Photo

Carlito Calma Jr. Welder

Dubai UAE
Welder and machinist

Carlito A. Calma Jr.

228 San Guillermo St. Putatan Muntinlupa City Manila, Philippines

Dubai contact #: +971 54 552 7903

 

PROFILE:

A hard working and resourceful person, with more than 5 years of solid hands on experience. In the mass production environment. Developed multiple skills thru various assignments and project with satisfactory results. Seeking to be a part of a highly regarded company and future develop my career in the field of manufacturing.

 

WORK EXPERIENCES:

FTV PROCLAD DUBAI BRANCH L.L.C

July 3, 2016 Up to PRESENT

POSITION:       WELDER GTAW, SMAW & GMAW

Job description:

Preparing Argon shield Gas for Forging of pipe routing inside, Routing TIG and Filling Capping SMAW.
Qualified for Site Welder Abu Dhabi ADNoc & Oman PDO Oil and Gas project.

FTV PROCLAD DUBAI BRANCH L.L.C

POSITION: Cladding Pipe Horrizontal and Vertical Machine

Job description:

Set up the pipe dialing on drum Rotating, check the level of pipe, setting the machines on computer, setting wire of torch. Set up the torch inside the pipe then Start the cladding of pipe.

FTV PROCLAD DUBAI BRANCH

POSITION:  Hydro test Machine Operator

Job description;

checklist of the machine if Good Condition, handling the pipes, set up the machine program in computer, check the sizes of pipe, Operating the Cycle start of Hydro test in 450 Bar high pressure.  Then Unload.

FTV PROCLAD DUBAI BRANCH L.L.C

POSITION: FITTER MACHINIST

Job description:

Lathe machine and Boring machine, Beveling of pipes and Boring

AL HASSAN CONTRACTIONS & GS COMPANY

UNDER OF ADCO ( ABU DHABI)

POSITION:  SUPPLY WELDER GTAW & SMAW

December 3, 2016 to March 3, 2017

Job Description:

Pipe Routing & 3 Hot pass (GTAW)
Filling & Capping (SMAW)

AL TURKEY ENGR. COMPANY UNDER OF PDO (OMAN)

POSITION: SUPPLY WELDER GTAW & SMAW

June 17, 2017 to October 4, 2017

Job Description:

Pipe Routing & 3 Hot pass (GTAW)
Filling & Capping (SMAW)
ARABIAN CONSTRUCTION COMPANY UNDER OF TECHNIMONT ENGR. COMPANY UNDER ADCO(ABU DHABI)

POSITION: SUPPLY WELDER GTAW & SMAW

February 1, 2018 to October 15, 2018

Job Description:

Pipe Routing & 3 Hot pass (GTAW)
Filling & Capping (SMAW)

KAWASAKI MOTORS PHILLIPPINES. CORP.                         December 1, 2015-May 5,2016

 

POSITION:        WELDER SMAW-GMAW

Job description:

• Fit up accessories and full weld all around motor frames.

• Ensure products is of an acceptable quality and in according and specifications .

• Should contribute to various products exhibits and prototype by way of fabrication .

• Promotes self improvement and continues improvement.

• Should render Overtime in accordance with  production needs.

• Maintain harmonious relationships between co-worker and superior.

• Ensure that the values stated in the mission and vision and core values are being internalized.

• Ensuring the wearing PPE’s is observe all the times.

 

WEBFORGE PHILLIPPINES.CORP.                                          October 14, 2013 – November 15, 2015

 

POSITION:        FITTER MACHINIST

 

Job description:

• Perform production related work as requested by the shift leader

• Maintain, repair and calibrate precision measuring instruments, uses gauges, calipers, micrometers to measure work

• Works with all metallic and non-metallic materials

• Maintain work area to the highest housekeeping standards

• Compute dimensions and tolerances and measure and lay out workpiece

• Complete log books for each job, at each workstation

• Verify dimensions of machined parts using precision measuring instruments

• Performs daily and regular cleaning and light maintenance tasks on machinery and equipment

• Performs all tasks in a safe and responsible manner

• Fabricates and shapes parts such as tools and machine parts out of metal, plastics and composites  Properly and safely selects, aligns, secures and removes holding fixtures, cutting tools, attachments, accessories and materials onto machines

• Recognizes, deploys and properly uses inserts, fixtures and tooling

• Uses precision tools, machinery and equipment such as lathe, vertical milling machine, drill press, hydraulic press, chop saw, band saw, push and pull broaches and a variety of cutting tools and equipment  Reads and interprets blueprints.

 

WEBFORGE PHILLIPPINES CORP.                                     May 4 2010 – October 15, 2013

 

POSITION:           WELDER FABRICATOR ( SMAW/GMAW/GTAW)

 

Job description:

• Fabricate Stringer using channel, Layout , cutting, assemble with degree slope , drilling Holes inside of channel for stair threads ladder and fabricate all support of stringer.

• Fabricate handrails Landing and wall type handrails

• Fabricate flange flat form

• Bending Pipes and Pipe fitter

• Fabricate Industrial flooring, Gates, structural , Fences

 

 

OTHERS EXPERIENCES/SKILLS AND MACHINES OPERATING

• PUNCH AND SHEAR

• BENDING MACHINES

• FORGE WELDING MACHINES

• SERRATION MACHINE

• LATHE MACINE

• AUTOMATIC BENDING MACHINES

• MILLING MACHINES

• DRILLING MACHINES

 

 

EDUCATION IN DON BOSCO TECHNICAL INSTITUTE COLLEGE MAKATI

 

• Good mathematical aptitude and knowledge of measuring Instruments such a tape measure, caliper and micrometer etc.

• Profit sharing savings plan

• Make and modify parts and assemble applying knowledge of mechanics , mathematics, Layout and machining procedures.

• Manual and machining on mills and lathes.

• Works and little supervision

• Provides leadership on a temporary basics due to absence of person/fore person

• Independently perform machine shop set upend operation manual

• Gauge and validate work through the use of measuring device including

• Responsible for completing assemble/ disassemble maintenance

 

 

 

 

 

 

 

▪ Carlito A. Calma Jr.

Education

June 10, 2009 to October 2010 Machinist and welder at Don Bosco Technical Institute Makati Manila Philippine