JOSEPH GENER HERNANDEZ
SENIOR PROJECT ENGINEER
EDUCATION
Bachelor of Science in Mechanical Engineering Technological Institute of the Philippines
Manila Philippines 1992 – 1997
WORK EXPERIENCE
Inter Equip Supplies Pte Ltd – 20 Ang Mo Kio Industrial Park 2A, Singapore 567761
Senior Project Engineer – November 01 2019 – Present
 Assist the Project manager in daily Execution of work
 Ensure that the works are carried out in accordance with the Project Quality and Safety Plan, contract requirements including drawings and specifications
 Prepare and develop Lifting plans, Method Statement, Risk Assessment and Safe Work Procedure for individual projects.
 Attending Clients meeting and Prepare project schedules and progress reports.
 Monitor, control and coordinate site works with the operations team and as well as contractors
 Establish and implement controls to ensure that works are carried out safely according to the works programme and produce short term work plans
 To check the Construction drawings and highlight discrepancies
 Monitor and control progress to make sure that turn over and cost is in line with master construction program
 Ensure material submission and approval, ordering and delivery are according to agreed schedules
Experienced Project Engineer with a demonstrated history of working in the construction industry. With almost 10 years in Heavy Lifting and transportation. Skilled in AutoCAD, Welding, Hydraulics, Maintenance & Repair, and Preventive Maintenance. Strong engineering professional with a Bachelor’s degree focused in Bachelor of Science in Mechanical Engineering
OBJECTIVE
To obtain an engineering position that allows me to use and expand my current skill set.
 To seek a challenging career opportunity where my skills and knowledge can be contributed to the company’s growth.
CONTACT
ADDRESS:
981B Buangkok Crescent 16-25 Singapore 532981
PHONE:
+65 92310103
EMAIL: [email protected]
PROFILE
BD Cranetech Pte Ltd – 106 International Road Singapore 629175
Project Engineer – February 19 2018 – September 03 2019
 Prepare, schedule , coordinate and monitor the assigned engineering projects
 Assisted in doing initial presentation to clients to give the technical Specifications of Gantry Crane Erection and Installation.
 Prepare Mobilization plan for the access delivery of Gantry Crane Components and pre cast beam from factory and workshop to site of erection and installation.
 Overall in charge for developing and preparing Lifting plan, Method Statement, Risk Assessment and Safe Work Procedure and ensuring the optimisation of Mobile and Crawler crane usage and weights of Gantry Crane and Pre cast beam components prior to erection and installation.
 Supervise over all Lifting activities such as Erection of Gantry crane, Temporary support propping beam, temporary steel structural bridges and Pre cast beam components at Zone coverage area of rail and bus depot.
 Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support
 Interact daily with clients to interpret their needs and requirements and represent them in the field.
 Review engineering deliverables and initiate appropriate corrective actions.
Fagioli Asia Pte Ltd-19 Jurong Port Road Singapore 619093
Project Engineer/Technician – March 7 2011 December 22 2017
 Prepare detailed lifting plans and draw temporary steel structure and customized lifting systems for installation of heavy machinery and equipment in various projects such as Power Plant, Shipyard and Civil Construction.
 Assist site manager in identifying on-site problems and engineer solutions. Also responsible for planning with client’s and other contractor’s project team on work schedule
DIRECT INVOLVEMENT IN THE
FOLLOWING PROJECTS
 JTC Logistic Hub, JTC Clean Tech 3, Integrated Care Hub, Schindler Lift, Shimizu Corp. – Design, fabricate and installation of Building Maintenance Units (BMU)
 T301 4 in 1 Rail and Bus Depot – 30T to 60T Gantry Crane Erection/ Operation and Pre Cast Beam installation.
 ExxonMobil Singapore – 802t HDA Reactor Transportation and Erection
 PSA International Pte Ltd Singapore – RTG and Quay Crane Load in Load out
 PT Waagner Biro Indonesia – Bridge Arch Span Lifting Drawing preparation
 MMHE-ATB Sdn. Bhd. Malaysia – Rapid Project Bullet Transportation and Stowage
 MISI SETIA Oil & Gas Sdn. Bhn. Malaysia – Exhaust Gas Stacks Lifting
 TECHNIP Indonesia – Yamal LNG Project Load in Load out
 EEI Corporation Philippines – Pagbilao Power Plant De-Arch Block Lifting
 Skyclimber Corporation Philippines – 2x150MW SLPGC Power Plant Chimney Liner Lifting
 Beng Soon Machinery Services Singapore – Tuas Power Plant 350t Boiler Lowering
 Arabian Bemco Contracting Co. Saudi Arabia KSA – PP10 HRSG 48nos. Module Lifting
 Sembawang Shipyard Pte. Ltd. Singapore – MV Shinyo Ocean A-Frame, Crankshaft and Bedplate Lifting
`
 Supervision of sub-contractors at their workshop to ensure the work is up to accepted standard
 Provide lifting and rigging arrangement drawing with specialized equipment involved in the transportation industry such as SPMT Scheuerle and Cometto, Liebherr Crawler and Hydraulic Cranes
 Calculate transport Loads on SPMT’s (Self Propelled Modular Trailers) and crane capacity.
 Set up and Operate Hydraulic Gantry and Strand Jack
 Undertake Refurbishment and Upgrades of existing equipment in order to extend their Economical life span and improve their capacity
 Assisted in Barge Preparations such as installations and Operation of Ballast Pumps, Supervision of Sea Fastening (Installations and Removal) prior to Roll on Roll off of oversized cargos using SPMT.
NatSteel Holdings Pte. Ltd. -No. 22 Tanjong Kling Road Singapore
Mechanical Engineering Technician -Dec. 15, 2008 – February 28, 2011
 Responsible for the safe maintenance and repair of all mechanical equipment in MSP/EMM Department (e.g. Hydraulics and Air System).
 Perform Inspection and Monitoring of Machines during production is ongoing.
 Carry out Preventive, Predictive and Schedule maintenance for the mechanical system / equipment.
 Performs daily maintenance check on Operating Equipment and Report / Rectify any abnormalities
 Trouble shoots breakdowns, diagnose faults and execute repairs.
 Carry out the static equipment maintenance during shut downs.
 Carry out minor, modification work on static equipment / piping for use in hazardous and non-hazardous location in accordance with safety regulation. Conduct job hazard analysis, review lifting plan and slinging work for the regular critical maintenance jobs.
DIRECT INVOLVEMENT IN THE FOLLOWING PROJECTS
 Sembawang Shipyard Pte. Ltd. Singapore – MV DB50 6 units Rolls Royce Thruster installation
 Kencana Torsco Sdn Bhd – A380 Hangar Lifting , Philippines
 Malaysia Marine and Heavy Engineering Pte Ltd – Lifting of 22000t Topsides with 64nos. of Strand Jacks for Gumusut Kakap Project Malaysia
 Malaysia Marine nad Heavy Engineering Pte Ltd – Load out of 43500te Gumusut Kakap FPS Malaysia
 Keppel Shipyard Ltd Singapore – MV Frontier Phoenix 25te 2units Thrusters Lowering and Lifting
 Singapore Salvage Engineering Pte Ltd – MV Noble Phoenix 25te 2units Thrusters Lowering and Lifting
TRAININGS AND SEMINARS ATTENDED
 Heavy Lift Specialist Seminar
Jalan Sultan Ismail, 50250 Kuala Lumpur Malysia
April 2 – 4 2019
 WSQ Supervise Construction Work Eversafe Consultants Pte. Ltd (Singapore)
February 15 ~ 18, 2018
 WSQ Perform Rigger and Signalman Tasks
NTUC Learning Hub Pte. Ltd. (Singapore) May 11 ~ 13, 2018
 WSQ Supervise Lifting Work Operations NTUC Learning Hub Pte. Ltd. (Singapore) May 29 ~ June 2, 2018
AU Optronics Corporation – 407 No.1, JhongKe Rd., Central
Taiwan Science Park, Taichung, Taiwan, R.O.C
Maintenance Assistant Engineer – Oct. 13, 2006 –
May 13, 2008
 Acted as a working leader of a small crew as
assigned; overseeing and coordinating the work.
 Responsible in implementing Preventive Maintenance
procedures according to prescribed schedules and
manuals.
 Perform the more complex maintenance and repair
of tools and equipment.
 Assisted in or coordinated personnel training as required.
 Coordinate with other technicians on maintenance
and repair and provides assistance and guidance to
operators when necessary.
 Responsible in electrical and mechanical installation
of new and modified parts of TFT-LCD sputter
machines.
SKILLS AND SPECIALIZATION
 Possess knowledge of Hydraulics and Pneumatics
System
 Hydraulic Strand Jack Operation
 Knowledge in Mechanical Engineering Drawing
using AutoCad and Autodesk Inventor (2D and
3D)
 Tig Welding Operation (Argon) and Arc Welding
 Independent with ability to work in a cross-functional
team
 Good analytical and problem solving skills
 Speaks and Comprehend Mandarin language
PERSONAL PARTICULARS
 Age : 44
 Date of birth : April 7 1975
 Gender : Male
 Height : 5’7”
 Birth place : Sta Maria Bulacan Philippines
 Marital Status : Married
Reason for living
Although I’m grateful for having had the opportunity
working in Inter Equip Supplies Pte Ltd. as my current company,
I am looking for a new challenge with better career growth
opportunities.
Current / last drawn salary Expected salary
SGD 3500 ++ SGD 3800++ and Negotiable
Notice Period
I am Available immediately
TRAININGS AND SEMINARS
ATTENDED
 Apply Workplace Safety and
Health in Process Plant
NTUC Learning Hub Pte. Ltd.
(Singapore) July 19, 2017
 Work at Height Course
Eversafe Consultants
Pte. Ltd (Singapore)
August 8, 2017
 Apply Workplace Safety and
Health in Construction Sites
Eversafe Consultants
Pte. Ltd (Singapore)
September 13, 2017
 Maintain and Repair Hydraulic
System FESTO Pte. Ltd.
(Singapore)
February 08 ~ 11,
2010
 Basic Welding 3G
Globaltec CERT Pte. Ltd.
(Singapore) February 01 ~ 05
 Safety Orientation Course
(Metal Working)
NTUC Learning Hub Pte. Ltd.
(Singapore) December 22, 2009
 Fundamental of Air Compressor
IngersollRand Asia Pte. Ltd.
(Singapore) June 03, 2009
 Autocad 2002
Microcadd Technologies
Co., Inc. March 25 ~ April 9,
2003
 Hydro Electric Power
Plant RLB Career
Development and
Technological Center
February 22, 1997
 Appreciation Course on
Pneumatics Technology
Technological Institute of the
Philippines, Quiapo, Manila
January 17, 1997
 Computer Aided Design in
Mechanical Engineering
Technological Institute of the
Philippines, Quiapo, Manila
September 20, 1996