Comprehensive Resume’ Of

Joel David Ramos
BSME, RME Lic # : 0044738 (PHILS)
ADDRESS:
13915 Sherman Way #109
Van Nuys, CA
91405-2500 USA
Tel.#.: 1.818.378.8567
Emails: [email protected],
[email protected]

WORK EXPERIENCE

Realtech Construction, LLC
ONE PARK PLAZA
3250 Wilshire Blvd.
Los Angeles, CA
90010 USA

Building Engineer
Feb 2014- Present

DUTIES And RESPONSIBILITIES

Diagnose, Troubleshoot And A​nalyze HVAC units and equipment.

HVAC Installations and Load calculations.

P​lanning, s​cheduling and E​valuating
preventive maintenance of equipment listed below.
These equipment include:
•HVAC/Heat Pumps (2.0 – 5.0 TON) – approx 500 units
• HVAC/Heat Pumps (15 – 30 TON)
•Cooling Towers ​(12.0 Million BTU/HR Each)
•Water Softener system for Cooling Towers
•Boilers ( 2.25 Million BTU/HR Each)
•Centrifugal pumps ( 840 GPM) and (50HP) Motors
• I​nstallation/retrofit of HVAC units.
• Water Sprinkler System
•Domestic water pumps (90-250 GPM)
•250 HP Diesel Engines (ICE) – 2 units
•1.5 MW Diesel Engine – 1 unit
•Fire Pump Motor – 250 HP
•Fire pumps – (750- 1500 GPM)
•Fans and Blower motors

Performance testing on every HVAC unit to be installed.

F​ormulates and develops preventive maintenance schedules and checklists on all equipment mentioned above.

Regular testing of five (5) backup Diesel
Engine Generators and Fire pumps to ensure reliability.

M​aintain proper operations of all HVAC systems, Mechanical, Electrical, and Plumbing systems.

Maintenance of water softener system used for the cooling towers by maintaining safe PH level, conductivity, turbidity and etc.

M​aintain parts and equipment stocks and inventory.

M​aintain Maintenance logs, checklists and records.

JOB EXPOSURES

A​ssist in maintaining the building property, (physical building structure, all mechanical, electrical, HVAC systems and related equipment)

A​ssist in identifying energy savings and other cost reduction opportunities.

A​ssist in the day to day operations of Engineering and Maintenence Department.

A​ssist in research and recommendations for more cost-effective and efficient methods of operating and maintaining building systems.

O​versees and inspects the work performed by vendors and outside contractors.

R​outine repairs as per request.

M​aintains life safety, environmental and emergency procedures and programs per local and building codes.

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
JORAM Car Trade Centrum
Metropolis Star Mall
Alabang, Muntinlupa
Metro Manila

Proprietor
Feb 2003 – 2013

Business Profile And Job Exposures
Buying And Selling Of pre-owned cars.

Diagnoses newly acquired pre-owned motor vehicles’ troubles.

Prepares motor vehicle, if necessary, for Engine repair,

body repainting, Tune ups and troubleshooting.

Negotiating the price of the car and explaining/ emphasizing its features.

Maintaining sales records.

In-charge in all paperworks for vehicles documentation, i.e. financing, transfer of ownership and etc.

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SIMON CORPORATION
Yanaizu City, Fukushima
Fukushima, Japan

Lead Maintenance Engineer
July 1995 – Nov 2002

DUTIES And RESPONSIBILITIES
Directly reporting to the Plant Manager,

Researched And Development on Mechanical enhancements And
technical feasibility of new machines and designs.

In-charge in the maintenance of the following Equipment & pneumatic machines:

2 (two) unit Diesel Engines.

HVAC units

2 (two) unit Air compressors

4 (four) unit Injection And molding machines,

Assist in the scheduling of maintenance of 2.0 MW Diesel Engines.

Reports activities undertaken as well as the operating conditions of all operational equipment.

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
ROHM ELECTRONICS PHILIPPINES, INC.
PTC Carmona
Cavite, Philippines

Maintenance Supervisor – Section Head
Equipment Control Department/ Power Plant Section Engine/ Generator Section
Sept. 1992 – July 1995

DUTIES And RESPONSIBILITIES
Directly reporting to the Department Manager, Planning/Organizing work activities in Maintenance section,

Develops and implements cost saving measures.

Formulates maintenance procedures and checklist for (5) units NIIGATA DIESEL ENGINEs coupled with NISHISHIBA
SYNCHRONOUS GENERATORs And its Auxiliaries.

In-charge in the scheduling of daily, weekly, monthly and annual preventive maintenance of Diesel Power Plant And the
following Auxiliaries below:

Training and Orientation of new recruits in both Operation & Maintenance Of Diesel Engine Power Plant and auxiliaries mentioned above,

In-charge in controlling spare parts And Tools inventories,

Planning, implementing and checking of work order-including

coordination and consultation of Engine Maker,

Assist in the maintenance of 5 unit KOBELCO Air Compressors model AL-132 and two (2) unit HENSCHEL BOILERS model HKL-1800KL.

In-charge in the scheduling of daily, weekly, monthly and annual preventive maintenance of Diesel Power Plant And the
following Auxiliaries below:

Fuel Oil Filters, Lubricating Oil Filters, Line Heaters (for Bunker Fuels), Oil Purifiers, Oil Viscosity controllers, Cooling Towers And Fans, Pumps and Motors.

:: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
ROHM Fukuoka Company, LTD.
Oita Shi, Fukuoka
Japan

Maintenance Engineer
Semi Process (CSA/CBA Department)
Dec. 1991 – Sept. 1992 (Cavite, Phils.)
Jun. 1991 – Dec. 1991 ( Fukuoka, Japan )

DUTIES And RESPONSIBILITIES
Research And Development on Mechanical enhancements And technical feasibility of new machines and equipment designs used for the production of micro-chip resistors.

Repair And Troubleshooting of electro pneumatic machines used for the production of micro-chip resistors,

Assist in the scheduling of preventive maintenance of electro-pneumatic machines used for the production of
micro-chip resistors in CSA/CBA Department.

JOB EXPOSURES
Operation and Maintenance of two (2) unit NIIGATA DIESEL ENGINES model 12V32CLX, 5820 PS output, 4 cycle coupled with
NISHISHIBA Generator with the following specifications: 4.1 Mega Watt (MW), 4160V, 80% power factor, 600 rpm, 3 phase.

Operation and Maintenance of three (3) unit NIIGATA DIESEL ENGINES model 6L32CLX, 2878 PS output, 4 cycle coupled with NISHISHIBA Generator with the following specifications: 2.0 Mega Watt, 4160V, 80% power factor, 600 rpm, 3 phase.

Operation and maintenance of five (5) unit KOBELCO screw type and oil free Compressors model AL 132 And two (2) unit
EBARA HENSCHEL Boilers model HKL 1800KA.

Maintenance of Cooling Towers, electric motors and pumps, small compressors, Supply Fans, Exhaust Fans And Air Filters.

Maintenance of Lubricating Oil Purifiers and Filters, Fuel Oil Filters and Viscosity controllers.

Maintenance of Pneumatic machines used for the production Of Micro chip Resistors and Capacitors.

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
ARGONNE ENGINEERING AND CONSTRUCTION
San Juan City, Metro Manila
Philippines

Resident Engineer
March 1990 – April 1991

DUTIES And RESPONSIBILITIES
Reporting to the PROJECT ENGINEER,

In-charged in checking and verifying and supervision of mechanical projects of the firm, ie. Plumbing and HVAC System.

Coordinates material deliveries, scheduling of subcontracted work and third party inspections

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SEBASTIAN MACHINE WORKS
Angeles City, Pampanga
Philippines

Asst. Maintenance Engineer ​( OJT)
Nov. 1989 – Feb. 1990

Duties And Responsibilities

∙ Reporting to the MAINTENANCE ENGINEER.
∙ Supervision in both preventive and scheduled maintenance of different types of Machines in a shop environment like lathe machines, Boring machines.

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
EDUCATION & AFFILIATION

1991 Graduated Bachelor Of Science In Mechanical Engineering (BSME)
TARLAC STATE UNIVERSITY
Tarlac City, Pampanga
Philippines.
http://www.tsu.edu.ph/

1992 Passed the Licensure Examination For Mechanical Engineers
∙ Given by the:
PROFESSINAL REGULATION COMMISSION
Manila, Philippines
http://www.prc.gov.ph

∙ Member:
PHILIPPINE SOCIETY OF MECHANICAL ENGINEERS
Manila, Philippines
http://www.psme.org.ph

2005 Undergraduate Auto Technician and Tune up Mechanic North Valley Occupational Center
Mission Hills, CA
http://www.nvoc.org/

2009 Certified Nursing Assistant (CNA)
St. Jude Nursing School
Panorama City, CA
http://www.stjudenursingschool.com/

2009 Certified Home Health Aide (CHHA)
St. Jude Nursing School
Panorama City, CA
http://www.stjudenursingschool.com/

2014 Graduated Refrigeration & Aircon Technician:FUNDAMENTALS
North Valley Occupational Center
Mission Hills, CA
http://www.nvoc.org/

2014 Passed the EPA 608 Certification Examination ( Type I, Type II, Type III, & Universal)
∙ Given by the U.S. Environmental Protection Agency/ ESCO Institute
​Los Angeles, CA

2015 Graduated Refrigeration & Aircond Technician: SERVICE
North Valley Occupational Center
Mission Hills, CA
http://www.nvoc.org

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
TRAININGS And SEMINARS Attended

∙ 2014​ Building Automation : Conducted by CINTAS Representatives and Engineers

∙ 2014​ Asbestos Handling : Conducted by OPP Chief Engineer

∙ 2014​ Seminar On Building Fire And Safety : Conducted by L.A.F.D. Staffs

∙ 1994​ Productivity Enhancements through People : Conducted by Mr. Rodolfo M. Vitangcol.

∙ 1993​ Seminars on Waste Water Treatments : Conducted by the Engineers of NIIGATA ENGINEERING Co. LTD in Niigata, Japan.

∙ 1993​ Seminars on Lubricants II : Conducted by the representative of SHELL Co. Philippines.

∙ 1992​ Seminars on Fuel Oils and Lubricants : Conducted by representatives of Petron Philippines Corporation

∙ 1992 Specialized Trainings in the Operation And Maintenance of 2.0 MegaWatt And 4.0 MegaWatt NIIGATA DIESEL ENGINES: Conducted by the Engineers And Technicians of NIIGATA ENGINEERING Co. LTD., Niigata, Japan.

∙ 1992 ​ Troubleshooting, Fault analysis, and overhauling of engine parts and Auxiliaries : Conducted by the Engineers And Technician of NIIGATA ENGINEERING Co. LTD., Niigata, Japan.

∙ 1992​ Operation and Familiarization of NISHISHIBA Generator​ set : Conducted by the representative of Nishishiba Electric Co. Japan.

∙ 1992 ​ Specialized trainings in Operation And Maintenance of​ KOBELCO Air Compressor model AL 132 : Conducted by ROHM Fukuoka Engineers.

∙ 1992​ Specialized trainings in Operation And Maintenance of EBARA HENSCHEL Boiler model HKL 1800 : Conducted by ROHM Fukuoka Engineers.

∙ 1991​ Specialized Trainings in the Maintenance of electro-pneumatic machines used for the production of​ microchip resistors : Conducted by the Engineers of ROHM Fukuoka in Fukuoka, Japan.

: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
REFERENCE
∙ Available upon request

DECLARATION

I do hereby declare that the information given above is true and correct to the best of my knowledge.

Joel D. Ramos