C U R R I C U L U M  V I T A E

ELMER A. BACTAD

AGE: 42 (DOB: 04/18/74)

ORDILLAS ST., CABARUAN                                    MARITAL STATUS: Married

SAN MARCELINO, ZAMB.,                          RELIGION: I.N.C

PHILIPPINES                                                  HEIGHT: 5”6’

 

OBJECTIVE: To bring my strong dedication, responsibility, and motivation with a

company or institution that offers me a consistently positive atmosphere to learn and

implement new technologies for the betterment of the organization.

 

WORK HISTORY

Saudi Arabian BAYTUR (Dec 2011 – Oct 2015)

Electrical Field Supervisor

Project : King Khaled University Medical City – Male Campus PHASE II

Location  : Al Fara’a ABHA, Saudi Arabia

 

Main Role :

Provides electrical supervision to electricians and electronic repairmen around

the construction site. Works as part of a team with the Department.

 

·                    Assists Electricians and Electronic Repairmen in the resolution of difficult

problems to facilitate a timely return of equipment to construction.

·                    Monitors and communicates the training needs of Electricians and Electronic

Repairmen.

·                    Lighting distribution panels boards installation testing and commissioning.

·                    To carry out the motors function test and load according to client requirements.

·                    Commissioning, and testing of air-con control panels. Installing and testing of

fire dampers and electrical dampers.

·                    Inspection, Commissioning & Testing of Main switch board, group starter panels

& Motors.

 

AL-AHMADIAH AKTOR AKTOR J.V. (Feb 2008 – Nov 2009)

Industrial Electrician

Project : Sewage Treatment Plant (STP)

Location : Lehbab Road, DUBAI U.A.E

 

Duties & Responsibilities:

·                    Locate and troubleshoot electrical and mechanical problems for repair while

using schematics and test equipment.

·                    Responsible for installation and construction of industrial electrical equipment

and systems found in an industrial environment through the proper use of

standard wire, conduit, fittings and hardware commonly found in industrial

facilities.

·                    Install panel-boards and branch distribution equipment.

·                    Responsible for use and care of the tools and equipment commonly employed

 

 

 

in industrial construction such as conduit threading machines, hydraulic/electric

benders, knockout punch sets, cable puller, meggers, volt meters, multi-testers

and ammeters.

·                    Inspection, Commissioning & Testing of Main switch board, group starter panels

& Motors.

·                    Installation of sensors, contactors, motors, motor control, distribution boxes,

MV/LV lines, power supplies, perimeter lightings, generators, control panels,

testing and energization etc.

 

 

THAI HOO Company (Feb 2004 – Dec 2007)

Structural Welder

Location : Achi Ken NAGOYA, JAPAN

 

Main Role :

Weld structures and plates, supports for pipes, electrical instruments. Install

devices especially over head crane and all electrical works t.

 

·                    Welded metal parts together, using both gas welding and brazing, and any

combination of arc welding processes.

·                    Assisted structural steel worker in raising, placing and uniting girders, columns

and other structural-steel members to form completed structures and structure

frameworks.

·                    Signaled worker operating hoisting equipment to lift and place steel member.

·                    Welded metal components together to fabricate and repair products, such as

machine parts, plant equipment, mobile homes, motors and generators.

·                    Repaired broken and cracked parts, filled holes and increased size of metal parts.

·                    Helped lay out, fit and weld fabricated, cast and forged components to assemble

structural forms.

 

 

ADEL AL HADDAD Ready Mix Concrete Est. (Aug 2000 – Dec 2003)

Electrical Foreman

Location : AL Qatif, SAUDI ARABIA

 

Duties & Responsibilities:

·                    Purchase stocks and install all electrical works.

·                    Check and finalize the total power output and input for the plant control room

and accommodation.

·                    Over all in-charge of both batching plants and technician operator etc.

·                    Performed installation and maintenance work as part of team of skilled trade

workers.

 

AL-KHOZAMA Residential Tower (Jan 1999 – Dec 2000)

Maintenance Electrician

Location : Jeddah, SAUDI ARABIA

 

Duties & Responsibilities:

·                    Locate and troubleshoot electrical problems for repair while using schematics

and test equipment.

 

 

 

 

·                    Responsible for installation and construction of industrial electrical equipment

and systems found in an industrial environment through the proper use of

standard wire, conduit, fittings and hardware commonly found in industrial

facilities .

·                    Install panel-boards and branch distribution equipment.

·                    Responsible for use and care of the tools and equipment commonly employed in

industrial construction such as conduit threading machines, hydraulic/electric

benders, knockout punch sets, cable puller, meggers, volt meters, multi-testers

and ammeters.

·                    Inspection, Commissioning & Testing of Main switch board, group starter panels

& Motors..

·                    Installation of sensors, contactors, motors, motor control, distribution boxes,

MV/LV lines, power supplies, perimeter lightings, generators, control panels,

testing and energization etc.

 

 

FINANCIAL BUILDING CORP. (Mar 15 – Jan 1997)

Maintenance Electrician

Location : Subic Bay Olongapo City,Philippines

 

Duties & Responsibilities:

·                    Locate and troubleshoot electrical and mechanical problems for repair while

using schematics and test equipment.

·                    Responsible for installation and construction of industrial electrical equipment

and systems found in an industrial environment through the proper use of

standard wire, conduit, fittings and hardware commonly found in industrial

facilities.

·                    Install panel-boards and branch distribution equipment.

·                    Responsible for use and care of the tools and equipment commonly employed

in industrial construction such as conduit threading machines, hydraulic/electric

benders, knockout punch sets, cable puller, meggers, volt meters, multi-testers

and ammeters

 

 

EDUCATION

Elementary

Maloma Community School

 

Secondary

Maloma National High School

 

Vocational

TESDA IBA, Zambales 1993 – 1995

 

Course: Industrial Electrician

Major: Industrial Electrician

 

 

SKILLS

ROUGHING IN WORKS, INTERIOR WIRING WORKS, INSTALL DEVICES /PANEL BOURDS

TESTING AND ENERGIZATION.

 

 

 

MAIN ROLE & RESPONSIBILITIES

·        Do review and approved shop drawings of Contractors prior for the execution of the

work.

 

·        Review tender drawings in lipase with the contractors detailed shop drawings.

 

·        Responsible for the inspection on site prior for the execution of Contractors work.

 

·        Do detailed design drawing in a multi-discipline environment, Architectural, Structural,

Electrical, Mechanical and others.

 

·        Do Engineering Piping Concept design using AutoCAD software for the Saudi Aramco

Project.

 

·        Prepare and conduct estimation job, material take off, documentations, technical query

to the clients, loading data, and fabrication shop drawings.

 

·        To lead multiple activities and or projects at any given time and coordinate

with multiple disciplines, manufacturing plants & vendors.

 

·        Do review all materials and specification submitted by the Contractors.

Prepare status progress report regards to the current projects.

 

·        Allocates work and supervises output of assistant architects / designers / engineers

engaged in preparing drawings and specification documents.

 

·        To coordinate with Project Manager & Project Coordinator, PCD department

related to pilot build, manufacturing process, qualification requirements & schedules.

 

·        Prepare plan lay-out & isometric drawing design for any well sites as per clients required

 

·        Files finished drawings (electronically on the server as well as hard copies in the

drawing library) as per Engineering Dept. procedures. & (Also for ISO Quality

ManagementProcedures)

 

·        Attend Weekly Meeting for the progress of the projects.

 

·        Coordinates with all Engineering disciplines in accordance with the projects.

 

·        Do proper solution in all technical queries of the Contractors.

 

·        Responsible for all Procedures and Method Statements for approval to clients for

execution of Construction department.

 

·        Do detailed design drawings for Architectural, Civil, Mechanical, Piping/Structural and

E/I disciplines.

 

·        Planning & Executing Structural Engineering design for onshore-offshore structures and

engineering services requirements on a project.

 

·        Preparation of conceptual design in Civil, Structural & Piping as per company standard.

 

·        Preparation of material requisition and material specification.

 

·        Checking of drawings, calculation reports and B.O.Q’s. Including standardization  of

deliverables to Quality System.

 

·        In-charge for managing and training the subordinate engineer & all CAD operators

to improve the office drafting standard.

 

·        Prepare status progress report regards to the current projects.

 

·        Prepare and conduct estimation job, material take off, documentations, technical query

To the clients, loading data, and fabrication shop drawings.

 

·        To lead multiple activities and or projects at any given time and coordinate with

multiple disciplines, manufacturing plants & vendors.

 

·        To ensure clients / customer’s contract & quality requirements are achieve within budget

on time and to the satisfaction of external & internal customer.

 

·        To identify and resolve with the team any potential deviations from the approved project

plan.

 

·        To coordinate with Project Manager & Project Coordinator, PCD department

related to pilot build, manufacturing process, qualification requirements & schedules.

 

·        Do pipeline and well sites piping lay-out /designs prior to fabrication as per client

required.

 

·        Prepares a wide range of technical drawings for all discipline on-site project

implementation.

 

·        Coordinates with Steel Support Engineer for steel design.

 

·        Incorporates materials approved by Material Engineer into shop drawings.

 

·        Produces new drawings to incorporate design changes, additions and

variation orders as per client/consultant requirements.

 

·        Assists in preparation of operating and maintenance manuals, studies, and reports for

projects.

 

·        Assists Project Directors in following-up various stages of projects.

 

·        Allocates work and supervises output of assistant architects / designers / engineers

engaged in preparing drawings and specification documents.

 

·        Files finished drawings (electronically on the server as well as hard copies in the drawing

library) as per

 

·        Engineering Dept. procedures. & (Also for ISO Quality Management Procedures)

 

·        Prepare plan lay-out & isometric drawing design for any well sites as per clients required

 

·        Extracts quantities from tender documents and studies their specifications to produce

·        shop drawings.

 

·        Directly report to the President, Project Manager, & Lead Project Site Engineer.

 

·        Deliver administration and technical support within the contract department.

 

·        Prepare and conduct estimation job, material take off, documentations, technical query

to the clients, loading data, and fabrication shop drawings.

 

·        Responsible for all Technical Query against clients drawings during bid stages.

 

·        Responsible for Change Order and for Bid Quotation.

 

·        Drafting (structural, electrical, sanitary, perspective, etc.)

 

·        In-charge in AutoCAD Operation; Walkthrough Design (Architectural, Civil,  & Electrical)

 

·        Responsible in Projects Design Presentation and Project Management.

 

·        Prepare perspectives for the specific demand of the clients like interior designs for

housing or building construction.

 

·        Prepare visual reports on MS PowerPoint for Board Meetings and Manager’s

presentation.

 

·        Directly coordinate with prospective client; prepare proposal letter, transmittal letter;

prepare statement of account and monthly billing progress.

 

·        Handle and design announcement and other pharapernallas for advertising

 

·        Prepares and submit proposal to prospective client; monitors the proposal approval

 

·        Keeps and maintaining significant document of the clients. Making status reports every

end of the month.

 

·        Teamwork with members of the department attained through synergy

 

·        Produce cost effective proposals and tenders to meet client’s specifications.

 

·        Set clear objectives for project implementation, monitor progress against them and take

corrective action as needed.

 

·        Responsible for all detailed designs in Architectural, Civil, & Mechanical.

 

·        Prepare and conduct estimation job, material take off, documentations, technical query

to the clients, loading data, and fabrication shop drawings.

 

·        Planning schematic drawings (floor plans, elevations and sections) for clients

In-charge in Auto Cad Operation; Walkthrough Design (Floor Plans)

 

·        Provide comprehensive support to the Manager

 

·        Responsible in AutoCAD and any other related tasks for the clients.

 

·        Accurate, professional and on time preparation of documents and reports.

 

·        Prepare visual reports on MS PowerPoint for Board Meetings and Manager’s presentation.

 

 

LANGUAGES SPOKEN

·        English (3/5)

·        Arabic (3/5)

·        Tagalog (5/5)

 

 

REFERENCES

 

Bernabe Condino

Electrical Engineer

Saudi Real State Construction Co.

Email: [email protected]

 

 

I hereby certify that the above information are true and correct

to the best of my belief and knowledge.

 

 

 

Elmer Bactad

Applicant

C U R R I C U L U M  V I T A E

ELMER A. BACTAD

AGE: 42 (DOB: 04/18/74)

ORDILLAS ST., CABARUAN                                    MARITAL STATUS: Married

SAN MARCELINO, ZAMB.,                          RELIGION: I.N.C

PHILIPPINES                                                  HEIGHT: 5”6’

 

OBJECTIVE: To bring my strong dedication, responsibility, and motivation with a

company or institution that offers me a consistently positive atmosphere to learn and

implement new technologies for the betterment of the organization.

 

WORK HISTORY

Saudi Arabian BAYTUR (Dec 2011 – Oct 2015)

Electrical Field Supervisor

Project : King Khaled University Medical City – Male Campus PHASE II

Location  : Al Fara’a ABHA, Saudi Arabia

 

Main Role :

Provides electrical supervision to electricians and electronic repairmen around

the construction site. Works as part of a team with the Department.

 

·                    Assists Electricians and Electronic Repairmen in the resolution of difficult

problems to facilitate a timely return of equipment to construction.

·                    Monitors and communicates the training needs of Electricians and Electronic

Repairmen.

·                    Lighting distribution panels boards installation testing and commissioning.

·                    To carry out the motors function test and load according to client requirements.

·                    Commissioning, and testing of air-con control panels. Installing and testing of

fire dampers and electrical dampers.

·                    Inspection, Commissioning & Testing of Main switch board, group starter panels

& Motors.

 

AL-AHMADIAH AKTOR AKTOR J.V. (Feb 2008 – Nov 2009)

Industrial Electrician

Project : Sewage Treatment Plant (STP)

Location : Lehbab Road, DUBAI U.A.E

 

Duties & Responsibilities:

·                    Locate and troubleshoot electrical and mechanical problems for repair while

using schematics and test equipment.

·                    Responsible for installation and construction of industrial electrical equipment

and systems found in an industrial environment through the proper use of

standard wire, conduit, fittings and hardware commonly found in industrial

facilities.

·                    Install panel-boards and branch distribution equipment.

·                    Responsible for use and care of the tools and equipment commonly employed

 

 

 

in industrial construction such as conduit threading machines, hydraulic/electric

benders, knockout punch sets, cable puller, meggers, volt meters, multi-testers

and ammeters.

·                    Inspection, Commissioning & Testing of Main switch board, group starter panels

& Motors.

·                    Installation of sensors, contactors, motors, motor control, distribution boxes,

MV/LV lines, power supplies, perimeter lightings, generators, control panels,

testing and energization etc.

 

 

THAI HOO Company (Feb 2004 – Dec 2007)

Structural Welder

Location : Achi Ken NAGOYA, JAPAN

 

Main Role :

Weld structures and plates, supports for pipes, electrical instruments. Install

devices especially over head crane and all electrical works t.

 

·                    Welded metal parts together, using both gas welding and brazing, and any

combination of arc welding processes.

·                    Assisted structural steel worker in raising, placing and uniting girders, columns

and other structural-steel members to form completed structures and structure

frameworks.

·                    Signaled worker operating hoisting equipment to lift and place steel member.

·                    Welded metal components together to fabricate and repair products, such as

machine parts, plant equipment, mobile homes, motors and generators.

·                    Repaired broken and cracked parts, filled holes and increased size of metal parts.

·                    Helped lay out, fit and weld fabricated, cast and forged components to assemble

structural forms.

 

 

ADEL AL HADDAD Ready Mix Concrete Est. (Aug 2000 – Dec 2003)

Electrical Foreman

Location : AL Qatif, SAUDI ARABIA

 

Duties & Responsibilities:

·                    Purchase stocks and install all electrical works.

·                    Check and finalize the total power output and input for the plant control room

and accommodation.

·                    Over all in-charge of both batching plants and technician operator etc.

·                    Performed installation and maintenance work as part of team of skilled trade

workers.

 

AL-KHOZAMA Residential Tower (Jan 1999 – Dec 2000)

Maintenance Electrician

Location : Jeddah, SAUDI ARABIA

 

Duties & Responsibilities:

·                    Locate and troubleshoot electrical problems for repair while using schematics

and test equipment.

 

 

 

 

·                    Responsible for installation and construction of industrial electrical equipment

and systems found in an industrial environment through the proper use of

standard wire, conduit, fittings and hardware commonly found in industrial

facilities .

·                    Install panel-boards and branch distribution equipment.

·                    Responsible for use and care of the tools and equipment commonly employed in

industrial construction such as conduit threading machines, hydraulic/electric

benders, knockout punch sets, cable puller, meggers, volt meters, multi-testers

and ammeters.

·                    Inspection, Commissioning & Testing of Main switch board, group starter panels

& Motors..

·                    Installation of sensors, contactors, motors, motor control, distribution boxes,

MV/LV lines, power supplies, perimeter lightings, generators, control panels,

testing and energization etc.

 

 

FINANCIAL BUILDING CORP. (Mar 15 – Jan 1997)

Maintenance Electrician

Location : Subic Bay Olongapo City,Philippines

 

Duties & Responsibilities:

·                    Locate and troubleshoot electrical and mechanical problems for repair while

using schematics and test equipment.

·                    Responsible for installation and construction of industrial electrical equipment

and systems found in an industrial environment through the proper use of

standard wire, conduit, fittings and hardware commonly found in industrial

facilities.

·                    Install panel-boards and branch distribution equipment.

·                    Responsible for use and care of the tools and equipment commonly employed

in industrial construction such as conduit threading machines, hydraulic/electric

benders, knockout punch sets, cable puller, meggers, volt meters, multi-testers

and ammeters

 

 

EDUCATION

Elementary

Maloma Community School

 

Secondary

Maloma National High School

 

Vocational

TESDA IBA, Zambales 1993 – 1995

 

Course: Industrial Electrician

Major: Industrial Electrician

 

 

SKILLS

ROUGHING IN WORKS, INTERIOR WIRING WORKS, INSTALL DEVICES /PANEL BOURDS

TESTING AND ENERGIZATION.

 

 

 

MAIN ROLE & RESPONSIBILITIES

·        Do review and approved shop drawings of Contractors prior for the execution of the

work.

 

·        Review tender drawings in lipase with the contractors detailed shop drawings.

 

·        Responsible for the inspection on site prior for the execution of Contractors work.

 

·        Do detailed design drawing in a multi-discipline environment, Architectural, Structural,

Electrical, Mechanical and others.

 

·        Do Engineering Piping Concept design using AutoCAD software for the Saudi Aramco

Project.

 

·        Prepare and conduct estimation job, material take off, documentations, technical query

to the clients, loading data, and fabrication shop drawings.

 

·        To lead multiple activities and or projects at any given time and coordinate

with multiple disciplines, manufacturing plants & vendors.

 

·        Do review all materials and specification submitted by the Contractors.

Prepare status progress report regards to the current projects.

 

·        Allocates work and supervises output of assistant architects / designers / engineers

engaged in preparing drawings and specification documents.

 

·        To coordinate with Project Manager & Project Coordinator, PCD department

related to pilot build, manufacturing process, qualification requirements & schedules.

 

·        Prepare plan lay-out & isometric drawing design for any well sites as per clients required

 

·        Files finished drawings (electronically on the server as well as hard copies in the

drawing library) as per Engineering Dept. procedures. & (Also for ISO Quality

ManagementProcedures)

 

·        Attend Weekly Meeting for the progress of the projects.

 

·        Coordinates with all Engineering disciplines in accordance with the projects.

 

·        Do proper solution in all technical queries of the Contractors.

 

·        Responsible for all Procedures and Method Statements for approval to clients for

execution of Construction department.

 

·        Do detailed design drawings for Architectural, Civil, Mechanical, Piping/Structural and

E/I disciplines.

 

·        Planning & Executing Structural Engineering design for onshore-offshore structures and

engineering services requirements on a project.

 

·        Preparation of conceptual design in Civil, Structural & Piping as per company standard.

 

·        Preparation of material requisition and material specification.

 

·        Checking of drawings, calculation reports and B.O.Q’s. Including standardization  of

deliverables to Quality System.

 

·        In-charge for managing and training the subordinate engineer & all CAD operators

to improve the office drafting standard.

 

·        Prepare status progress report regards to the current projects.

 

·        Prepare and conduct estimation job, material take off, documentations, technical query

To the clients, loading data, and fabrication shop drawings.

 

·        To lead multiple activities and or projects at any given time and coordinate with

multiple disciplines, manufacturing plants & vendors.

 

·        To ensure clients / customer’s contract & quality requirements are achieve within budget

on time and to the satisfaction of external & internal customer.

 

·        To identify and resolve with the team any potential deviations from the approved project

plan.

 

·        To coordinate with Project Manager & Project Coordinator, PCD department

related to pilot build, manufacturing process, qualification requirements & schedules.

 

·        Do pipeline and well sites piping lay-out /designs prior to fabrication as per client

required.

 

·        Prepares a wide range of technical drawings for all discipline on-site project

implementation.

 

·        Coordinates with Steel Support Engineer for steel design.

 

·        Incorporates materials approved by Material Engineer into shop drawings.

 

·        Produces new drawings to incorporate design changes, additions and

variation orders as per client/consultant requirements.

 

·        Assists in preparation of operating and maintenance manuals, studies, and reports for

projects.

 

·        Assists Project Directors in following-up various stages of projects.

 

·        Allocates work and supervises output of assistant architects / designers / engineers

engaged in preparing drawings and specification documents.

 

·        Files finished drawings (electronically on the server as well as hard copies in the drawing

library) as per

 

·        Engineering Dept. procedures. & (Also for ISO Quality Management Procedures)

 

·        Prepare plan lay-out & isometric drawing design for any well sites as per clients required

 

·        Extracts quantities from tender documents and studies their specifications to produce

·        shop drawings.

 

·        Directly report to the President, Project Manager, & Lead Project Site Engineer.

 

·        Deliver administration and technical support within the contract department.

 

·        Prepare and conduct estimation job, material take off, documentations, technical query

to the clients, loading data, and fabrication shop drawings.

 

·        Responsible for all Technical Query against clients drawings during bid stages.

 

·        Responsible for Change Order and for Bid Quotation.

 

·        Drafting (structural, electrical, sanitary, perspective, etc.)

 

·        In-charge in AutoCAD Operation; Walkthrough Design (Architectural, Civil,  & Electrical)

 

·        Responsible in Projects Design Presentation and Project Management.

 

·        Prepare perspectives for the specific demand of the clients like interior designs for

housing or building construction.

 

·        Prepare visual reports on MS PowerPoint for Board Meetings and Manager’s

presentation.

 

·        Directly coordinate with prospective client; prepare proposal letter, transmittal letter;

prepare statement of account and monthly billing progress.

 

·        Handle and design announcement and other pharapernallas for advertising

 

·        Prepares and submit proposal to prospective client; monitors the proposal approval

 

·        Keeps and maintaining significant document of the clients. Making status reports every

end of the month.

 

·        Teamwork with members of the department attained through synergy

 

·        Produce cost effective proposals and tenders to meet client’s specifications.

 

·        Set clear objectives for project implementation, monitor progress against them and take

corrective action as needed.

 

·        Responsible for all detailed designs in Architectural, Civil, & Mechanical.

 

·        Prepare and conduct estimation job, material take off, documentations, technical query

to the clients, loading data, and fabrication shop drawings.

 

·        Planning schematic drawings (floor plans, elevations and sections) for clients

In-charge in Auto Cad Operation; Walkthrough Design (Floor Plans)

 

·        Provide comprehensive support to the Manager

 

·        Responsible in AutoCAD and any other related tasks for the clients.

 

·        Accurate, professional and on time preparation of documents and reports.

 

·        Prepare visual reports on MS PowerPoint for Board Meetings and Manager’s presentation.

 

 

LANGUAGES SPOKEN

·        English (3/5)

·        Arabic (3/5)

·        Tagalog (5/5)

 

 

REFERENCES

 

Bernabe Condino

Electrical Engineer

Saudi Real State Construction Co.

Email: [email protected]

 

 

I hereby certify that the above information are true and correct

to the best of my belief and knowledge.

 

 

 

Elmer Bactad

Applicant