Noel Mendoza Cueto

Blk 21 Lot 2 Guerrero Street San Isidro Village II, Batangas City
Batangas, Philippines 4200
Email : [email protected]

Current Location: Saudi Arabia
Availability: I can start for work with three month notice.

PERSONAL DATA
Age:
44
Date of Birth:
Oct 18, 1973
Gender:
Male
Civil Status:
Married
Height:
160 cm
Weight:
60 kg
Nationality:
Filipino
Religion:
Catholic
Permanent Address:
Block 21 Lot 2 Guerrero Street San Isidro Village II, Batangas City
Batangas  Philippines 4200
WORK EXPERIENCE
I have been working for 20 year(s).
1.
Position:
Senior Electrical Technician
Duration:
Aug 11, 2011 – Present
Company:
Saudi Chevron Phillips Chemicals
Company Industry:
Oil / Gas
Location
Jubail Saudi Arabia
Department:
Maintenance
Job Description:
• Pre- commissioning, checking and troubleshooting of electrical equipment plant wide of Ethylene and Utility Area.
• Attend equipment PSSR prior for equipment unit start up
• Energized and checking of electrical equipment ranging from 480V, 13.8KV, 34.5KV and above prior for first start-up of equipment inside and out of Substation.
• Attend/Conduct walk down and punch listing of each area in the plant.
• Generate PM procedures, and execute the task as required and schedules
• Coordination and work with ESP vendor for accurate and correct equipment settings prior to process gas operations.
• Took /review as built drawing for every equipment, relays settings and coordination with operation for process start up.
• Troubleshooting of Hitec DUPS (Dynamic Uninterruptible Power Supply) MARELLI GENERATOR, INDUCTION COUPLING, FREE WHEEL CLUTCH, with MTU Diesel Engine as Prime mover, AUTOMATIC VOLTAGE REGULATOR and other auxiliary.

• Lead the group of technician for everyday work task, giving assignment direction, coordination with operation and Supervise regular work activities as required.
• Attend/coordinate with contractor in ATS modification and testing of Switchgear, rack in rack out and LOTO/LTT.
• Attend /completed compliance training including opening and closing work permit.

• Energized, switching, transfer load of transformer when necessary for priority and planned job.

• Expedite material / coordination with warehouse for update level of material stock.
• Attend / do site inspection with operation in conducting JSA prior to permitting and starting critical job.
• Develop Equipment Preventive Maintenance (PM) Plans as needed or requested
• Maintenance Shop & Craft Equipment & Tool Specification/Selection
• Set-Up Maintenance Shop Facilities and equipment power supply.
• Develop Standard Maintenance Procedures (SMPs) – or equipment procedures – review or development of list needed for future
• Participation in commissioning and start-up of critical equipment or system
• SAP knowledge, raising notification, work confirmation / closing orders of the task and job that has been completed, material reservation, and planning, BOM, equipment spare parts review.
2.
Position:
Electrical Technician
Duration:
Oct 25, 2007 – Jul 6, 2011 (3.7 years)
Company:
Rabigh Refining And Petrochemical Company
Company Industry:
Oil / Gas
Location
Rabigh, Kingdom Of Saudi Arabia
Department:
Electrical Maintenance
Job Description:
• Carry out day to day routine inspection on daily progress of the job by contractor.
• Inspection, punch listing and weekly reporting to supervisor all the daily activities in the designated areas of plant.
• Maintenance of equipment which are due and scheduled. Familiarization of equipment and function, i.e. AREVA, GE, SEIMENS, TOSHIBA protection relays, substation transformers, transfer scheme of switchgears, UPS, Battery charger, motors starter, spare parts, MTU generators testing and other related jobs.
• Receive and review documentation of handover material as requirements and prior to approve the Mechanical Completion Certificate (MCC).
• Attend seminars and training prior to familiarize maintenance, operation of equipment in the plant.
• Review and check as built 4.16KV, 13.8KVelectrical drawings of the substation and equipment, modification of controls such as VFD or FREQUENCY CONVERTERS, parameters checking testing and commissioning of controls and ensure the reliability of equipment prior to handover to end user.
• Work as a start-up technician and shift electrical technician of plant wide such HOFCC, Ethane Cracker, POX, MEG, Refinery A/B and Petrochemical complex PP1/2, PE1/2, HDPE, BU1.
• Lead the contractor technician for various jobs in the plant.
• Receives work assignments, briefing and guidance from senior section and engineering personnel, and plans and arranges the manpower and material assigned for the job and prepares these for the day’s activities.
• Receives the PTW from the MFT section or Operation personnel and executes the job in a safe and effective manner.
• Ensures that the High and Low Voltage equipment released is safe for normal operation and attends/requests toolbox meetings wherever essential to ensure safe execution of a job.
• Carry out preventive maintenance activities based on SAP work orders, and carry out skilled maintenance, repair and testing of electrical equipment.
• Participate in the assigned plant shutdown activities and ensure timely completion of job activities.
• Comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.
• Provide work direction and instruction to the contractor craftsman.
• Verify completed maintenance activities and ensure that the job is performed as per requirement and complete the maintenance activity sheet.
• Collect technical data from the field if requested by supervisor or by the other senior staff.
• Identify areas for improvement in the activities performed and assist the senior section personnel to carry out modifications and improvements to the system.
• Carryout visual inspection and be vigilant to identify any developing problem in the area assigned, and report any problems to relevant supervisor.
3.
Position:
Shift Electrical Technician
Duration:
Jun 9, 2002 – Sep 30, 2007 (5.3 years)
Company:
Saline Water Conversion Corporation
Company Industry:
Government
Location
Jubail Saudi Arabia
Department:
Maintenance Electrical
Job Description:
Responsible in troubleshooting, fault finding, corrective maintenance, routine maintenance, calibration of protection relays ie; overcurrent, ground fault, under voltage, lock out, differential relays, synchronizing check relay and other protective relays in the plant, ie Fabrica  Italiana, Merlin Gerin Static relays, Alstom, GE Multilin 239 motor protection. Responsible in modification of circuitry as per approved by the committee and reviewing modification of SJI (standard job instruction). Online / field calibration of FCV / MOV setting the correct signal 4-20mA as close and open position. Troubleshooting, loop checking, faultfinding, of pneumatic and electronic instrument fault. Calibration setting of electronics instrument and pneumatic equipment as associated by the electrical circuitry. Oil sampling from 230KV/13.8kv Main Transformer and Auxiliary Transformer 13.8kv/480V and oil filled cable of 230KV power lines.
4.
Position:
Shift Electrical Technician
Duration:
Oct 20, 1999 – Jun 5, 2002 (2.6 years)
Company:
JG Summit Petrochemical Corporation
Company Industry:
Chemical / Fertilizers / Pesticides
Location
Simlong  Batangas Philippines
Department:
Electrical Maintenance
Job Description:
Carry out day to day repair, troubleshooting of electrical and instrument equipment.
Responsible as a shift electrical technician on duty for the whole operation of the plant.
Maintenance of electrical equipment, instrument and other related jobs.
Attend trouble calls during operation shutdowns.
Assistance to operation during start-ups
Faultfinding and modifications of circuitry.
Troubleshooting of electrical equipment and other associated controls such as PLC S5, S7 Siemens.
Implement carry out task assigned by the Supervisor and ensure that the task were done according to established procedures / instructions.
5.
Position:
Shift Electrical Technician
Duration:
Jan 29, 1999 – Oct 20, 1999 (0.7 years)
Company:
CMI Contractor / JG SUMMIT PETROCHEMICAL CORP.
Company Industry:
Polymer / Plastic / Rubber / Tires
Location
Sta. Rita Batangas / Simlong Batangas Philipppines
Department:
Maintenance
Job Description:
Work as a shift electrical technician on duty.
Receiving power from power plant during power failure shutdown by following work instruction.
Isolation / de isolation of electrical equipment load ranging from 5000KW and below.
Assisting to operation during star- up for any abnormalities in starting of equipment.
Preventive maintenance of switchgear and other MCC.
Checking / monitoring of incoming voltage, frequency at all MCC and switchgear.
Attend to all trouble calls from operations.
6.
Position:
Electrician
Duration:
Oct 15, 1996 – Nov 20, 1997 (1.1 years)
Company:
Summa Kumagai Inc. / Tacophil
Company Industry:
Heavy Industrial / Machinery / Equipment
Location
Legaspi Village, Makati Manila Philippines
Department:
Electrical
Job Description:
Work as an electrician of constructing company.
Establish control panel for different kind of electrical equipment.
Laying / Cable pulling of feeder cables from substation to equipment on site.
Installation of electrical equipment such as motors and control.
Do the punch list item and modify as per drawings and address.
7.
Position:
Electrical maintenance / operator
Duration:
Jul 16, 1994 – Apr 19, 1996 (1.8 years)
Company:
Behavior Tech Computer Corporation
Company Industry:
Electronics & Semiconductors
Location
Chung-Li Taiwan
Department:
Maintenance
Job Description:
In charge of maintaining the equipment, assuring that all in good operating conditions, responsible in lining up the equipment and test elements, reports all the status of defects, works that has been taken and records all activities that was done.
 

EDUCATION

Highest Education
Second Highest Education
Education Level:
Bachelor’s / College Degree
High School Diploma
Education Field:
Engineering(Electrical/Electronic)

Course:
Diploma of Technology
High School Grad
School/University:
Batangas State University Formerly P.B.M.I.T
Pinamucan National High School
Location:
Batangas City
Batangas City
Date:
May 1990 – Apr 1993
1986 – 1990
LICENSES/CERTIFICATIONS

License/
Certification
License/
Certification No.
Date
1.
Registered Master Electrician
0050673
Dec. 7, 2016
SKILLS

Skill
Years of Experience
Remarks
1.
computer
5
word, excel, power point
TRAININGS/SEMINARS
Date
Topic/Course Title
July 8, 2013

Nov. 5, 2012

April 05, 2014
SAP MM & PM Module Training

WO Closing, Tech Completion

IELTS General Training
Britsih Council
Al-Khobar KSA
Apr 6, 2008- Apr 9, 2008
PdMA MCE Max
Mr. Mark Williams ( PdMA Corp. )
ARAMCO TRAINING CENTER, RABIGH K.S.A
Mar 8, 2008- Mar 12, 2008
CHLORIDE UPS AND BATTERY CHARGER
MR Boris Rosero ( Chloride UPS / BC )
ARAMCO TRAINING CENTER, RABIGH K.S.A
Dec 2007
LOCK OUT TAG OUT
HITACHI UO1 PROJECT PETRORABIGH
PETRORABIGH RABIGH, SAUDI ARABIA
Mar 29,- Apr 1, 2008
AREVA T&D Protection Relays
Areva
ARAMCO TRAINING CENTER, RABIGH K.S.A
– 2007
Basic Rescue
SWCC
SWCC SAFETY OFFICE JUBAIL SAUDI ARABIA
– 2006
ON LOAD TAP CHANGER OVERHAULING
ABB
SWCC SAFETY OFFICE JUBAIL SAUDI ARABIA
– 2001
BASIC INSTRUMENTATION
JGSPC
JG SUMMIT PETROCHEMICAL CORP. PHILIPPINES