality of output, in order to meet supply needs.

•          Making observations and taking measurements directly, as well as collecting and interpreting data from the other technical and operating staff involved.

•          Provides appropriate in-process lot disposition based on the results of failure analysis and may hold all affected lots to ensure test integrity and reliability.

Test Quality Assurance and Reliability Failure Analysis Engineer

ALLEGRO MICROSYSTEM PHILIPPINES

Sampaguita St., Marimar Village, Bicutan, Paranaque City, Philippines

November 23, 2008 to February 23, 2010
Promotion to Test Quality Assurace Reliabilty and Failure Analysis Engineer
Determine the cause of C.I. lot rejects and how it was able to pass through 100% production testing.
Coordinates with Test Engineering personnel regarding the rejects found in the lot for proper disposition and corrective action.
Provides appropriate lot disposition based on the results of failure analysis and may hold all affected lots to ensure test integrity and reliability.
Prepare control plan, Gauge of Response in Reproducibility and Repeatability (GRR) study and Failure Modes and Effects Analysis (FMEA).
Formulate and disseminate 5M and 8D reports.
Communicates with US QA/PE counterpart regarding QC test software, CI electrical test flow and setup of new and/or existing products, and CI electrical failures.
Designs test fixtures, hardware, and software needed to qualify all products per existing QAR test equipment and CAS.
Assists in repairs of QAR equipment and testers, as needed.
Conducts training of QAR Inspectors and Technicians on QAR electrical testing procedures and setups.
Performs CI software checking and ensures all Check Inspection test software are updated and properly maintained.
Ensures that the control plans related to Check Inspection electrical test sampling are current and updated.
Performs engineering evaluations, and periodic review/update of existing QAR test procedures and setups for continuous improvement.
Generates periodic reports such as:
Ø  Failure Analysis report

Ø  Monthly activities report

Ø  Weekly CI PPM reject report

Ø  Failure Modes and Effects Analysis (FMEA)

Ø  Gauge of Response in Reproducibility and Repeatability (GRR)

Ø  Other reports as required

Performs other related duties as maybe assigned by the Sr. Test QAR Engineer.
 

IC Test Equipment Technician

ALLEGRO MICROSYSTEM PHILIPPINES

Sampaguita St., Marimar Village, Bicutan, Paranaque City, Philippines

May 15, 2007 to November 23, 2008
·         Executes daily and weekly maintenance activities.

·         Implements corrective actions to quality and machine performance related issues and provide feedback.

·         Performs repairs and maintenance on equipment including preventive/predictive maintenance activities of the following handlers

o   MT85XX handlers

o   MCT 36XX handlers

o   RASCO

o   MultiTest Handlers

·         Maintains Structurize (Seiri), Systematize (Seiton), Sanitize (Seiso), Standardize (Seiketsu) and Self-Discipline (Shitsuke)5S in all areas.

·         Provides technical support to production line.

·         Logs consistently on all repair activities done for all machines.

·         Ensures that his/her next shift I covered.

·         Submits timely status reports on the project, evaluation and qualifications.

·         Provides technical information to maintenance related problems in production.

·         Informs remaining spare parts on-hand.

·         Follows the standard operating procedures.

·         Performs incoming inspection of spare parts.

·         Prevents any equipment from 8-hours breakdown in a week.

·         Performs tools and instruments upkeep.

·         Reports issues and concerns affecting machine uptime and the quality of the product.

·         Keep tools and equipments in good condition.

·         Contributes ideas for continuous improvement.

·         Performs other related duties that may be assigned by the immediate supervisor or next immediate supervisor.

ON THE JOB TRAINING EXPERIENCE

Commission on Information and Communication Technology

NATIONAL TELECOMMUNICATIONS COMMISSION

BIR Road, East Triangle, Diliman, Quezon City, Philippines

Frequency Management Division

April 4, 2005 to May 30, 2005
§  Allocate/sub-allocate and assign the use of radio frequencies

§  Checking the frequency allocation and call signing

§  Encoding of license in the master data base

§  Performs other tasks as assigned by my supervisor

TECHNICAL & SPECIAL SKILLS

§  Technically proficient in word processing, spreadsheets such as MS Office Applications

§  Technically proficient in Turbo C++, Pascal. DOS programming.

§  Communication skills, can easily interact with people from all walks of life

§  Preparation of cluster program

§  Willing to be trained and assigned in other places

§  Project Planning & Management

§  Cost Estimation

§  Customer Service

§  Time Management

§  Quality Control

§  Cost Control

§  Negotiations

§  Supervision

§  Materials

§  Procurement & Handling

§  Construction Documentation

§  Ability to learn and adapt to new situations

§  Analytical, detail oriented and result oriented

§  Superb management skills

§  Unparallel problem solver

ELIGIBILITY

REGISTERED ELECTRONICS AND COMMUNICATIONS ENGINEER

Professional Regulatory Commission (Philippines)

November 2006

ECE # 38416

SSS # 34-04301072

TIN # 252 164 702 000

Pag-ibig# 101004433282

Passport # EC8060305

CIVIL SERVICE ELLIGIBLE

Career Service Professional Examination

EDUCATION

TERTIARY EDUCATION

Bachelor of Science in Electronics and Communications Engineering

Baliuag University Baliuag, Bulacan, Philippines

June 2001– March 2006

With Honor

SECONDARY EDUCATION

San Rafael National Trade School

Caingin, San Rafael, Bulacan, Philippines

June 1997 – March 2001

Consistent Honor Student

Salutatorian

PRIMARY EDUCATION

Caingin Elementary School

Caingin, San Rafael, Bulacan, Philippines

June 1990 – March 1997

Consistent Honor Student

Salutatorian

AWARDS RECEIVED

“Academic Excellence Award”

Baliuag University Baliuag, Bulacan, Philippines

January 2002

“Academic Excellence Award”

Baliuag University Baliuag, Bulacan, Philippines

January 2003

“Academic Excellence Award”

Baliuag University Baliuag, Bulacan, Philippines

January 2006

“Service to the University”

Baliuag University Baliuag, Bulacan, Philippines

March 2006

“Service to the College”

Baliuag University Baliuag, Bulacan, Philippines

March 2006

SEMINARS AND TRAININGS ATTENDED

“OHSAS 18001: INTERNAL AUDITORS TRAINING

16HRS TRAINING PROGRAM

PCT Technology Sdn. Bhd. Conference Room

January 13-14, 2011

“OHSAS 18001: LEGAL AND OTHER REQUIREMENTS, HAZARD IDENTIFICATION, RISK ASSESSMENT AND DEERMINATION OF RISK CONTROL (HIRARC), EMERGENCY RESPONSE & PREPAREDNESS (ERP) TRAINING”

16HRS TRAINING PROGRAM

PCT Technology Sdn. Bhd. Conference Room

November 3-4, 2010

“OHSAS 18001: AWARENESS & STANDARD CLAUSES TRAINING”

16HRS TRAINING PROGRAM

PCT Technology Sdn. Bhd. Conference Room

October 14-15, 2010

“WORK ATTITUDE AND VALUES ENHANCEMENT PROGRAM”

8HRS TRAINING PROGRAM

Allegro Microsystems Philippines Training Room 4

Sampaguita St. Marimar Village, Bicutan, Paranaque City, Philippines

November 09, 2007

“MAINTENANCE TRAINING FOR MT85XX HANDLERS”

16HRS TRAINING PROGRAM

Allegro Microsystems Philippines Training Room 4

Sampaguita St. Marimar Village,Bicutan, Paranaque City, Philippines

June 22, 2007

“WORK ATTITUDE AND VALUES ENHANCEMENT PROGRAM”

8HRS TRAINING PROGRAM

Allegro Microsystems Philippines Training Room 4

Sampaguita St. Marimar Village, Bicutan, Paranaque City, Philippines

June 22, 2007

“SAFETY MANAGEMENT AND DEVELOPMENT TRAINING”

8HRS TRAINING PROGRAM

Allegro Microsystems Philippines Training Room 1

Sampaguita St.,Marimar Village,Bicutan, Paranaque City, Philippines

May 25, 2007

“Seminar on Avionics”

8HRS TRAINING PROGRAM

BahaynaBatoBaliuag University Baliuag, Bulacan, Philippines

March 13, 2006

“Seminar on Mechatronics”

8HRS TRAINING PROGRAM

AVR2 AVIM Center Baliuag University Baliuag, Bulacan, Philippines

December 15, 2005

“Seminar on ISO 900 Quality Management Systems”

8HRS TRAINING PROGRAM

BahaynaBatoBaliuag University Baliuag, Bulacan, Philippines

November 29, 2005

“Seminar on Bluetooth Technology”

8HRS TRAINING PROGRAM

BahaynaBatoBaliuag University Baliuag, Bulacan, Philippines

March 11, 2005

“Seminar on Engineering the Internet”

8HRS TRAINING PROGRAM

AVIM Center Baliuag University Baliuag, Bulacan, Philippines

February 10, 2005

“Seminar on Robotics and Automation Systems”

8HRS TRAINING PROGRAM

BahaynaBatoBaliuag University Baliuag, Bulacan, Philippines

February 5, 2005

“Seminar on Microwave Communication System”

8HRS TRAINING PROGRAM

AVIM Center Baliuag University Baliuag, Bulacan, Philippines

January 24, 2005

“Seminar on Local Area Network”

8HRS TRAINING PROGRAM

Audio Visual Room Baliuag University Baliuag, Bulacan, Philippines

December 13, 2004

“Seminar on Optical CDMA Technology”

8HRS TRAINING PROGRAM

AVIM Center Baliuag University Baliuag, Bulacan, Philippines

March 11, 2004

“Seminar on Artificial intelligence”

8HRS TRAINING PROGRAM

AVR AVIM Center Baliuag University Baliuag, Bulacan, Philippines

December 12, 2003