Dante Boie Ong
Address: No. 22 Zinnia Street Anastacia Village Nangka, Marikina City, Philippines 1800

E-mail : [email protected]

Mobile No. :   +639289340504 (Philippines)

+2348150682683 (Nigeria)

Phone No. : +63 (02) 875-8892 (Philippines)
Date of Birth: September 25, 1969
Education
1987-1992     Mapua Institute of Technology

Muralla Street, Manila, Philippines

Bachelor of Science in Civil Engineering

Gov’t Exam Taken
Board of Civil Engineering, November 1992                        Philippines – Passed

Work Experience & Job Description
DAG INDUSTRIES NIGERIA LIMITED

11 Sapara Williams Street. Ikeja Industrial Estate, Isolo, Lagos, Nigeria

Project Manager

(October 28, 2017 – Present)

Project: Proposed Factory Remodeling and Improvement

1.      Plan and coordinate all aspects of the construction process, including hiring contractors and working with engineers, architects and vendors

2.      Determining the scheduling of different phases of a project based on established deadlines.

3.      Assist in negotiating contracts with designing consultant, project management company and construction contractors.

4.      Coordinating with consultants on securing of building permits and licenses.

5.      Confer with project management group and construction contractors to monitor construction progress, including worker productivity and compliance with building and safety codes.

6.      Resolving problems that will arise due to any issues which may cause delays.

SEOBON CONSTRUCTION COMPANY, LTD.

P.O. Box 132476, Abu Dhabi, U.A.E.

QA/QC Engineer

(February 01, 2016 – October 26, 2017)

Client:  Hyundai Engineering and Construction Co.

Project: Barakah Nuclear Power Plant Units 1,2,3&4

1.     Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works.

2.     Carry out inspection and checking for all quality related procedures in the site and ensures activity at site are as per approved method statement and inspection test plan.

3.     Coordinate with the Consultant’s representative and Site In-charge for inspection and meeting about quality problems including closure of Non-Compliance Report.

4.     Report to the QA/QC Manager, control and monitor all activities related to Quality Management System, QMS.

5.     Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/ observations, permanent materials delivered and other QA/QC documents.  Responsible for closure of Non-conformance, NCR and Site Instruction, SI.

6.     Responsible in the quality and workmanship of every activities, thorough knowledge of all phases of engineering construction related to Civil, Architectural and Structural discipline interfacing the multi-disciplinary operations.

7.     Develop Work Method of Statement for the activity including risk assessment and job hazard analysis and Inspection Test Plan and checklist based on the specifications of the project.

8.     Carry out Internal Audit at site as scheduled in the Project Quality Plan, PQP.

9.     Coordinate with the Technical Engineer for submission of material submittals to Consultant.

SHIMIZU PHILIPPINES CONTRACTORS, INC.

5F King’s Court Bldg. 1, 2129 Chino Roces Ave, Makati City Philippines

Construction Manager

(September 05, 2015 – January 31, 2016)

Client:  Epson Precision (Philippines) Incorporated

Project: Construction of Epson Philippines Factory 3

1.     Schedule the project in logical steps and budget time required to meet deadlines.

2.     Determine labor requirements and dispatch workers to construction sites.

3.     Inspect and review projects to monitor compliance with building and safety codes, and other regulations.

4.     Direct and supervise workers.

5.     Study job specifications to determine appropriate construction methods.

6.     Requisition supplies and materials to complete construction projects.

7.     Develop and implement quality control programs.

8.     Take actions to deal with the results of delays, bad weather, or emergencies at construction site.

9.     Confer with supervisory personnel, owners, contractors, and design professionals to discuss and resolve matters such as work procedures, complaints, and construction problems.

10.  Plan, organize, and direct activities concerned with the construction and maintenance of structures, facilities, and systems.

11.  Evaluate construction methods and determine cost-effectiveness of plans, using computers.

MERALCO Industrial Engineering Services Corporation (MIESCOR)

5/F Renaissance Tower 1000 Meralco Avenue

Pasig City, Philippines

Construction Manager

(October 19, 2014 – September 05, 2015)

Client: National Grid Corporation of the Philippines

Project: Erection and Construction of Malita – Matanao 230KV Transmission Line and Substation Project

1.     Schedule the project in logical steps and budget time required to meet deadlines.

2.     Determine labor requirements and dispatch workers to construction sites.

3.     Inspect and review projects to monitor compliance with building and safety codes, and other regulations.

4.     Interpret and explain plans and contract terms to administrative staff, workers, and clients, representing the owner or developer.

5.     Prepare contracts and negotiate revisions, changes and additions to contractual agreements with architects, consultants, clients, suppliers and subcontractors.

6.     Obtain all necessary permits and licenses.

7.     Direct and supervise workers.

8.     Study job specifications to determine appropriate construction methods.

9.     Requisition supplies and materials to complete construction projects.

10.  Prepare and submit budget estimates and progress and cost tracking reports.

11.  Develop and implement quality control programs.

12.  Take actions to deal with the results of delays, bad weather, or emergencies at construction site.

13.  Confer with supervisory personnel, owners, contractors, and design professionals to discuss and resolve matters such as work procedures, complaints, and construction problems.

14.  Plan, organize, and direct activities concerned with the construction and maintenance of structures, facilities, and systems.

15.  Evaluate construction methods and determine cost-effectiveness of plans, using computers.

CHURCHGATE GROUP NIGERIA

Churchgate Tower Plot PC 30 Churchgate Street Victoria Island, Lagos, Nigeria

Project Superintendent

(June 12, 2013 – July 07, 2014)

Project: Vineyard Design Limited (Dideolu Project)

(5-Storey building with swimming pool and gymnasium at Roof deck + car park at ground floor).

1.   Review the job schedule and cost breakdown, resolving all differences of opinion with Project Manager at the beginning of the job.

2.   Creating short-interval look-ahead project schedules that make sure that upcoming events are communicated tracked and is being proactively attended to.

3.   Maintain a high standard of quality control at all times.

4.   Conducting and/or attending pre-construction, progress and other project and staff meetings

5.   Analyzes problems and makes sound decisions in a timely manner based on objectives, risks, implications and costs.

6.   Promotes job site safety, encourages safe work practices and rectifies job site hazards immediately.

MEGAWIDE CONSTRUCTION CORPORATION

#20 N. Domingo St. Brgy. Valencia, Quezon City, Philippines

Field Engineer

(September 24, 2012 – February 23, 2013)

Client:  Daiichi Properties and Development, Inc.

Project: One World Place (LEED Building)

(32-Storey Office Building w/4 Basement level + Penthouse + Mechanical Roof Deck)

1.   Supervise construction activities and ensures timely completion of project and within budgetary guidelines.

2.   Coordinate with the Logistic Division the purchase and delivery of required materials for the completion of a specified project and ensure that supplies of material required are maintained to avoid disruption of work.

3.   Prepares and submit necessary documents and reports required by the management.

4.   Analyzes problems and makes sound decisions in a timely manner based on objectives, risks, implications and costs.

5.   Recommends changes in construction procedures that would entail cost savings.

6.   Perform other duties as may be required by the superiors/ management from time to time.

KETTANEH CONSTRUCTION EMIRATES

P.O. Box 114337 Abu Dhabi, UAE

Site Engineer

(May 12, 2011 – May 10, 2012)

Client: Chicago Bridge & Iron (CB&I)

Project: Ruwais Refinery Expansion Project (Propylene Storage Tanks)

1.     Setting out the works in accordance with the drawings and specification.

2.     Checking materials and work in progress for compliance with the specified requirements.

3.   Applying Permit to Work for certain activities.

4.   Preparing and submitting RFI to the client prior to start of some activities.

5.   Supervise all civil/structural works on site and to assure that all works are in conformance with the issued plans and specifications by the Client/Consultant.

6.   Prepare Project Daily Accomplishment Report for submission to the Client.

7.   Resolving technical issues with the Client’s representatives, suppliers, subcontractors and statutory authorities.

8.   Coordinate with the Client before and during actual works.

DAMAC GROUP OF COMPANIES

Draieh Contracting LLC

P.O. Box 5113 Doha, Qatar

Civil Engineer / Project Engineer

(May 12, 2008 – January 05, 2011)

Client: Japan Gas Corporation

Project: Shell Pearl GTL Plant

1.     Project planning which includes the preparation of the schedule of works and material, tools, equipment and manpower resourcing.

2.     Preparation of estimates of all required tools, materials, equipment including manpower prior to the start of works on site.

3.     Preparation of Method of Statements for all works which deem necessary for Client/Consultant approval and applying for Permit to Work.

4.     Preparing and submitting RFI to the client prior to start of some activities.

5.     Applying Permit to Work for certain activities.

6.     Supervise all civil/structural works on site and to assure that all works are in conformance with the issued plans and specifications by the Client/Consultant.

7.     Conducts coordination meetings, if necessary, with other engineering disciplines.

8.     Prepares Project Daily Accomplishment Report for submission to the Client/Consultant.

9.     Sourcing-out and purchasing of all needed materials, tools and equipment for the timely completion of the projects.

10.  Implementing the Project Quality plan both at site and office to the satisfaction of Client/Consultant.

11.  Maintaining logs of all incoming and outgoing correspondence.

12.  Maintaining a file of all hard and soft copies of all drawing received from Consultant or Sub-contractors and all drawings submitted to the Client.

FORTUNE TOBACCO CORPORATION

Fortune Avenue Brgy. Fortune, Marikina City, Philippines

Civil Works Supervisor/Safety Officer

(October 16, 1993-May 15, 2008)

1.    Check the design, plans, and layout done by the Designer and Draftsman.

2.     Prepare Specification, Bill of Materials, Scope of Works and General Condition of Works for Purchase Requisition or other purposes as may be required.

3.     Supervise projects, check and audit completed work to ensure compliance with the specifications, economic, and safety standards.

4.     Conduct research and development work if the assigned workplace/project so requires.

5.     Coordinate and monitor the implementation of costing of finished old/new projects.

6.     Prepare daily accomplishment report.

7.     Interpret and evaluate engineering plans and drawings.

8.     Assess and approve the percentage of accomplishment for every project.

9.     Prepare the Project Certification of accomplished projects.

10.   Coordinate with the Contractor before and during actual works.

11.  Supervise the fabrication shop (welding, carpentry and painting works).

12.  Maintaining all the building structure on the factory plant.

13.  Attend monthly meeting of Central Health and Safety Committee.

14.  Identify various work hazards and initiate effective control measures in order to prevent incidents from occurring.

Project Accomplishment
1.     Three (3) hectares warehouses (combination of concrete and steel) with high retaining walls along perimeter fence and three-storey steel structures with helipad.

2.     Five-storey steel tower for Dry Ice Expanded Tobacco plant of Fortune Tobacco Corporation.

3.     Wastewater Treatment Plant of Fortune Tobacco Corporation and Lapu-lapu Printing Corporation.

4.     Two-storey Residential houses.

5.     Renovation of dormitory building of Fortune Tobacco Corporation Plant B.

6.     Site preparation and fencing works for various JGC-KBR materials laydown area.

7.     Hazardous Materials Storage Area for Japan Gas Company.

8.     Chemicals and Hazardous Storage Area for Ras Laffan Olefin Company.

9.     Telecom cable pulling pits and valve boxes for Ras Laffan Olefin Company.

10.  Three (3) units Propylene Storage Tanks for Ruwais Expansion Project.

11. VDL Building (5-Storey building with swimming pool and gymnasium at roof deck + car park at ground floor).

12. Malita – Matanao 230KV Transmission Line, Davao City

Seminars and Training Attended
1.     Seminar/Workshop on Construction Monitoring and Costs Control – 1994

2.     National Convention (PICE) – 1994, 1995, 1997, 1998, 2000, 2002, 2004, 2006

3.     PHILCONSTRUCT – 1996, 2001, 2002, 2003, 2005, 2006

4.     Fundamentals of Maintenance – 1997

5.     Theoretical and Actual Welding Course – 1999

6.     Basic Occupational Safety and Health – 2002, 2005

7.     Supervisory Effectiveness Training Program – 2002

8.     Computer-Aided Construction Project Management – 2007

9.     Hand Safety & Manual Handling CBT Course – 2009

10.  Emergency Response  CBT Course – 2009

11.  Working at Height CBT Course – 2009

12.  Confined Space Entry CBT Course – 2009

13.  Non-Destructive Examination CBT Course- 2009

14.  Hydrogen Sulphide Awareness CBT Course – 2009

15.  Lifting and Rigging Awareness CBT Course – 2009

16.  Defensive Driving Refresher CBT Course – 2009

17.  Productivity Through Planning & Organising – 2009

18.  The Leadership and Supervisor Training Programme- 2010

19.  Hazardous Material Management Training – 2010

20.  Train the Trainer – 2010

21.  Incident and Injury Free Supervisor Skills – 2010

22.  Quality Control – 2010

23.  Practical Leadership – 2010

24.  Mobile Crane Safety General Training – 2011

Special Skills

Estimating, drafting and proficient in MS Office (Word, Excel and Powerpoint), knowledge in Primavera Project Planner (P3) and Internet.

Languag

Tagalog, English and Chinese

References
(Available upon request)

I hereby certify that the information given above is true and correct.

ENGR. DANTE B. ONG