Adrian D. Panganiban

ADRIAN DE CHAVEZ PANGANIBAN 222 San Isidro, Batangas City,

Batangas, Philippines

Cel #.: 09176669796

Position: Pipe Insulator / Tin smith

CAREER OBJECTIVE

To be able to participate in the company’s operation that will enhance all my knowledge and skills in the field, towards realization of company’s vision and mission to attain excellence in the present and future needs and demands of the society.

EMPLOYMENT EXPERIENCE

Cape Philippines

6th Floor iHub 1, Northgate CyberZone, Filinvest Corporate City, Alabang Zapote Road, Muntinlupa City, Philippines 1781

Muntinlupa Philippines

Port Moresby Power Station Project

Papua New Guinea

Lagger / Tin smith

September 14, 2018 to February 01, 2019

Duties and Responsibilities:

· Participate in pre-start and tool box meeting, Participate in step-back 5×5 per quarter of work.

· Participate in the development of Job Hazard Analysis (JHA)’s and site risk assessment discussions.

· Follow all client safety procedures and objectives.

· Read and understand all relevant permits, method statements and risk assessment discussions

· To curry out all works in a professional manner and to the required specification.

· Conversant with all insulation standards and specifications.

· Competent with insulation, coating and cladding application.

· To insulate steam tracing, copper tubing

· To insulate pipe and elbows, Tee reducer.

· To insulate drums, vessels, heater exchanger, columns and underground pipe.

· Be prepared to assist all other trades within his capability in the performance of operations being carried out be they construction or maintenance.

· Responsible in inspecting and maintaining insulation equipment before use.

· Sheet metal fabricating

· Housekeeping before/during/after of work.

Cape Australia Pty Ltd.

Level 17, London, House, 216 St. Georges Terrace WA 6000

Bayu Undan Maintenance Project

IRATA L1 Lagger

31 March 2018 to June 22, 2018

Duties and Responsibilities:

· Participate in pre-start and tool box meeting, Participate in step-back 5×5 per quarter of work.

· Participate in the development of Job Hazard Analysis (JHA)’s and site risk assessment discussions.

· Follow all client safety procedures and objectives.

· Read and understand all relevant permits, method statements and risk assessment discussions

· To curry out all works in a professional manner and to the required specification.

· Conversant with all insulation standards and specifications.

· Competent with insulation, coating and cladding application.

· To insulate steam tracing, copper tubing

· To insulate pipe and elbows, Tee reducer.

· To insulate drums, vessels, heater exchanger, columns and underground pipe.

· Be prepared to assist all other trades within his capability in the performance of operations being carried out be they construction or maintenance.

· Responsible in maintaining personal log books to confirm experience and promote progression in qualification; log nature of work, customer’s name and team size; duly countersigned by the Rope Access L3 Supervisor.

· Must always wear appropriate PPE before carrying out rope access activities.

· Carry out regular training exercises involving Rescue Techniques as required.

· Responsible in inspecting and maintaining equipment before use.

· Sheet metal fabricating

· Ulva shield fabricating.

Joel Chavez Construction and General Services

JG Summit , Petrochemical Plant Shutdown

#768 Libjo, D’hope, Batangas City, Batangas Philippines 4200

Instrument technician

May 15, 2017 – May 26, 2017

Duties and Responsibilities:

· Attend daily tool box meeting to know work priority and safety acknowledgement.

· Checking of Industrial Instrument

· Calibration of Industrial Instrument (Pressure, temperature and Flow)

· Assist Maintenance in Instrument Fitting and mechanical work.

· Pull-out instrument in way of mechanic work

· Cable lay-out to replace damage instrument cable.

· Remove defective and install new pipe tubing of pressure indicator and relief valve

· Replace o-ring and packing of valve actuator

· Replace defective solenoid

· Install new solenoid ball valve

· Practice good housekeeping before and after work.

Dyundia E/C Jicon

Hyundia / UAE Mirfa IWPP Project

Insulator

November 29, 2016 to February 11, 2017

Duties and Responsibilities:

· Attend morning safety meet

· Prepare insulation material and tool to be use

· Arrange all the tools and equipment to be use

· Secure the work area is safe to work in (barrages and signage)

· Check the condition of the work piece if it is safe to work on to

· Measure and cut insulation to be install

· Install pipe insulation

· Install vapor barrier

· Install metal cladding

· Housekeeping before, during and after work are done

SiteServ Inc

Malampaya OGP (Onshore Gas Plant)

Tabangao, Batangas City, Batangas, Philippines

Person in Charges to the Work Site (PICWS)/Team Leader

Blasting / Painting / Insulator / Chartek Applicator (FP)

July 01, 2015 to October 29, 2016

Duties and Responsibilities:

· Attend morning safety meet

· Secure accurate work permit for the job to be done

· Discuss tool box meeting to work parties and concerned personnel

· Coordinate with the Area Authority for the procedure of the work to be done

· Discuss safety to work party and parties near the work site

· Secure and monitor the safety of the work party and equipment

· Arrange all the tools and equipment to be use

· Secure the work area is safe to work in (barrages and signage)

· Check the condition of the work piece if it is safe to work on to

· Arrange all the tools and equipment to be use

· Install / dismantle temporary habitat for blasting

· Manual De-rusting / Grit Blasting of pipe and vessel

· Spray / manual painting of pipe and vessel

· Prepare insulation material and tool to be use

· Measure and cut insulation to be install

· Install pipe insulation

· Install vapor barrier

· Install metal cladding

· Mix chartek7 according to specification

· Apply chartek7 to pipe

· Install HK-1 mesh

· Work as for Client Specification

· Ask QA / QC personnel to check the job being done and their go signal to proceed to the next job / procedure

· Report with supervisor and Area Authority about the status on the work

· Housekeeping before, during and after work are done

SiteServ Inc

Malampaya Shallow Water Platform (Off-shore Platform)

Palawan, Philippines

Person in Charges to the Work Site (PICWS)/Team Leader

Blasting / Painting / Insulator

August 16, 2014 to June 30, 2015

Duties and Responsibilities:

· Attend morning safety meet

· Secure accurate work permit for the job to be done

· Discuss tool box meeting to work parties and concerned personnel

· Coordinate with the Area Authority for the procedure of the work to be done

· Discuss safety to work party and parties near the work site

· Secure and monitor the safety of the work party and equipment

· Arrange all the tools and equipment to be use

· Secure the work area is safe to work in (barrages and signage)

· Check the condition of the work piece if it is safe to work on to

· Arrange all the tools and equipment to be use

· Install / dismantle temporary habitat for blasting

· Manual De-rusting / Grit Blasting of pipe and vessel

· Spray / manual painting of pipe and vessel

· Prepare insulation material and tool to be use

· Measure and cut insulation to be install

· Install pipe insulation

· Install vapor barrier

· Install metal cladding

· Mix chartek7 according to specification

· Apply chartek7 to pipe

· Install HK-1 mesh

· Work as for Client Specification

· Ask QA / QC personnel to check the job being done and their go signal to proceed to the next job / procedure

· Report with supervisor and Area Authority about the status on the work

· Housekeeping before, during and after work are done

CJI / SiteServ J.V. Inc.

Malampaya OGP (Onshore Gas Plant)

Tabangao, Batangas City, Batangas, Philippines

Insulator / Chartek applicator / Blaster / Painter

December 01, 2013 to August 15, 2014

Duties and Responsibilities:

· Attend morning safety meeting

· Attend tool box meeting

· Secure the work area is safe to work in (barrages and signage)

· Check the condition of the work piece if it is safe to work on to Arrange all the tools and equipment to be use

· Install / dismantle temporary habitat for blasting

· Manual De-rusting / Grit Blasting of pipe and vessel

· Spray / manual painting of pipe and vessel

· Prepare insulation material and tool to be use

· Measure and cut insulation to be installed

· Fabricate insulation for pipe elbow, tee, reducer, and etc

· Install hot / cold insulation prior to client specification

· Install vapor barrier

· Install GRP / metal cladding

· Mix chartek7 according to specification

· Apply chartek7 to pipe

· Install HK-1 mesh

· Work as for Client Specification

· Housekeeping before, during and after work are done

Atlantic, Gulf & Pacific Company of Manila Inc. (AG&P)

Heavy Fabrication Yard

San Roque, Bauan, Batangas

AG&P / Bechtel GLNG Plant Module Project

Insulator

December 08, 2012 to October 07, 2013

Duties and Responsibilities:

· Attend daily tool box meeting to know work priority and safety acknowledgement.

· Practice good housekeeping before and after work.

· Prepare insulation material and tool to be use

· Measures and cut insulation to be installed

· Fabricate insulation for pipe elbow, tee, reducer, and etc

· Install hot / cold insulation prior to client specification

· Install vapor barriers on pipe insulation before cladding

· Install Cladding after insulation are install and check by Quality Assurance

· Cover insulation properly before leave work area

Joel Chavez Construction and General Services

#768 Libjo, D’hope, Batangas City, Batangas Philippines 4200

Instrument technician

June 08, 2008 to December 07, 2012

Duties and Responsibilities:

· Attend daily tool box meeting to know work priority and safety acknowledgement.

· Practice good housekeeping before and after work.

· Checking of Industrial Instrument

· Calibration of Industrial Instrument (Pressure, temperature and Flow)

· Assist Maintenance in Instrument Fitting and mechanical work.

· Disassembling and assembling of instrument in way of mechanic work

· Cable lay-out to replace damage instrument cable.

· Fabricate and install new pipe tubing of pressure indicator and relief valve

· Replace defective solenoid

· Install new solenoid ball valve

· Measures and cut insulation to be installed

· Remove / Re-install cladding and insulation in preparation for maintenance request

Keppel Batangas Shipyard

Brgy. San Miguel, Bauan, Batangas

Shipwright Project Trainee Engineer

January 16, 2008 to May 23, 2008

Duties and Responsibilities:

· Attend meeting with owner representative, department engineer about the work to be done.

· Make schedule and step of work to be done.

· Coordinate with other department prior to the work to be done

· Checking of Industrial Instrument

· Calibration of Industrial Instrument (Pressure, temperature and Flow)

· Assist Electrician and Mechanical department in pipe and wiring installation

· Supervise ship jet wash and grit blasting

· Supervise Carpentry work and insulation installation

· Make schedule of work for contractor

· Attend daily meeting for reporting daily work accomplishment

· Make work report and acceptance report for owner and commercial department

EDUCATIONAL ATTAINMENT
Short Course : I&E Industrial System Services, Inc

Instrumentation Training Division

Libjo, Batangas City

June 2006 to December 2006

Course : Industrial Instrumentation

Tertiary : AMA Computer College

Beredo Building Kumintang Ibaba, Batangas City

2000-2004

Course : Bachelor of Science in Computer Engineering

Vocational : University of Batangas

Hilltop, Batangas City, Batangas, Philippines

1997-1999

Course : Electronics and Computer Technology

Secondary : Western Philippine Colleges

Hilltop, Batangas City

1991-1996

Primary : San Isidro Elementary School

San Isidro, Batangas City

1985-1991

TRAINING

Basic Occupation Safety and Health Training Course (BOSH)

Salus Consultancy Services

Red Cross, Kumintang, Batangas City, Batangas, Philippines

July 29, 2018 to August 19, 2018

Further Offshore Emergency Training

Consolidated Training System Incorporated

4F S&L bldg., 1500 Roxas Blvd., Ermita, Manila, Philippines

August 24, 2018

IRATA 1 Rope Access Technician

KB Associates Group of Company & Training Centres

No. 15 Changi North Street 1, I-Lofts @ Changi, #01-36, Singapore 498765

August 14, 2017 – August 18, 2017

Chartex 07(International Paint LTD)

CJI General Service

San Pascual, Batangas, Philippines

October 08, 2013 to October 27, 2013

Thermal Insulation and Sheet Metal Fabrication

Batangas Association for Guaranteed Metal Craft and Engineering Technology (BAGMET)

Libjo, Tacad, Batangas City

May 30, 2012 to June 20, 2012

Industrial Instrumentation Training Course

I&E Industrial System Service, INC

Tacad, Libjo, Batangas City

June 17, 2006 to October 24, 2006

CHARACTER REFERENCES
Mr. Doug Watts

Supervisor

Cape PNG Project

[email protected]

Mr. Arnel C. Catilo

Operation Manager

Joel Chavez Corporation

Operation Manager Libjo, Batangas City, Batangas

(043) 403-8888

Mr. Anicito Suarez

Insulation Supervisor

SiteServ Inc

Malampaya OGP (Onshore Gas Plant)

Tabangao, Batangas City, Batangas, Philippines

0928 667 1792

Adrian D. Panganiban Pipe Insulator / Tin Smith