Professional Profile
USMAN GHANI
Karachi, Pakistan . +92 313 9290252 / +92 317 2442826 [email protected]
‘’Seeking a challenging position in an organization that provides a dynamics
environment where I can enhance my knowledge and expertise through enthusiasm, hard
work, and dedication and to best of my abilities.’’
Experience

ASTRO FILMS LIMITED (PAKISTAN)

12th MAY 2015 TO STILL
Working as Electrical Supervisor in Astro Pack Ltd unit # 3 of Ismail Industries
KEY RESPONSIBILITIES
 Arrenge Toolbox Talk Meeting. Prepare the Attendance overtime and reports of work progress on daily,
 Prepare the Data Record for facilities providing Electrical Mechanical Civil and Plumbing etc.
 Assign the job order to Electricians and observe the work standard PPM the Electrical Panel’s and DBs as per
schedule Corrective and preventive maintenance , Working on fault rectification of Circuit boards, Limit Switches,
Heaters, Fire Alarm System,. Maintain and control Protections Circuits such as Switchgears, Magnetic Contactors,
Circuit Breakers, and maintenance of AC/DC motors Exhaust Fans and Drives & VFD’s Thyristors. Thermal
Overload, Star-Delta Starters and different types of Sensors etc
 Assign the job order to Aircon Technician and observe the work standard for AHU’s ,FAHU’s and FCU’s Service,
Performing testing or mechanical operations /repair components including troubleshooting. Repair, modify.
Working on Pneumatic systems, Hydraulic pumps, proportional valves, solenoid valves, Gears, Timing belts,
Pumps, Heat Exchangers and Bearings. etc.
 Assist the Technician’s on site for training quality in Safety Electrical,Fabrication and Electrical Welding work
 Working, Profibus SCADA systems, PLC’s and BMS system.
 Working on Vapour compression (GREE & Carrier Chillers) Compressors,
 C.P.P. (Cast Poly Propylene) films plant Gruppo Colines (CFS/280), Primary film slitting machine of Atlas (CW800),
Secondary film slitting machine of Harmony, Film Metalize plant of Boobst General Vacuum, waste film Recycling
machine,
CTFM FACILITIES MANAGEMENT OF AL TAMIMI INVESTMENTS. (U.A.E) 7thNov -2014 to 15thMar -2015
Worked as M.E.P Supervisor in CTFM Facilities Management of Al Tamimi Investment
KEY RESPONSIBILITIES:
 Assigning the job order to technician and observe the work standard
 Perchasing the Required Material and provide to technicians.
 Inspecting the Completion or Required work areas of tenant or Owner properties.
 Collecting and submiting the Quotations from Material stores and Contractors.
 Preparing reports of work progress.

ENOVA (Facilities Management) FORMERLY MAF DALKIA MIDDLE EAST LLC UAE 1

7th Dec -2007 to 28th Sep -2014.
Worked as Sr, Electrical Technician Team Leader. ID :110527 (VOX Cinemas & Magic Planet) in MAF Enova Middle East LLC UAE
Worked in in(FCC) Fujairah City Center for VOX Cinemas and Magic Planet
Worked in (MOE) Mall of Emirates Dubai UAE as Electrical Technician in Operation Dept, for 2 years.
Worked in (DCC) Deira City Center Mall Dubai UAE as Electrical Technician, Carpenter, Painter and Mason for 1 year.
Worked in Baker Hughes Inc. Oilfield Supply Center Ltd. Jabel Ali Dubai UAE as Electrical Technician for 2 months.
KEY RESPONSIBILITIES:
 Prepare reports of work progress on daily, weekly and monthly basis and submit it
 PPM the Electrical Panel’s and DBs as per schedule
 Corrective and preventive maintenance of AHUS FCUs and Electrical DBs
 Fault finding, Repair the Short Circuits, Installations and wiring
 To conduct tool box talks and organize the documents as per IMS requirements
 Operate the BMS and observe the all equipments operation.
 To Receive the complains from call center and customers and following as per priority base
 Collect the quotations from different sub-contractors for big jobs
 Liaise and coordinate with sub-contractors to assure good operational status
 Operate the Cheery Picker AB38, Seizer and Up Rite Machines for change the high level lamps change.
 Operate the Omme 3000 machine for high access max 30 meters lamps change and other jobs.
 Repairing Door and lock cylinders , Repair the Sliding auto doors of Entrances
 Paint color on walls Door and floor, Repair the Gypsum Wall, Fix the Tiles Marbles (some time)

ASTRO PACK LIMITED (PAKISTAN)

1stNOV 2005 TO 11thDEC 2007.
Worked as Electrical Officer in on C.P.P. (Cast Poly Propylene) films plant Gruppo Colines (CFS/280), Primary film slitting
machine of Atlas (CW800), Secondary film slitting machine of Harmony, Film Metalize plant of General Vacuum, waste
film Recycling machine, Semi automatic Strapping machine and Overhead Rail Crane
KEY RESPONSIBILITIES:
 Perform mid-level (moderately complex) testing or mechanical operations on production/repair components
including troubleshooting.
 Prepare reports of work progress on daily, weekly and monthly basis and submit it
 Repair, modify, replace or otherwise perform routine maintenance work
 PPM the Electrical Panel’s and DBs as per schedule
 Participate in facility Continuous Improvement activities and initiatives.
 Perform inspection, repair and components equipments and ensure compliance with stated requirements of the
Original Equipment Manufacturers'(OEM) Component Maintenance/Overhaul Manuals.
 Complete job assignments in a timely manner.
 Communicate effectively with other maintenance personnel at all levels

PHOENIX ARMOUR (PVT) LIMITED (PAKISTAN)

Six Months 2004.
Worked as Security Alarm Technician on the Following Fire Burglar and Security Alarm System Control Panel and Keypad
and Sensors.
1) XL-2T of FBII and keypad XL4600SM from USA.
2) SP-850 of ARROWHEAD and LED keypad KP600F from USA
3) Breaking Sensors (VIPER PLUS INT’L ELECTRONICS INC, USA) Opening magnetic Contact Sensors (ADAMCO INC,
USA) Smoke Detector, System model 2412/2424E Direct Wire (PITWAY TECHNOLOGICA S.P.A. ITALY) Movement
detector, Wireless Panic G.D.type and others security accessories
KEY RESPONSIBILITIES
 Installation of new Security Alarm Panel, Opening Contact, Passive Infrareds, Vibrations Sensors, Cabling etc.
 Repair damage cables, Contacts OC etc
 Maintenance as per schedule with testing overall system and programming and system briefing.

CONSOLIDATED CONTRACTORS INTERNATIONAL S.A.L CO (U.A.E)

Ten Months 2000.
Worked as Instrument Technician with Consolidated Contractors Int’l, Company. Electro Mechanical projects of ADNOC
(Abu Dhabi National Oil Co) its Sulpher Refinery OGD-II in Habshan Abu Dhabi U.A.E.
KEY RESPONSIBILITIES
 Worked on site E&I Cable pulling. Electrical power and control armored screen plat cables. Instruments control xray
armored screen cables of different sizes.
 Worked on A.B.B. Panels for automation wiring connection with engineering drawing under guides American
Engineer. ·
 Worked on site Instruments Level, Flow, Temperature and Pressure Transmitters connection DB to Instruments.

BRINK’S PAKISTAN (PVT) LIMITED (PAKISTAN)

17thJune -1996 to 13thJan -2000. Worked as Electronics Burglar Alarm System Technician on the Following Fire Burglar and Security Alarm System Control Panel and Keypad and Sensors.
1) Avenger Panel with Default Keypad / D.T.I. Panel with Default Keypad / SP600 Panel with KP600F Keypad/ SP650 Panel LED KP600F
2) Wireless panic LINER ,G.D type / Smoke detector 2412/2424E PITWAY/ Vibration sensors, Passive Infrared movement detector REFLEX / Opening contact
ADAMCO INC USA
3) Astrophysics (X-Ray’s machine security checking) cleaning and services under Engineer.
KEY RESPONSIBILITIES
 Installation of new Security Alarm Panel, Opening Contact, Passive Infrareds, Vibrations Sensors, Cabling etc.
 Repair damage cables, Contacts OC etc
 Maintenance as per schedule with testing overall system and programming and system briefing.

DIPLOMA OF ELECTRICAL
Honorary Diploma of Associate Engineer/ Electrical Technician from THE INSTITUTE OF ENGINEERS & TECHNICIANS.
Registered from ALL PAKISTAN COUNCIL OF SKILLED WORKERS in 2006.

ACADEMIC QUALIFICATION
S.S.C. (Matriculate) in year of 1991.

TECHNICAL QUALIFICATION (Certificate courses)
1) Half-year course from Karachi Shipyard & Engineering works in trade of General Electrician in year of 1995 (Pakistan).
2) Half-year course from Al-Raheem Commercial Center in trade of Typist. In 1990 in Karachi Pakistan.
3) Half-year course from Al Noor Computer Center for MS Office and Internet in Karachi Pakistan.
4) One Day course from MAJID AL FUTTAIM Leisure for Fire Marshal Training in 26 April 2011 in Dubai UAE.
5) One Day course from SIEMENS for Introduction to BMS & Desigo System in 18 September 2011 in Dubai UAE.
6) Two Days course form INTERNATIONAL EXPERTS CENTRE FOR MANAGMENTS CONSULTATION in Supervisory Skills in 11/12 September 2011 in Dubai UAE.
7) One Day course from DUBAI CIVIL DEFENCE for Basic Fire Fighting in 04 October 2011.
8) Training for Basic Electric Troubleshooting from Veolia Environment of France in 7, 8 and 9 February 2012
Dubai UAE.
9) 4/5 April 2012 Advance Electric Troubleshooting course from Veolia Environment of France in Dubai UAE.
10) 18 /19 June 2012 Course from Al Laith Scaffolding LLC Dubai for IPAF Cheery Picker Operator Training (MEWP) Mobile Elevating Work Platforms for (Static Vertical (1a). Static Boom (1b), Mobile Vertical (3a) . Mobile Boom (3b) Operator Licenses Number: OP/0747913 Issue by (IPAF) INTERNATIONAL POWERED ACCESS FEDERATION UK.
11) January 2000 Safety Work Certification from Technip Bechtel .OGD-II, ADNOC Habshan Abu Dhabi UAE
12) Basic Refrigeration course from Veolia Environment of France in Dubai 31March to 2 April 2013 in Dubai UAE
13) 24 April 2014 a day Basic Scaffolding Operator Training from Kasco Occupational Training LLC Dubai UAE
14) September 2012 a day Course for Basic First Aid Training from UAE Red Crescent

Award /Best performance
Star Performance Award of the year 2017-2018 from Ismail Group of Industries Pakistan

EXTRA ORDINARY abilities
1. Carpenter shop for 2 months.
2. Electric Welding Training for 02 month.
3. Fiber Optical for splicing fiber cable with GPON Engineer for 2 weeks.
Professional website LinkedIn:

https://www.linkedin.com/in/usman-ghani-seeking-a-new-opportunity-5692b719/