JEPHY R. MINO
BUTUAN CITY, PHILIPPINES
CONTACT NO: +96894870344/+639451309277
E-MAIL ADD: [email protected]

POSITION APPLIED:

SUMMARY OF EXPERIENCE:

Has more than 9 years of Technical experience in the field of Electrical and Instrumentation and Control System both local and overseas, including Construction, Pre-Commissioning, Commissioning start-up, Emergency shutdown, preventive maintenance in Petrochemicals, Oil and Gas Refinery, Power and Water plant, and High-Rise Building.
Proven knowledge in Electrical and Instrumentation such as, Documentation, Functional Testing, Instrument Calibration, Loop Checking and Installation of Electrical devices.

EDUCATIONAL BACKGROUND:

COLLEGE:
TECHNOLOGICAL UNIVERSITY OF THE PHILS. TAGUIG CAMPUS
Km. 14 East Service Rd. South Super Highway Taguig City
Electrical Engineering Technology (2004-2008)

Registered Master Electrician (2009)
License No. 0035725

Qualification:

 Quick learner and grasp new things quickly
 Highly motivated with ability to work as a team member or independent to meet deadlines
 Strong desire to study and comprehend new technology
 Able to work from verbal instruction, blueprints, wiring diagram, schematics, technical publication and instructions bulletins.
 Ability to write routine reports and correspondence as well as good verbal communications skills
 In-depth ability to make mathematical computations

SKILLS:
Computer operation (MS Word, Excel, PowerPoint)
Knowledge of electrical & instrument installation and troubleshooting
Reading and interpretation of P&ID, Hook Up, Schematic diagram blueprint

PROFESSIONAL EXPERIENCE:

COMPANY: DALMAR ENGINEERING CONSULTANCY/ABALTO LLC OMAN
POSITION: INSTRUMENT COMMISSIONING TECHNICIAN

PROJECT SCOPE OF WORK CLIENT CONTRACTORS DATE
PDO ALARM MANAGEMENT PDO ABALTO LLC MAY/DEC. 2019
DALEEL PETROLEUM MAINTENANCE DALEEL PETROLEUM ABALTO LLC APRIL/MAY
2018
SALALAH METHANOL PLANT UPGRADING/SHUTDOWN SMC &
HONEYWELL DALMAR ENG’G.CONSULTANCY MARCH/APRIL
2018
CPF KHAZZAN COMMISSIONING BRITISH
PETROLEUM CCC/PETROFAC
JOINT VENTURE MAY/OCT.
2017
SRIP CONSTRUCTION
COMMISSIONING ORPIC DAELIM/PETROFAC
JOINT VENTURE DEC.2015 to
MAY 2017

RESPONSIBILITIES:

Perform of signal simulation and functional loop testing of field instruments with the coordination of boardman on DCS console to obtained and confirmed of those I/O signals.
Perform loop checking both hart protocol and field bus instrument such as Level, Flow, Pressure and Temperature Transmitter.
Pre-Commissioning and Functional Test of process loop by interpretation of loop drawing, instrument cabling and termination details, hook-up drawing, P& ID and Cause and Effect diagram.
Calibration and stroking of control valves such as glove valve, Masoneilan, and Fisher.
Perform interpanel line checking and termination such as prefab cables, Ethernet cables, server cables, data cables and system cables (panel to panel).
Perform preventive maintenance activities on instrumentation and control system and dosing pump
Monitoring of all installed instrument
Testing of fire alarm, smoke detector and heat protector.
Assist the work for Shutdown and witness the inspection of Instrument
Perform work order repairs, inspection and adjustment as per Maintenance Supervisor
Participates in plant safety and environment programs.

COMPANY: SAMYOUNG SAUDI ARABIA COMPANY LTD.
PROJECT: POWER & WATER PLANT
CLIENT: MARAFIC
CONTRACTORS: HANWA E & C and DOOSAN HEAVY I and C
POSITION: INSTRUMENT FITTER
INCLUSIVE DATE: June 2014 – June 2015

RESPONSIBILITIES:

Executing Loop Check and Functional Testing of instruments based on prepared instrument loop drawing packages and schedule such as Foundation Fieldbus and HART Protocol transmitters, actuated control valves, pressure switch and hand switch. Expedited all mismatch connections and tagging as per connection shall be rectified and modified as soon as possible. Cooperating the vendor for configuration in system and punch item clearance activity related with system calibration of vibration probes on motors, compressors and slurry pumps.

COMPANY: DAEWOO E & C
PROJECT: Papua New Guinea/ LNG
CLIENT: Exxon Mobil
CONTRACTORS: Chiyoda -JGC Joint Venture
POSITION: Electrical & Instrument Technician
INCLUSIVE DATE: April 2013- April 2014

RESPONSIBILITIES:

Executing Loop-check and Functional Test of instruments based on prepared instrument loop folder packages and rectify problems with minimum supervision, pertaining to instrumentation and control. Cooperating with the operations staff during start-up on running equipment. Carries out instrument maintenance includes regular monitoring, disassembly, repair and reassembly of equipment, as well as implementation of modification. Carries instrument maintenance in the areas of Plant facilities such as Process & Utilities to ensure that maintenance work is executed in accordance with company’s standards, codes, and practices. Carries out predictive maintenance checks and tests on running equipment includes monitoring temperatures, pressures, checks of oil level and other related general running conditions. Carries out routine preventive maintenance according to schedules, check lists and specific equipment requirements. Repairs and/or replaces defective parts, reassembles overhauled equipment and carries out necessary tests and performance monitoring upon start-up. Carries out a wide range of corrective maintenance and repairs as a result of condition monitoring checks or failures of equipment includes the dismantling of various equipment, the analysis of the failure, the decision on how the repair, the equipment reassembly, the commissioning and test run of equipment.

COMPANY: KENTZ ENGINEERS and CONSTRUCTORS
PROJECT: SIDRA MEDICAL and RESEARCH CENTRE/DOHA QATAR
CLIENT: QATAR PETROLEUM
CONTRACTORS: OHL and CONTRAK JOINT VENTURE
POSITION: Electrician/Electrical Technician
INCLUSIVE DATE: Aug.2010- Sept.2012

RESPONSIBILITIES:

Installation of Panel Board and Cable Glanding
Wiring of Lighting and Power as per plan schedule
Wiring and Termination of LTC, Power Pack Relay, OSi
Wiring and Termination of control for FCU, VAV, Fire Damper, Thermostat, Duct Sensor, DPT
Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
Conduct Testing and Commissioning
Perform specific electrical maintenance and engineering functions assigned by Engineering/Facility Manager. .
Coordinate the QA/QC, Electrical Consultant (KEO) for RFIT’s
Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.

COMPANY: ALECTO GENERAL TECHNOLOGY CORP.
POSITION: Electrician
INCLUSIVE DATE: Sept. 2006- July 2010

RESPONSIBILITIES:

Tested and adjusted equipment to obtain proper operating characteristics.
Rewired and installed panel boards and switches.
Performed installation of conduit.
Troubleshoot, diagnosed and corrected electrical problems in the power distribution, electrical equipment and lighting systems.
Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.
Test electrical systems and continuity of circuits in electrical wiring, transformer, generator, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system.
Installations of LV and telecommunication devices such as voice and data, speaker, CCTV, FDAS, VESDA, Fire Damper

SEMINARS/TRAININGS ATTENDED:

CRESCENT TECHNOLOGIES
AUTOCAD for the PROFESSIONAL LEVEL 1 & 2
March 8 to 15 2014

CRESCENT TECHNOLOGIES
COMPUTER – AIDED COST ESTIMATION for
BUILDING CONSTRUCTION
March 29 to 30, 2014

T.E.S.D.A. – TAGUIG
INSTRUMENTATION AND CONTROL NC II

May to July 2009
 Troubleshooting of instrument and control malfunction and in selecting the proper corrective actions
 Familiarization of Highway Addressable Remote Transducer (HART)
 Identify and use a variety of test and measurement equipment’s including digital and analogue voltmeters, pneumatic and smart calibrators.
 Performs a variety of skilled work related to installation, calibration of control valves, pressure, level, flow and temperature controllers, including running and tracing complex loop wiring.

PERSONAL BACKGROUND:

BIRTH DATE December 30, 1986
BIRTH PLACE Butuan City
CIVIL STATUS Single
GENDER Male
HEIGHT 5’3”
WEIGHT 130lbs.
LANGUAGE SPOKEN English and Filipino

CHARACTER REFERENCES:

Engr. Pal Maleter Domingo Engr. Amiel Pepito
Section Head Electrical Department Abalto LLC OMAN
TUP-Taguig +96896181009 09178940721 Senior E & I Engineer

Joel Benzon
Electrical and Instrument Supervisor
KENTZ Engineers and Constructors
09294148369

I hereby certify that the above information is true and authentic to the best of my knowledge and belief.

JEPHY MINO