Education

1991-2001 Secondary School Certificate. at Rangamati High School, Dinajpur.

2002-2006 Diploma-in-Electrical Technology. at Barishal Polytechnic Institute, Barishal.

2012-2016 B.Sc. in Electrical & Electronics Engineering. at Sonargaon University.

Experience

 20th October 2006 to 10th November 2007. Sub Asst. Engineer. (Service). at Power Plus Engineering Pvt. Ltd. Kajipara, Mirpure, Dhaka.

 12th November 2007 to 20th July 2011. Sr. Asst. Engineer. (Operation & Maintenance). at Energy Prima Ltd. (A sister concern of Hosaf Group) 50MW Rental Power Plant, Kumargaon, Sylhet. (GAS plant)

There have (1.5MW, 1906KVA, 1525kW, 2752A, 400V, 3 Phase, 50 HZ, 32 Units Model No- (16V4000G23), And there have also (1.2MW, 1500KVA, 1420KW, 2137A, 400V, 3 Phase, 50 HZ, 09 Units Model No-12V4000G23) MTU Diesel Generator of Germany. Diesel Generator Power Station having a production capacity of 50 MW.

I have worked at this plant of Electrical Department 33KV Sub-Station (33kV & 0.4KV Cable line successful completed of erection and commission in 2014, (Operation & Maintenance).

Successful completion of erection, commissioning and testing of 50 MW Diesel Generator Rental Power plant with the help of Germany and China expert Engineers and technicians 41 Units Diesel Generator of MTU Germany.
Trouble shooting of erection and maintenance of high voltage switch gear and equipment such as, Switch gear VCB (31.5kA, 40.5 kV), Isolator, Serge arrestor, Bus bar, CT (Rated Voltage 35kV, Current Ratio 40/1A, Out Put 15/15VA), PT (Rated Prim. Voltage 33/√3, Output 33/50VA). Operation and Maintenance of Auxiliary equipment’s such as ventilation fan (55kW & 4kw).
X-former (3600 KVA, 0.4KV, 63A/5196 A, DYN5),
Operation & maintenance of plant setup X-20 PLC system and SCADA system.
Overall responsibility of control room and engine room.
Schedule Maintenance of Diesel Generators Tappet and Bridge adjust.
Responsibility for the smooth operation of the process through system and physical observation.
Operation & maintenance of plant setup ABB 33KV switchyard.
Operation & maintenance of plant setup 3.6 MVA, 36KV Transformers.
Supervise and coordinate with the assigned technical attendance Team.
Erection, Commissioning, Troubleshooting, Operation & maintenance of Diesel Power Plant.
Operation & Maintenance of Plant Alfa Laval Fuel Separator System.
Prepare daily work schedule and make daily reports.

 21st July 2011 to 16th December 2013. Shift-in-Charge. (Operation & Maintenance). at DPA Power Generation Int. Ltd. 50MW Rental Power Plant. Army Camp, Pagla, Narayangonj. (Diesel Plant)

There have (0.5 MW, 680 KVA, 544 KW, 440V, 3 Phase, 50 HZ, 120 Units) MTU V-type 1600 Series Diesel Generator of Germany.

 Erection, Commissioning, & maintenance of Diesel Power Plant.
 Prepare daily working reports.
 Overhauling, fault diagnosis & trouble shooting of Diesel Engines.
 I will do independently, as well as teamwork, I had worked on below Engines exclusively used in Power generation Engines of low, medium and high speed Engines like MTU- 12 Cylinders, V type (1600 Series) Diesel Engine.
 Ensure & supervise all Engine& Auxiliaries of whole plant and Ensure that the checking of Control Systems for Proper Operation before Starting the Engine.
 Firefighting& Fire Deduction System.
 Operation, Maintenance & of Plant Oil Separator System.

 17th December 2013 to 13th May 2018. Sr. Engineer. (Operation and Maintenance). at V-POWER Group. (Honkong) Primordial Energy ltd. 50MW Rental Power Plant, Pagla, Narayangonj. (Diesel Plant)

There have (1.5MW, 1906KVA, 1525kW, 2752A, 400V, 3 Phase, 50 HZ, 32 Units Model No- (16V4000G23), And there have also (1.2MW, 1500KVA, 1420KW, 2137A, 400V, 3 Phase, 50 HZ, 09 Units Model No-12V4000G23) MTU Diesel Generator of Germany. Diesel Generator Power Station having a production capacity of 50 MW.

I have worked at this plant of Electrical Department 33KV Sub-Station (33kV & 0.4KV Cable line successful completed of erection and commission in 2014, (Operation & Maintenance).

Successful completion of erection, commissioning and testing of 50 MW Diesel Generator Rental Power plant with the help of Germany and China expert Engineers and technicians 41 Units Diesel Generator of MTU Germany.
Trouble shooting of erection and maintenance of high voltage switch gear and equipment such as, Switch gear VCB (31.5kA, 40.5 kV), Isolator, Serge arrestor, Bus bar, CT (Rated Voltage 35kV, Current Ratio 40/1A, Out Put 15/15VA), PT (Rated Prim. Voltage 33/√3, Output 33/50VA). Operation and Maintenance of Auxiliary equipment’s such as ventilation fan (55kW & 4kw).
X-former (3600 KVA, 0.4KV, 63A/5196 A, DYN5),
Operation & maintenance of plant setup X-20 PLC system and SCADA system.
Overall responsibility of control room and engine room.
Schedule Maintenance of Diesel Generators Tappet and Bridge adjust.
Responsibility for the smooth operation of the process through system and physical observation.
Operation & maintenance of plant setup ABB 33KV switchyard.
Operation & maintenance of plant setup 3.6 MVA, 36KV Transformers.
Supervise and coordinate with the assigned technical attendance Team.
Erection, Commissioning, Troubleshooting, Operation & maintenance of Diesel Power Plant.
Operation & Maintenance of Plant Alfa Laval Fuel Separator System.
Prepare daily work schedule and make daily reports.

13th May 2018 to till to date. Engineer. (Electrical). at Power-Energy Management and Engineering Company Ltd. (PEMEC). Payra 1320MW Thermal Power Plant, Kolapara, Patuakhali, Bangladesh.

From 13th May,2018. to till date and has been working as an Electrical Engineer (Consultant) under consulting farm of Power-Energy Management and Engineering Company (PEMEC), of Bangladesh-China Power Company (Pvt) Ltd of Payra 4X660 MW Thermal Power Plant (COAL Fired), Payra, Dhankhali, Kalapara, Patuakhali, Bangladesh under North-West Power Generation Company Ltd.

• Plant Capacity: 1. Payra 4X660MW Thermal Power Plant (1st & 2nd phase).
Supervised, Inspected, Checked the following work’s as per RFC Drawing and signed the RFI for next activities:

 Overall lighting for plant area road.
 To supervise and execute of ongoing Electrical works such as lighting installation, earthing mesh installation and Electrode installation both (Horizontal and Vertical) and lightning protection system installation whole plant equipment roof to grounding mesh connection and CW pipeline Cathodic protection checked as per RFC drawing.
 Lighting and Lightning protection installation checking for Employer’s and Engineer’s building, Street lighting, Administration building, Boiler House, Bunker Bay, Turbine & Generator hall, E.S.P, 132/11kV Sub-Station, Water treatment Plant area, Coal handling and coal conveyor system area and where necessary with the entire satisfaction of the management.
 Transformer and Generator installing and testing.
 Transmission and Distribution line system.
 400kV (GIS),132kV, 33KV Sub-Station and 11KV (11kv main incoming, DW water area and CCB area), 415V Switchgear (Unit#1, Unit#2, Round coal yard, CCB, CHP, DM water & Jetty area) Installing and Commissioning (as per RFC & Manufacture Manual).
 Supervision of construction of CT, PT, Relay, Circuit Breaker, LA, Power Transformer 11/.415kv Busbar, All HT and LT Cable Laying Sub-Station to sub-station into the Bus-Bars system.
 Inspection and Checked segregated phase bus duct from Generator to 270MVA, (22/400KV) Step-up Transformer and from 400KV Outgoing to Gantry, Gantry to GIS and GIS to Gantry to Shunt Reactor to Gantry for outgoing to PGCB grid line.
 From SST and UAT 22/11KV switchgear cabinet room NSBD Inspection and Checked witness during testing.
 Inspection and checked 11KV, 415V, Switchgear Cabinet and cable laying as per RFC Drawing.
 Conducted 11KV and 415V Switchgear commissioning and testing including all electrical equipment and dry type Transformer and different location where installed. After satisfaction testing and Commissioning, Energized the all Switchgear and Distribution Transformer for Auxiliary supply.
 Review as build designs on electrical works related to Generator, Transformer, Switchboards, Cabling and Bus-Bar Arrangement
 Prepare a working report on weekly, 15Day’s monthly basis and Submit to site construction Manager (SCM).