Amiel Molleno Auto. Mechanic / Auto. Technician
Dasmarinas City, Cavite, PhilippinesFull Name (Amiel, Gallego, Molleno)
Position: Automotive Mechanic / Auto. Technician
Address: Block 18 Lot 04, Brgy. Victoria Reyes, Dasmarinas City, Cavite, Philippines
PROFILE SUMMARY
· Total years of experience – 11 years and 5 months. Total years of experience abroad – 10 years and 2 months.
· Expertise in – Engine performance problem, suspension, brakes, under chassis
· Repairs and Troubleshooting performed – engine performance problem, electrical system, fuel system, periodic maintenance service, brake repairs and parts replacement, suspension repair
· Diagnostic Tools used – TECH2, TECH2 Win, MDI 2 (Multiple Diagnostic Interface), GDS 2(Global Diagnostic System), Fluke meter, Data Bus Diagnostic Tool, Fuel pressure Gauge, Coolant System pressure Test Adapter, AFIT, Engine Compression Tester, TPMS (Tire Pressure Monitoring System), Oscilloscope Diagnostic Kit, Hunter Road force Tire Balancer, Stethoscope, MOST bus Diagnostic Tool, Coaxial Cable Repair Kit, Battery Tester, Fluke Meter (DMM), KJ-38125 GM Terminal Repair Kit, Circuit testers
· Strength – My biggest strengths as a mechanic are my ability to troubleshoot, maintain patience on problem that I encounter, and my willingness to stay up to date on changes in vehicle technology.
· Weakness – I like to make sure that my work is perfect, so I tend to perhaps spend a little too much time checking it. However, I’ve come to a good balance by setting up a system to ensure everything is done correctly the first time.
PROFESSIONAL EXPERIENCE
Date : January 2010 up to March 2018
Position : Auto. Mechanic (Driveability Mechanic)
Company Name : Universal Motors Agencies Co. Ltd.
Location : Al Hassa Hub town branch, Saudi Arabia
Department : Service
Reason for leaving : I am looking for better career prospects, professional growth, and work opportunities.
Company Website : http://en.uma.com.sa/
Duties and Responsibilities (8 yrs. 2 mos.):
Examine vehicles, compile estimates and secure customer approval through service advisor to perform the repairs.
Performed vehicle routine and scheduled maintenance services such as oil changes, lubrications, top-ups, and tune-ups.
Follow service checklists to ensure all important parts are examined including belts, hoses, steering system, brakes system, fuel system, cooling system, wheel bearings, and other potentially troublesome areas.
· Understand and verify the customer concern before performed any repair to the vehicle.
Test and read vehicle components system parameter. Using scan tools such as Tech2, Tech2 Win., MDI/MDI2, and GDS2.
· Diagnose and repair engine performance problems such as engine misfiring, engine hesitation, engine stall, engine not starting, engine noise, and engine DTC’s related problem.
Troubleshoot and repair fuel system, ignition system, and emissions control systems problem.
Diagnose, test, and repair vehicle electrical problem.
· Diagnose, replace, program, and set up different kind of vehicle module or ECU related problem.
· Follow the procedure in the service information or service manual which is appropriate on how to diagnose and repair the fault in the vehicle system.
· Diagnose and repair (SRS) supplemental restraints system wiring or component problem.
· Diagnose and repair brakes system and ABS system problem.
· Refinish or resurface brake rotors and brake drum type with the use of brake lathe machine. Repair and replace brake system components.
· Performed warranty job and documentation.
Performed diagnose, repair or replace engine major components such as engine oil pump, engine valve lifters, rocker arm, camshafts, crankshafts etc.
Diagnose and repair different kind of leak such as engine oil, coolant, brake fluid, water, fuel and transmission oil.
Confer to service advisor to ask the customer to obtain description of vehicle problems and discuss the work that need to be performed.
Review work orders and discuss work with my workshop manager, supervisor and team leader.
Disassemble units and inspect parts for wear, using micrometers, calipers, and gauges.
Clean and maintain the work environment to ensure equipment longevity and workplace safety.
Inspect and test new vehicles for defects and record findings so that necessary repairs can be made.
· Performed wheel balancing of tires using 9700 Hunter Balancer. Change tire sensor and program using Tire Pressure Monitoring System special tool.
· File appropriate documentation on each repair.
· Order vehicle parts to parts department.
· Participate in all GM training programs and keep current of all technical Service Bulletins, Preliminary Information, and Campaigns.
Troubleshooting/Repairs performed:
· Engine misfiring, engine hesitation, engine stall, engine not starting, engine noise, and engine DTC’s related problem.
· Fuel system, ignition system, and emissions control systems problem.
· Engine (DTC) Diagnostic Trouble Code Fault.
Engine minor and major components such as engine oil pump, engine valve lifters, rocker arm, camshafts, crankshafts etc.
Vehicle electrical problem.
Vehicle module or ECU related problem.
· (SRS) supplemental restraints system wiring or component problem.
· Brakes system and ABS system problem.
Leaks such as engine oil, coolant, brake fluid, water leak, fuel, steering oil and transmission oil leak.
· Wheel balancing of tires using 9700 Hunter Balancer. Change tire sensor and program using Tire Pressure Monitoring System special tool.
· Suspension and under chassis problem.
Scan/Diagnostic Tools used:
· Tech2
· MDI/ MDI2 (Multiple Diagnostic Interface)
· GDS/ GDS2 (Global Diagnostic System)
· SI (Service Information)
· TIS2 Web
· Data Bus Diagnostic Tool
· Fuel pressure Gauge
· Coolant System pressure Test Adapter
· AFIT
· Engine Compression Tester
· TPMS (Tire Pressure Monitoring System)
· Oscilloscope Diagnostic Kit
· Hunter Road force Tire Balancer
· Stethoscope
· MOST bus Diagnostic Tool
· Coaxial Cable Repair Kit
· Battery Tester Machine
· Fluke Meter (DMM)
· KJ-38125 GM Terminal Repair Kit
· Circuit testers
Brands and Models of Vehicles serviced:
· GMC Terrain/ Terrain Denali
· GMC Acadia/ Acadia Denali
· GMC Yukon/ Yukon Denali
· GMC Yukon XL/ Yukon XL Denali
· GMC Sierra/ Sierra Denali/ Sierra HD
· Chevrolet Corvette
· Chevrolet Aveo
· Chevrolet Camaro
· Chevrolet Cruze
· Chevrolet Impala
· Chevrolet Malibu
· Chevrolet Spark
· Chevrolet Suburban
· Chevrolet Tahoe
· Chevrolet Traverse
Date : December 2006 up to December 2008
Position : General Mechanic
Company Name : Universal Motors Agencies Co. Ltd.
Location : Dhahran Main Branch, Saudi Arabia
Department : Service
Reason for leaving : I had to leave for temporary due to family reasons which are now resolved.
Company Website : http://en.uma.com.sa/
Duties and Responsibilities (2 yrs.):
Performed routine and scheduled maintenance services such as oil changes, lubrications, top-ups, and tune-ups.
To ensure a vehicle operates at maximum efficiency.
Diagnose and repair brakes system problem such as replace brake pads, adjust parking brakes, and replace brake shoe.
Diagnose and repair suspension noise complain.
Replace suspension components.
Diagnose and repair unusual noise in the engine compartment such as water pump, tensioner, idler, and drive belts.
Provide customer with detailed estimates for repairs replacements.
Test drive the vehicle with the team leader after the repair to verify.
Maintain work shop equipment and tools in good condition.
Troubleshooting/Repairs performed:
· Brakes repair and replace components.
· Suspension and under chassis.
Leaks such as engine oil, coolant, brake fluid, water, fuel, steering oil and transmission oil leak.
· Inner and outer trim panel noise.
· Engine minor noise.
Scan/Diagnostic Tools used:
· Tech 2
· Tech 1
· SI (Service Information)
· TIS Web
· Fuel pressure Gauge
· Coolant System pressure Test Adapter
· AFIT
· Engine Compression Tester
· TPMS (Tire Pressure Monitoring System)
· Hunter Road force Tire Balancer
· Stethoscope
· Fluke Meter
Brands and Models of Vehicles serviced:
· GMC Yukon/ Yukon Denali
· GMC Yukon XL/ Yukon XL Denali
· GMC Sierra/ Sierra Denali/ Sierra HD
· Chevrolet Aveo
· Chevrolet Camaro
· Chevrolet Corvette
· Chevrolet Malibu
· Chevrolet Spark
· Chevrolet Suburban
· Chevrolet Tahoe
Date : January 2006 up to June 2006
Position : Automotive Technician (Apprentice)
Company Name : KIA Motors Iloilo
Location : Tagbac, Jaro, Iloilo City
Department : Service
Reason for leaving : I’ve been offered a permanent position in abroad.
Company Website : https://www.kia.com/ph/main.html
Duties and Responsibilities (5 mos.):
Assist senior mechanic to ensure a vehicle operates at maximum efficiency.
Performed automotive mechanic duties.
Performed routine and scheduled maintenance services.
Wear and maintain personal protective equipment required for safety repair.
Perform simple automotive repairs.
Brakes system problem such as replace brake pads, adjust parking brakes, and replace brake shoe.
Write estimates.
Inspect and test the vehicles.
Test car batteries.
Troubleshooting/Repairs performed:
· Routine and scheduled maintenance service.
· Brakes repair and replace components.
· Suspension and under chassis.
Leaks such as engine oil, coolant, brake fluid, water, fuel, steering oil and transmission oil.
· Inner and outer trim panel.
Scan/Diagnostic Tools used:
· G Scan
Brands and Models of Vehicles serviced:
· Sorento
· Picanto
· KIA Pride
· Sportage
· Carnival
· Rio
Date : April 2005 up to December 2005
Position : General Mechanic (Apprentice)
Company Name : Toyota Iloilo Inc.
Location : Gran Plains Highway, Jaro, Iloilo City
Department : Service
Reason for leaving : I’m looking for a new challenge.
Company Website : http://www.toyota.com.ph/
Duties and Responsibilities (8 mos.):
Performed routine and scheduled maintenance.
Learn Repair Techniques.
Helped in the inspection of automobiles and the diagnosis of problems.
Participated in on-the-job training and maintained records.
Familiarize the workshop equipment and tools.
Troubleshooting/Repairs performed:
· Routine and scheduled maintenance service.
· Assist in brakes repair and replace components.
· Assist mechanic for suspension and under chassis repair.
Helped senior mechanic to diagnose and repair leaks such as engine oil, coolant, brake fluid, water, fuel, steering oil and transmission oil.
Brands and Models of Vehicles serviced:
· Innova
· Vios
· Tamaraw FX
· Camry
· Corolla Altis
· Land Cruiser
· Prado
· Fortuner
· Rav4
· Hiace
· Hilux
TRAININGS AND SHORT COURSES
Course : 2015 GM Dealer Technician Skills Competition
Training Center : Dubai, Autodrome
Location : Dubai, UAE
Date : November 9, 2015 – November 10, 2015
Course : 1.6L and 1.8L Engine Timing Procedure
Training Center : Web Base Training
Location : Saudi Arabia
Date : 18/5/2012
Course : Automatic Transaxles
Training Center : Web Base Training
Location : Saudi Arabia
Date : 20/7/2010
Course : Active Fuel Injector Tester
Training Center : UMA Otomoto Branch
Location : Saudi Arabia
Date : August 19, 2010 – August 20, 2010
Course : Automotive Testers
Training Center : UMA Otomoto Branch
Location : Saudi Arabia
Date : August 16, 2010 – August 17, 2010
Course : Delphi Micro 64 Connector System Service
Training Center : UMA Otomoto Branch
Location : Saudi Arabia
Date : August 03, 2008 – August 04, 2008
Course : Tech 2
Training Center : UMA Otomoto Branch
Location : Saudi Arabia
Date : June 25, 2008 – June 26, 2008
Course : ESI and Sources of Information
Training Center : UMA Otomoto Branch
Location : Saudi Arabia
Date : April 13, 2008 – April 14, 2008
Course : Intro to Base Brakes and ABS
Training Center : UMA Otomoto Branch
Location : Saudi Arabia
Date : December 04, 2006 – December 06, 2006
Course : GM Difference Customer Enthusiasm
Training Center : UMA Otomoto Branch
Location : Saudi Arabia
Date : January 1, 2007
Course : Charging System Theory
Training Center : Web Base Training
Location : Saudi Arabia
Date : 05/10/2010
Course : GM Chassis Control Systems
Training Center : Web Base Training
Location : Saudi Arabia
Date : 07/06/2010
Course : GM Powertrain Performance 4
Training Center : Web Base Training
Location : Saudi Arabia
Date : 18/05/2010
Course : GM Supplemental Restraint Systems
Training Center : Web Base Training
Location : Saudi Arabia
Date : 10/05/2010
Course : GM Steering Systems and Diagnostics
Training Center : Web Base Training
Location : Saudi Arabia
Date : 02/09/2010
Course : Ignition System Fundamentals
Training Center : Web Base Training
Location : Saudi Arabia
Date : 10/08/2010
Course : Maintenance-Automotive Fluids
Training Center : Web Base Training
Location : Saudi Arabia
Date : 16/08/2010
Course : Battery Theory
Training Center : Web Base Training
Location : Saudi Arabia
Date : 27/4/2017
Course : Battery, Charging and Starting Systems
Training Center : Web Base Training
Location : Saudi Arabia
Date : 27/4/2017
Course : Brake Drum Measurement
Training Center : Web Base Training
Location : Saudi Arabia
Date : 13/6/2010
Course : Chevrolet ICARE
Training Center : Web Base Training
Location : Saudi Arabia
Date : 27/11/2016
Course : Computer System Fundamentals
Training Center : Web Base Training
Location : Saudi Arabia
Date : 30/9/2010
Course : Continuous Damping Control System
Training Center : Web Base Training
Location : Saudi Arabia
Date : 19/8/2010
Course : Digital Multi Meter (DMM) Review
Training Center : Web Base Training
Location : Saudi Arabia
Date : 24/3/2017
Course : Duramax 6600: Diesel Engine Performance
Training Center : Web Base Training
Location : Saudi Arabia
Date : 12/7/2010
Course : Ecotech Timing Chain Retention Tool
Training Center : Web Base Training
Location : Saudi Arabia
Date : 18/5/2012
Course : Electrical Circuits
Training Center : Web Base Training
Location : Saudi Arabia
Date : 16/10/2010
Course : Electrical Components
Training Center : Web Base Training
Location : Saudi Arabia
Date : 25/3/2017
Course : Electrical Schematics
Training Center : Web Base Training
Location : Saudi Arabia
Date : 13/10/2010
Course : Electronic Suspension Systems
Training Center : Web Base Training
Location : Saudi Arabia
Date : 13/6/2010
Course : Engine Fundamentals
Training Center : Web Base Training
Location : Saudi Arabia
Date : 27/4/2017
Course : Engine Mechanical Diagnosis & Measurement
Training Center : Web Base Training
Location : Saudi Arabia
Date : 14/6/2010
Course : Global Diagnostic System (GDS) 2 / MDI
Training Center : Web Base Training
Location : Saudi Arabia
Date : 4/4/2012
Course : GM Approved Procedures for Wire Repair
Training Center : Web Base Training
Location : Saudi Arabia
Date : 24/3/2017
Course : OBD II
Training Center : Web Base Training
Location : Saudi Arabia
Date : 19/6/2010
Course : Precision Measuring Tools
Training Center : Web Base Training
Location : Saudi Arabia
Date : 9/8/2010
Course : Rack-mount Electric Steering
Training Center : Web Base Training
Location : Saudi Arabia
Date : 21/8/2010
Course : Rear Axle and Propeller Shaft
Training Center : Web Base Training
Location : Saudi Arabia
Date : 19/8/2010
Course : Service Information (SI) Overview
Training Center : Web Base Training
Location : Saudi Arabia
Date : 27/4/2017
Course : Short Circuit Wire Repair
Training Center : Web Base Training
Location : Saudi Arabia
Date : 24/3/2017
Course : Starting System Theory
Training Center : Web Base Training
Location : Saudi Arabia
Date : 6/10/2010
Course : Steering System Operation
Training Center : Web Base Training
Location : Saudi Arabia
Date : 19/9/2010
Course : Suspension System Operation
Training Center : Web Base Training
Location : Saudi Arabia
Date : 20/9/2010
Course : Tech 2 Familiarization
Training Center : Web Base Training
Location : Saudi Arabia
Date : 26/3/2012
Course : Tech2Win
Training Center : Web Base Training
Location : Saudi Arabia
Date : 14/1/2015
Course : TIS2WEB WBT
Training Center : Web Base Training
Location : Saudi Arabia
Date : 26/4/2017
Course : Base Suspension
Training Center : Web Base Training
Location : Saudi Arabia
Date : 1/8/2010
Course : Tires and Wheels
Training Center : Web Base Training
Location : Saudi Arabia
Date : 8/8/2010
Course : Waterleak & Windnoise Management
Training Center : Web Base Training
Location : Saudi Arabia
Date : 6/5/2010
Course : Wheel Alignment
Training Center : Web Base Training
Location : Saudi Arabia
Date : 20/9/2010
AWARDS AND ACHIEVEMENTS
1. 2015 Dealer Technician Skills Competition Candidate: I receive certificate of recognition and gold bar award.
2. Fix It Right the First Time Web Test 100% Award Winner 2011: I receive 500 Saudi Riyal for the award.
EDUCATIONAL BACKGROUND
Inclusive Date : October 2004 up to October 2005
Course : Automotive Mechanics – Light Duty
Vocational School : Western Visayas College of Science and Technology
Location : Lapaz, Iloilo City
Inclusive Date : June 2001 up to March 2004
Course : Diploma in Information Technology
College School : System Technology Institute Iloilo
Location : Iloilo City
Inclusive Date : June 1995 up to March 2000
High School : Dasmarinas East National High School Annex-C
Location : San Simon, Dasmarinas, Cavite
PERSONAL DATA
Full Name (First, Middle, Last) : Amiel, Gallego, Molleno
Nickname : Mel
Date of Birth : May 01, 1982
Place of Birth : Lapaz, Iloilo City
Height : 171 cm
Weight : 76 kilos
Religion : Christian
Languages Spoken : English, Tagalog, Hiligaynon, Arabic
Citizenship : Filipino
Marital Status : Marriage
Spouse’s Name : Maria V. Molleno
Children’s Name/Age : Mariel V. Molleno/ 11
Cell Number : +639958322364
Landline Number : None
Email : [email protected]
Skype ID : Amiel Molleno
Facebook Name/Email : https://www.facebook.com/blaupunkt29/ [email protected]
Passport Number : P7601450A
Expiry Date : June 19, 2028
Address
Current : Block 18 Lot 04, Brgy. Victoria Reyes
Home : Dasmarinas City
Provincial : Cavite
In case of Emergency
Contact Name : Maria V. Molleno
Relationship : Spouse
Contact No. : +639565986387
CHARACTER REFERENCES
Name : Tareq Othman
Position : Workshop Manager
Company : Universal Motors Agencies Co. Ltd.
Contact : +966135931345/ [email protected]
Relationship : Colleague,
Name : Herbert Tuarez
Position : Control Tower Administrator
Company : Universal Motors Agencies Co. Ltd.
Contact : +966532424795/ [email protected]
Relationship : Colleague