Amante Bendijo Manzano Jr.

E-mail: [email protected]
Mobile #: +639176769484
Address: Block 56 Lot 29 Soldiers Hills Village,Brgy. Putatan,
Muntinlupa City, Philippines 1772

OBJECTIVES:

To belong to a prestigious company that requires a competent, efficient and dependable employee who is willing to serve the organization with dedication, knowledge and contribute to the growth of the organization.

JOB EXPERIENCE:

I. Nidec Sankyo Philippines Corporation (NSFL)
Plastic Injection Molding Company
Main Ave. corner Binary st. LISP-1 Bo. Diezmo,
Cabuyao, Laguna, Philippines

PRODUCTION SUPERVISOR
July 15, 2014 – September 8, 2018
Production Molding Department
 Monitoring the total output per day, including the defects and immediately conduct investigation and develop corrective and preventive action.
 Maintain positive employee relation and adhere to company policies, safety standards, and good housekeeping practices.
 Coordinate with outside vendors regarding maintenance and repair for tooling and equipment.
 Maintain the production check sheet, forms etc. and it should be check in a daily basis.
 Reviews production schedule and work orders, and assigns duties to workers according to order priorities.
 Supervises and coordinate activities of workers engaged in molding plastic products, applying of molding machine set-up and operating techniques and production method.
 Supervise troubleshooting and adjustment of molding parameter to maintain quality and maximum product output.
 Conduct or direct trainings of new employee in machine operation.
 Perform problem-solving to develop corrective actions for customer issues or to initiate continuous improvement.
 Lead small/large team of people in execution of production daily task, work scheduling, training, maintenance and in continuous improvement.
 Confers with management and other supervisors to resolve production problems.

II. IM Digital Philippines Inc.
Optical Pick-Up Manufacturing Company
Lot 21-A, Phase 1-A, First Philippine Industrial Park
Sta. Anastacia, Sto.Tomas, Batangas, Philippines 4234

EQUIPMENT ASSISTANT SUPERVISOR
March 26, 2012 – February 07, 2014
OPU Department
 Monitor PM Schedule compliance.
 Monitor PM completion effectiveness (Actual vs plan)
 Maintain/Improve the equipment performance.
 Assure that all key equipments are available.
 Monitor/Check/Repair Equipment
 Support yield and Continuous Improvement activities related to the Optical Pick-Up assembly equipment by means of in-depth knowledge and experience with leading edge processing technologies and equipment.
 Participate in troubleshooting task forces as needed and help develop solutions that prevent recurrence.
 Continue to improve process robustness for high volume manufacturing using statistical tools,data driven decision making and systematic problem solving skills.
 Contribute to installation, start up and volume ramp for all OPU equipment, as well as all maintenance aspects.
 Establish equipment engineering and maintenance related business processes necessary to run the tools in production, as well as their documentation according to quality standards.
 Define and control maintenance programs, as well as their continuous improvement.

II. JX Nippon Mining & Metals Philippines, Inc. (Formerly Nikko Metals Philippines Inc.)
Treated Rolled Copper Foil Manufacturing Company
#117 E-Science Avenue, SEPZ Laguna Technopark, Binan Laguna

PRODUCTION ENGINEER (TRCF Specialist)
September 18, 2006 – February 25, 2011
TRCF Production Department
 Monitor process parameters in order to maintain good product quality and ensure evaluation and inspection methods are being done.
 Identifying abnormalities, product defects and quality problems and propose countermeasures to improve quality of products.
 Monitor TRCF-Slitline equipment to maintain good running condition and identify possible equipment abnormalities with consideration on safety, quality and cost..
 Ensure safe working conditions by finding valid safety non-conformances, danger prediction (KYT) and providing countermeasures to such in coordination with immediate superior.
 Maintain high safekeeping standards pertaining to quality records and other pertinent documents.
 Responsible for line start up and shut down as per approved production plan and give suggestions to on how to maximize production operation.
 Act as shift-in-charge and manage the slitline operation in the absence of the Shift Supervisor.

III. OGINO Philippines Corporation
Manufacturing of machining parts for motor hard disc drive for computer and rocker arm assembly for automotive parts.
#132 East Main Avenue, Phase 5 Laguna Technopark, Barangay Loma 4024

JUNIOR ENGINEER
January 25, 2006 – May 31, 2006
Production Department
 Responsible for the good running condition of all machine and equipment in production.
 Ensure the quality standard and quality system are met and maintained.
 Responsible for the improvement quality and productivity.
 Conduct evaluation and analysis of NG units which aim to improve yield.

IV. Technol Eight Philippines Corporation
Stamping,welding & painting assembly of motor vehicle parts, dies & molds Manufacturing Company
#127 East Main Ave. Laguna Technopark, Binan Laguna

TEAM MEMBER (Production Operator)
July 7, 2005 – December 23, 2005
Production Department
 Responsible for line start and stop as per approved and updated Production Plan.
 Perform actual operation of machine/s (Press machine using die tool).
 Prepare shift endorsement for proper information and turnover to incoming shift.
 Assist/Support in performing activities such as start-up, maintenance, periodic quality,
in- process inspection/evaluation, monitoring and other production activities

EDUCATIONAL ATTAINMENT:
B.S. in Electronics and Communications Engineering (BSECE) – Year 1999 to 2004
Technological Institute of the Philippines (TIP), Quiapo, Manila, Philippines
Secondary Education – Year 1995 to 1999
Narvacan National Central Highschool, Narvacan, Ilocos Sur, Philippines
Elementary Education – Year 1989 to 1995
Sacuyya Elementary School, Santa, Ilocos Sur, Philippines

SKILLS:
 Computer Literate – Internet, MS Office (Word, Excel, Powerpoint)
 Knowledgeable in Basic AutoCad, QC Tools, SPC, 5 WHY, FMEA
 Knowledgeable in Preventive Maintenance, Pneumatics System and
Total Productive Maintenance (TPM)
 Knowledgeable in Basic Machine/Equipment Troubleshooting.
 Can operate overhead hoist crane and operated forklifts battery / diesel
 Can work with minimum supervision, flexible, fast learner, team player

SEMINARS AND TRAININGS ATTENDED:

 INJECTION MOLDING PRODUCTION OPERATION (2 months)
Nidec Sankyo Corp., Chino, Nagano, Japan (AUG. 21 – OCT. 20, 2014)
 PNEUMATIC INDUSTRIAL CONTROLS (42 Hours)
MFI Foundation Inc., Manila, Philippines (July 29 to August 5, 2011)
 INDUSTRIAL PROCESS CONTROLS (36 Hours)
MFI Foundation Inc., Manila, Philippines (July 18 to August 4, 2011)
 CALIBRATION FOR PROCESS INSTRUMENTATION (36 Hours)
MFI Foundation Inc., Manila, Philippines (June 27 – July 12, 2011)
 PREVENTIVE MAINTENANCE SYSTEM (21 Hours)
MFI Foundation Inc., Manila, Philippines (June 11-25, 2011)
 INDUSTRIAL ELECTRICIAN (66 Hours)
MFI Foundation Inc., Manila, Philippines (May 23 – June 22, 2011)
 AUTOCAD (72 Hours)
MFI Foundation Inc., Manila, Philippines (May 19 – June 17, 2011)
 TEAMBUILDING SEMINAR
Nikko Metals Philippines Inc. (April 17, 2010)
 SAFE OPERATION OF CRANE (RE-CERTIFICATION)
Nikko Metals Philippines Inc. (November 10, 2008)
 FIRST AID TRAINING
Nikko Metals Philippines Inc. (January 22-24, 2008)
 FORKLIFT OPERATIONS AND SAFETY
Nikko Metals Philippines Inc. (September 26, 2006)

PERSONAL INFORMATION:
Nickname: Jay – Ar
Status: Married
Age: 36
Date of Birth: February 26, 1982
Religion: Roman Catholic
Nationality: Filipino

CHARACTER REFERENCES:

Luisito Solero Eduardo Mercurio Doms Inlong
Nidec Sankyo Phils. Corp. Nidec Sankyo Phils. Corp. Nidec Sankyo Phils. Corp.
Production Manager QA Supervisor Facilities Manager
+639971994682 +639424986688 +639178196843
I hereby certify that the above information is true and correct to the best of my knowledge.

AMANTE B. MANZANO JR.