Qualifications

Summary
Accomplished and passionate professional with 15 years substantial experience managing, monitoring, and performing installation, testing and commissioning activities for diverse range of electrical operations. Strong background in designing, developing, and spearheading equipment that used to monitor and control engineering systems, machinery, and processes. Demonstrated ability to coordinate and deliver projects from inception to success by prioritizing tasks and meeting strict deadlines. Strong Electrical System, Control System, PLC/HMI/SCADA programming and instrumentation aptitude.

Capacity to develop Electrical Design including Single-line Diagrams(MV/LV), Breaker and Cable Sizing Report, Lighting Calculation, Earthing and Lightning Calculation, Lighting and Small power layout and load distribution design(MDB, SMDB, DB, LDB, UDB, Feeder Pillar),Three line diagram for MV Substation and LV Switchgear Panels, HVAC Control Panel, Motor Control Panel, Power Factor Correction Panel.

Capacity to develop controls/instrumentation engineering documentation, including detailed instrument specifications and selection, PLC logic diagrams, Control loop diagrams, instrument lists, I/O lists, and Piping and Instrumentation diagrams (P&ID) drawings.

Expert in managing operations, maintenance and projects’ pre-commissioning, commissioning, and hand-over activities. Instrumental in supporting the preparation and review of functional and design specifications, engineering standards, PMs, SOPs, commissioning protocols, acceptance test plans, and IQ/OQs. Proven expertise in:

·   Strategic Planning & Analysis

·   Testing & Commissioning Activities

·   Electrical Systems (MV/LV) Design

·   PLC Programming & AutoCAD Designing

·   Quality Assurance

·   Health & Safety Management
·   Full Life Cycle Electrical/Electronic Operations

·   Instrumentation Control & Automation

·   Issue & Conflict Resolution

·   Power Generation & Distribution

·   Resource Management & Planning

·   Staff Training & Leadership

Career

Experience
1. Leighton Contracting (Qatar) WLL

EICA Engineer, Oct 2015 to Present

Project 1: GTC760/2015 Mekaines Reservoir & Pumping Station project (Kahramaa)

Project2: Hyatt Centric Samariya Tower (35 Stored), Doha

Duration: Aug 2017 to Present

Manage and monitor Design, installation, testing and commissioning activities of diverse range of electrical operations, including 2X1.6MVA substations and motor control center (MCC-1 & MCC-2), VFD Siemens SINAMICS G150, main pumps and TFS pumps motors SIMOTICS FD and LE, all electrical panels/distribution boards connection (SMSB, DB, UDB, HVAC CP, SMSB-MOV, Feeder Pillar), lighting system LED indoor and solar LED outdoor, small power, and motorized actuators modulating and on/off types. Involve in supervision of installation, testing and commissioning activities of numerous electrical systems, such as earthing and lightning protection, 40KVA/30KVA UPS, fire alarm, fire suppressor (FM 200), CCTV and Security, IT and Telephone, PLC (Siemens S7 400, S7 1200 and S7 1500) & SCADA (WinCC) System marshalling panels/control desk, Temperature and Vibration Monitoring System, Wall Mounted Control Panel, Video Wall, Remote Terminal Unit to NWCC, field instruments (Electromagnetic district flowmeter, magnetic level gauge, guided wave, radar level transmitter, ultrasonic level transmitter, level switches (float, FLVS, magnetic, displacer) pressure switches, pressure transmitter), water quality analyzer, chlorination system MCC,PLC and instruments, surge protection system control equipment and local PLC, and emergency tanker filling station control with PLC and local control panel.

Key Contributions:

Designed and installed EICA (power, instrumentation, control and automation) and ELV (CAT 6A, fiber optic multi-mode and single mode, FP200) cable routine for underground and above ground cable duct, trench, ladder, tray, GI conduit, and PVC conduit.
Created and oversaw all EICA material submittals, including method of statements and installation and testing plan.
Ensured compliance with set standards by reviewing all EICA detailed design drawings, IFC drawings, and design reports and calculations.
Formulated and critically reviewed EICA shop drawings as per specifications, codes, and standards and submitted to consultant and Kahramaa.
Executed project with greater quality by closely monitoring operational activities, interacting with consultants, resolving all on-site and contractual problems, and conducting the initial tests and inspections for the electrical items.
Reduced operational costs by leading all purchasing operations of the electrical materials.
Project 3: PS70, PS34, PS37 & LUSAIL SW4 Ashghal Pumping Station Operation & Maintenance,               Duration: Oct 2015 to Aug 2017

Performed as operation lead for PS70, PS34, PS37, and Lusail PS SW4 (Sewage Pumping Stations) and maintenance in charge for PS34, PS37, and Lusail PS SW4. Involved in troubleshooting of Siemens S7 300, Siemens S7 414-4H PLC, and WinCC SCADA Systems. Spearheaded overall operation, maintenance and troubleshooting of lifting station (LPS) and associated 11/3.3 KV Switchgear, 3.3kV/740kW motors and Forwarding (FPS) and associated 3.3kV/840kW motors, 3.3kV medium voltage VFD (Siemens perfect harmony drive) with its software Tool suite, 3.3kV medium voltage soft starter (Mocotec)/LV soft starter, 4x2000MW generator set, LV switchgears/distribution systems, UPS/DC systems, odor control systems, motorized actuator valves, and penstocks.

Key Contributions:

Managed overall maintenance, troubleshooting and calibration operations of plant instruments, such as level transmitter, ultrasonic and hydrostatic, H2S analyzer, pH probe meter, ORP probe and meter, pressure transmitter, electromagnetic flow meter, ultrasonic flow meter and level switches.
Conducted regular maintenance, troubleshooting, and analysis of workstation- Analogue and digital parameters, real time trends, historical trends, and reporting, PLC Hardware (Siemens S7 400, CPU, CP, IOs, PS), PLC Software (Simatic S7 manager & WinCC) system network (Foundation fieldbus, Modbus RTU, Modbus TCP/IP, Profinet, Profibus, Industrial Ethernet), Firewall, NTP time server, RTU etc.
Led execution of maintenance activities for monthly, quarterly and annual as per manufacturer recommendation (PMs).
2.    Wärtsilä Finland Oy, Vaasa, Finland/ Assigned in Petrodar Operating Company (Oil and Gas), Sudan

EICA Engineer, Oct 2013 to May 2015

Identified and resolved faults of Wartsila HFO/diesel engine (W12V32) basic engine automation, VIKING 25 engine speed regulator/fuel governor, and speed monitoring system DESPEMES. Utilized calibration tools, hardware, and software for troubleshooting and calibrating different kind of automation system instruments, switches and transducers of measuring and switching parameters, level sensors (ultrasonic and pressure element type), level switch (conductive, capacitive fork type) temperature (PT-100 and thermocouples) pressure transmitter, and vibration sensor.

Key Contributions:

Displayed exceptional electrical expertise in troubleshooting faults of PLC system (Schneider electric- modicon and Siemens), CPU, interfacing, and analogue and digital input-output monitoring cards.
Performed troubleshooting faults and executed maintenance operations of auxiliaries, such as start air compressor unit, instrument air compressor and dryer unit, Westfalia OSC30 and OSD6 (CRO & LO) separators, fuel booster and feeder unit, water treatment unit, fuel pump motors, pre-lube pump motors, pre heat pump motors, charge air filter motor, fire pump, Nitrogen generator and water cooling radiator motors.
Oversaw and headed pump station electrical maintenance and plant operation activities.
Executed all maintenance and management operations with greater integrity and quality.
Prepared daily maintenance, weekly monitoring, monthly, monthly QEHS, incident, and failure reports as per Wartsila standard procedure.
Additional Experience

EICA Engineer at Wärtsilä Eastern Africa Limited, Paloch Power Plant(33/11KV), DAR Petroleum Operating Company (Oil and Gas), South Sudan, June 2015 to Oct 2015- Operation and Maintenance.

Adviser/Sr. Engineer, EICA | Engineer, EICA | Assistant Engineer, EICA at Wärtsilä Bangladesh Ltd, Aug 2007 to Sep 2013- Diesel, HFO, CRUDE Oil and Gas Engine Based Power Plants, Operation and Maint.

EICA Supervisor at Ebara Corporation, Japan Assigned in GKI Irrigation Pumping Station Project, Nov 2006 to July 2007- Site Supervision/Lighting and Small Power Distribution Design

Design Engineer, Electrical at Corona International, Dhaka assigned in Jamuna Future Park Project, Jan 2006 to Nov 2006- Design 11/0.415 KV Substations, Distribution System with Busbar Trunking System.

Site Engineer at ABB India assigned in Lafarge Surma Cement Project, June 2005 to Dec 2005