Victorio Gemora Trinidad
Home Address: Tulaoc, San Simon, Pampanga
Current Address: Tulaoc, San Simon, Pampanga
Mobile Number: +639212536300
E-mail Address: [email protected]

Objective:
A position as an industrial electrician which will allow me to use my skills and strong experience in performing maintenance and repairing work on electrical equipment and progress in my career.

POSITION:

ELECTRICAL MAINTENANCE

SKILLS, SCHOLASTIC RECORD & WORK HISTORY

SKILLS
• Strong working knowledge of job site safety as well as ability to complete to a company specific safety orientation.
• Basic knowledge of quality assurance principles.
• Strong teamwork and communication skills, ability to resolve problems and work towards agreeable solutions.
• Working knowledge of three phase motors, control circuit and National Electric Code.
• Proficiency Microsoft Word , Microsoft Excel, Microsoft Power point, Microsoft Outlook, Internet browsing software and read and interpret Electrical drawings such as electrical schematic diagram, electrical cable schedule, electrical termination drawing, pre-commissioning and commissioning works.
• High level of safety awareness.

SCHOLASTIC RECORD
Graduated,Tertiary Education
Industrial Technology
Central Luzon Institute of Technology
1995-1997

Graduated, Secondary Education
Pampanga Central High School
1991-1994

Graduated, Primary Education
Sampaloc Elementary School
1985-1990

WORK HISTORY

1.Company :NorthStar World Steel Corporation
Project& :Pre-shutdown and Shutdown of Steel Rolling Mill Plant (Pulilan,Bulacan)
Location & Rehabilitation of Steel Melt Plant (Apalit,Pampanga),Philippines
Duration : October 2017 to Present

Position : Industrial Electrician/Electrical Maintenance

Job Description:
Steel Rolling Mill Plant (Pulilan,Bulacan)
• Analyzed and resolves work problems and provide assistance to interdepartmental personnel; machinists, rebuilders and mechanics. Performs other related duties as assigned or requested.
• Assures work conforms to Philippines Electric Code (PEC) and National Electric Code (NEC).
• Follows approved, safe working procedures including Lock out Tag out (LOTO) of live systems.
• Keeps work area clean and hazard free.
• Following planning schedule of pre shutdown and shutdown activities of relocation, rewiring, termination of cables, cable testing continuity and insulation resistance test of low voltage cables, motor winding test of LV & HV motors, reinstallation panels of Entry Motor Control Center (EMCC), Center Motor Control Center (CMCC) & Delivery Motor Control Center (DMCC) and testing and commissioning of EMCC, CMCC and DMCC system as per target date completion schedule.
• Fabrication of frames for panels, circuit breakers, junction box and welding of supports.
Steel Melt Plant (Apalit,Pampanga)
• Analyzed and resolves work problems and provide assistance to interdepartmental personnel; machinists, rebuilders and mechanics. Performs other related duties as assigned or requested.
• Assures work conforms to Philippines Electric Code (PEC) and National Electric Code (NEC).
• Follows approved, safe working procedures including Lock out Tag out (LOTO) of live systems.
• Keeps work area clean and hazard free.
• Performs preventive maintenance on machinery, equipment and control circuitry to ensure proper operation. Makes necessary adjustments on repairs.
• Investigate, recommend and execute modifications to improve existing equipment performance.
• Make recommendations to improve equipment operation/efficiency, reduce maintenance costs and improve maintenance service.
• Operating mobile equipment, including forklift trucks, lifts, billet cranes to assists with production work.
• Performing work requiring extensive knowledge of electrical schematics, including electronic theory and principles.
• Evaluate potential risks to similar processes and develop work orders and plans to resolve issue.
• Replaces faulty electrical components of machine such as relays, switches and motors and position sensing devices.
• Install power wiring, conduit cable ladder and trays as per NEC and NEMA standards.
• Align, adjust and calibrate equipment according to specifications.
• Operated Digital Multi-Meters, Insulation resistance tester, and Grinders with 100% safety.
• Diagnosed malfunctioning transformers, motors, and lighting fixtures.
• Ability to communicate appropriately with the supervisors and engineers.
• Tracing, diagnosing and rectifying electrical faults.
• Fabrication of frames for panels, circuit breakers, junction box and welding of supports.

2.Company :GMS Gulf Marine Services
Location : Abu Dhabi, UAE
Duration :September 2015 to October, 2016

Position : Industrial Electrician

Job Description:
• Install electrical equipment such as electrical controls, electrical motors, pneumatic.
• Plan layout of wiring, install wiring, conduit and electrical apparatus in plant.
• Diagnose and test malfunctioning apparatus such as transformers, motors, controls and lighting fixtures and replace damaged or broken wires, cables, and parts.
• Installation of cable trays as per NEMA standards.
• Installation of junction box, cable pulling and termination of electrical, instrument and telecoms cable.
• Performing cable continuity and insulation resistance test of cable

3.Company :Stronghold Steel Corporation
Location : Apalit, Pampanga Philippines
Duration : December 1997 to January 2015

Position : Electrical Maintenance/Pulpit Control Operator

Job Description: (Electrical Maintenance)
• Huge experience as industrial electrician in reputed organization.
• Develop and maintain inventories of electrical materials.
• Able to test, install, repair, and maintain electrical equipment and machines.
• Expert in using a range of power and hand tools.
• Complete understanding of the safety rules applicable in electrical field.
• Exceptional ability to replace old electrical system wiring without any damage.
• Maintain and repair new and old installed electrical systems.
• Provide preventive and predictive maintenance of the electrical systems, conducting daily rounds and readings.
• Maintain records of all electrical equipment.
• Monitor the replacement of electrical components.
• Troubleshoot problems in electrical circuits.
• Organized all electrical equipment in suitable area.
• Prepared layout and setting up of electrical wiring and tools based on work condition and local codes.
• Maintaining and cleaning of charging, magnet and billet cranes for electrical circuit controls, LV motors and transformers.
• Responsible for maintaining water treatment pump motors and circuit controls to ensure the cooling system are working operational.
• Performs the periodic preventive maintenance of the plants electrical system.
• Replace electric motor bearings and rewire motors.
Job Description: (Pulpit Control Operator)
• Set mill up for section required.
• Input speed and parameters.
• Ensure correct sequencing of equipment prior to rolling.
• Safeguard equipment from damages or safety related issues.
• Ensure safety is practiced in all areas of the mill when starting drives and controlling equipment.
• Sets up and operates hot or cold rolling mill to reduce or form nonferrous metal into plate, sheet, foil, flatwire, and rod of specified dimensions: Adjusts rollers, buffs, and guides according to size and dimensions of workpiece, using screwdowns, micrometer, steel tape, and handtools.
• Turns valves and observes gauges to regulate flow, temperature, and solution of roll lubricants and metal coolants.
• Starts entry or rolloff tables that feed metal to and from rolls.
• Threads sheet or rod through rolls for further reduction, or signals ROLLING-MILL-OPERATOR HELPER to feed separate sheets or rods through rolls.
• Controls speed of rolling mill and roll tables to synchronize flow of metal with tandem operations, using signals or communications system.
• Measures width and gauge of rolled metal, using linear tape and depth gauge and adjusts rolls to form metal to specifications.
• Observes rolling operation to detect curling, splitting, or buckling of metal.
• May change rolls on rolling machine, using chain or power hoist.
• May be designated according to type of mill operated as Tandem-Mill Operator; or condition of metal rolled as Cold-Mill Operator; Hot-Mill Operator.

CONTACT REFERENCES

Nicholas Borgonia
Sr. Electricla Engineer

Ricardo V. Cabanggangan
Electrical Engineer

Jonas E. Cabanggangan
Electrical&Instrument Supervisor

I hereby certify that the above-mention are true and correct to the best of my knowledge and belief.

Victorio G. Trinidad