2009 – Present, APAVE SEE

EXXON MOBIL – CHAYVO, SACHALIN 1, Russia – Visual L1 Inspection on Onshore and Offshore Facilities, ( Coating Integrity Assessment, Fireproofing Inspection, Cladding Condition Assessment, External Structural and Pressure Equipment Inspection, Dead-leg and Stagnant Zones Identification and Assessments, CUPS Identification and Assessments, Mix and Injection Points Assessments and Identification, Corrosion Under Fireproofing Assessments, Galvanic Corrosion Survey,  Inspection of Flexible Hoses and Potentials of Drop Objects.

EEPCI – EXXON MOBIL, KOME 5, Chad – Performing corrosion mapping scanning on surface of the various tanks, (Emulsion Tanks, Crude Oil Tanks and Produced Water Tanks) with RMS (Rapid Motion Scanner).

AES – VCM Mong Duong 2, Can Pha City, Vietnam – Inspection was done at Thermal Power Plant – U1 and performing ACFM Inspection on pipeline welds for Hot Reheat System (HR), Cold Reheat System (CR), Main Steam Pipeline (MS) and Boiler Feed Water Line (FW) during the shutdown activities.

Waggonbau Niesky, Germany – Quality control for manufactory of different models of wagons and bogie frames. Checking the qualification and documentation of the PQR and WPS according with code requirements. Destructive and non destructive testing to monitor compliance and mechanical characteristics of the various metals used in the manufacture of wagon models and bogies frame.

Petkim, Turkey – Performing Tube Inspection on vertical heat exchangers, the inspection was undertaken to determine the overall condition of the tubes within the HE. Remote Field Technique/electromagnetic technique was used and RVI remote visual inspection for visual verification of the findings.

• Analyzing and reporting from collected data.

Shell, Gabon – Plant Inspector, Performing Visual and UT thickness measurements on Tanks , Pressure Vessels , In-Service Pipe Line Inspection , Performing  MPI , DPI and UT on the welds.

Executing external, internal & on-stream inspections, shutdowns of pressure vessels, vessel internals, columns/Towers, separators, storage tanks, exchangers, on/off plot piping for defects, thickness monitoring for corrosion calculations, corrosion loops, remaining life, Failure investigation, intelligent pigging, etc.

• Authorized permit applicant and holder for Shell Gabon.

• Authorized and SAP trained personnel for Shell Gabon.

Total, Friedlander, Ponticelli, Gabon – Performing PQR and QS qualification for welders with VT, and UT inspection.

Total, Ponticelli, Gabon – Offshore Inspection on the structure construction on the Oil and Gas platform with VT, PT, MT, UT and UT thickness.

Total, Friedlander, Gabon – Offshore Inspection on the structure construction on the Oil and Gas platform with VT, PT, MT, UT and UT thickness.

Shell, Rabi, Gabon – Performing Corrosion Mapping Inspection on the surface of the Oil Tank with RAPID MOTION SCANNER (RMS).

KEK, Kosovo, Pristina   – Providing Visual Inspection on the pipes with Video Endoscope (Boroscope).

RUEN, KOCHANI, Macedonia – Performing Ultrasonic Thickness Inspection on pressure vessels.

AMPCO, Malabo, Equatorial Guinea –  Performing MT, PT, VT on different kind of welds; PV inspection on tanks, reservoirs, heat exchangers; thickness and hardness measurements; inspection on TKY joints with UT. The inspection was performed according to ASME and API codes.

ALGOA, Malabo, Equatorial Guinea – Providing NDT inspection VT, PT and MT on the reparation of the heater boilers and pipelines.

EG LNG, Malabo, Equatorial Guinea – shutdown project – Providing PT, internal VT of vessels, UT wall thickness of the pipelines defined by the RBI program.

OKTA – Hellenic Petroleum Refinery, Skopje, Macedonia – Providing MT, UT inspection on tanks, pressure vessels, reservoirs; Detailed in service pressure vessel inspection according PED 97/23 and API and performing various NDT tasks.

ExxonMobil, N’djamena, Chad – NDT Inspector performing series of UT inspections (wall thickness measurements) in Chad.  Providing UT inspection for Corrosion Monitoring on vessels and piping.

GAMA, Skopje, Macedonia – Performing Visual Testing, Ultrasonic Testing on the pipeline welds.

MEPSO, Skopje, Macedonia – Performing Visual Testing, Thickness Measurement and Magnetic Particle Testing on Hydro Testing Compressed – Air Tank.

The Welding Institute – JUG, Skopje, Macedonia – NDT Inspector providing Penetrant and Visual Inspection on steel constructions and tanks.

TE – TO Power plant, Macedonia – NDT inspector providing Penetrant and Visual Inspection on different types of pressure vessels, tanks, pipes and pipelines.