Domingo A. Soriano
Bucao, Manaoag, Pangasinan.
C.P.09324816935
2430 Philippines.
E-mail: [email protected]

Dear Sir/Madam:

I am writing to apply for the position of welder fabrication in Canada. Utilizing my welding apprenticeship,22 year’s hands on experience, and expertise in operating all type welding and associated equipment, I can bring a huge difference to your ongoing projects.
As indicated in the enclosed RESUME,I am adept at welding metal and aluminum components to repair o fabricated products in keeping with work orders and using brazing electric metal arc and gas welding equipment. Additionally, I have demonstrated ability to read and interpret layouts and blueprint. Moreover, I am proficient in electrical tools such as band saw/press drill and grinder, and also reading tools such as dial caliper, micrometer and protractor. Above all, I am able to follow health and safety guidelines while performing the welding and fabrication task. My resume is enclosed with this letter which will give you complete information regarding my skills and experience.

I am confident that my experiences, expertise and strong interest in exceeding the goals of the company makes me an exceptional candidate for your welder position. I look forward to discussing my qualification with you further in meeting. To set up a time of interview, you can email me at the given information above.

Thank you for your time and consideration.

Sincerely,
Domingo A. Soriano
 

Engine Motor Mechanic Maintenance

Aluminum/Structural/Fabricator Welder

Birth Date:        August 04, 1965       Birth Place:       Manaoag,                   Age:      53

Height:             179.8 cm.                    Weight:             175.6 lbs.                     Gender: Male

Status:              Married                      Religion:           Roman Catholic

Passport #         EB7645489             Date of issued:   Nov.12, 2012

Educational Information:

Education       Year Attended         School                                        Course

Tertiary          1983 – 1985           Pangasinan Merchant Marine Academy             M.E.T

Perez Blvd., Dagupan City.

Secondary        1978 – 1982          Manaoag National High School                     High School

Poblacion, Manaoag Pangasinan

Primary         1972 -1978           Bisal – Bucao Elementary School                     Elementary

Brgy. Bucao Manaoag Pangasinan

Skills:

Engine Motor Mechanic Maintenance

Aluminum/Structural/Fabrication Welder.

Truck Driver/Electrical technician.

Employment Information:  (from present employment to previous)

Company:   GLOBAL SERVICE RIG AND REPAIR

Address:    8007-39 Street

Leduc, AB T9E B03

CANADA

Contact #. 1 (780) 986-1332

Fax:                (780) 986-9480

Position:    Aluminum/Steel Welder.

Dated:       November 22, 2013- November 21, 2014

Duties and Responsibilities:

As member of the team of Global Service Rig and Repair Company, I perform the entire task given by Foreman Or the lead man on duty. Especially in aluminum (GMAW) processed, I assemble and weld Catwalks, Handrails, staircases & a variety of other items all constructed at aluminum and  Mild carbon Steel materials to fix in the Rig. I’m working in a work shop as fabricator welder. I used MIG/Flux core/ Stick SMAW and TIG.

Company:        SAUDI BINLADIN GROUP CO. LTD.

Advance Vision ( SBG)

Address    : Palestine St.

P.O.BOX 8919 JEDDAH TEL .6692666

Position   : General welder

Date         : July 21, 2010 – December 30, 2012

Duties and Responsibilities:

As a welder in this company, I perform the entire task given by my superior on duty. Since I’m      assigned in Electro Mechanical Works, my jobs include welding pipes supply and pressurized pipe. In welding pipes, I strictly follow a certain procedures.

Before start to weld, I must put clearance in each end of the pipe by 1/8 diameter, and the start to weld by penetration, hot pass, and capping.

Welding to be used: 6010 and 7018 for capping.

Company   :          ROOF CENTER

Address    :          Anolid, Mangaldan, Pangasinan.

Philippines

Position     :          Structural Welder

Date          :           January 04, 2004     –   May 2010

Duties and Responsibilities:

As an employed with this company, ROOF CENTER it is my duty to perform the entire job that was   given by my superior engineer. Specially in a fabricating a steel building trusses, steel housing trusses project, according to the given Sketches/Drawing. Plan

•        Assembling Building Trusses in a roof part or in a Shop

•        Interpret Drawing and Sketches

•        Apply Safety Practice

•        Prepare Weld Materials

•        Set up the Welding Equipments

•        Fit up the Weld Materials

•         Take the size of steel materials to use, by using of measurement. (Steel tape cm/inch).

•        Size of materials

•        Steel materials to use, flat bar, angle bar, round bar

Company   :         JLD MOTOR WORKS AND GENERAL SERVCES

Address    :          San Vicente, San Jacinto Pangasinan

Philippines

Position    :           Fabrication Welder

Date         :           April 11, 1997 – August 20, 2003

Duties and Responsibilities:

As a fabricator in this company JLD MOTOR WORKS AND GENERAL    SERVICES. My job is to assemble and repair heavy equipment and light vehicles.

•        Dum box, trucks general equipments. And other construction materials.

•        Fabricating of gravity water tank.

•        Fabricating of pressurized air tank.

•        General cows and pigs vertical/horizontal feeds mixer.

Company   :     NAVITRANS MARITIME SHIPPING COMPANY

Address     :       Athens, Piraeus Greece

Position     :       Third Engineer /Engine Maintenance (Welder)

Date          :        July 31, 1987 – Nov. 24, 1996

Duties and Responsibilities:

As an officer in this company NAVITRANS MARITIME SHIPPING COMPANY. It is my duty to remove and replace, and weld all the broken part of the vessel. .

•        Auxiliary Engine, trouble shooting and replacing of engine cylinder liner piston ring connecting rod and others. Motors and pumps and Boiler. Overhauled the Auxiliary Engine.

•         Replaces bearings, packing in pumps and valves, shaft seals, sleeves, seats, and other miscellaneous parts used in engine equipment.

•        Remove and replace the material and weld all the broken parts.

•         Especially in the cargo holds, hatches cover, Cutting plate, Angle bar, Pipes and other materials to be use in replacing a broken part of the Ship. By using arc welding machine oxygen/acetylene.

•        Fabricated fixed tack and weld.

•        Knowledge in Electrical wiring’s.