Photo

Reynaldo Roño Electrical Technician in Rolling Stock Maintenance

Kingdom Saudi Arabia

Reynaldo Roño

Present Address: Gulf Park Suites P.O. Box 5376- Dammam 31422 Kingdom of Saudi Arabia Dammam Corniche, Beside Al-Shatie Mall

Hometown Address:    Blk. 27 Lot 1 Phase 3 San Vicente Homes Subdivision

Sta Maria Bulacan Philippines

Mobile No. +966 537506566

Email:    [email protected]

Skype:    reynaldorono

Position: Electrician, Rolling stock Maintenance Technician

Objective:

Pursuing for a position in Industrial & Building Electrical Installation & Maintenance in Construction and Rail industry in which I can utilize and build upon my current knowledge of modern Electrical / Mechanical and Electro-mechanic rail maintenance.

Experience:

Electrician Technician, Rolling Stocks Maintenance – Oct. 8, 2015 –TO- Present

CAF ARABIA Co. – Service Contractor And Maintenance Provider of Saudi Railway Organization (SRO)

Company Address: Saudi Arabia, Riyadh, Hassan Ash shawri St., 3322 Riyadh 12844 – Wasel 7317

Contact No. – +966 11 4763797 Ext: 105 Fax: +966 11 4763796

Responsibilities:

Perform day to day running maintenance and unscheduled repair to a fleet of Push -Pull Locomotives High Speed Train
Responsible of Push-Pull High Speed Locomotive Train for Daily Maintenance Unit (DUM) which is Engine and Converter, Main Compressor, Roof and Under-frame, Gearbox Oil, Brake Pads, Front Coupler, Driving Cab, Brake & Traction Test, Operational Equipments, Interior & Exterior, Waste Discharging & Water Filling, and Sand Ingress Inspection (Power Car or Locomotive cleaning)
Perform to Operate of Underfloor Wheel Lathe Machine (UFWL)

Leadman Technician/Electrician, Rolling Stocks Maintenance – July. 5, 2015 – TO – Oct. 7, 2015

SBI – CB & T Incorporation – Service Contractor Maintenance of Metro Rail Transit MRT Line 3 System

Responsibilities:

Responsible to leads in trouble-shooting of Light Rail Vehicle (LRV) Regarding Air Conditioning Unit to minimize the failure and exceeded and high rate of unscheduled removal, train drivers reported defects.
Responsible to repair or replace of Air-condition Unit and trouble shooting due to failure and defects.
Responsible of day-to-day operation of Light Rail Vehicle (LRV) MRT 3 System.
Submit progress report to the engineers / supervisor to expedite resolution in order to attain high Maintenance standard

Leadman Technician/Electrician, Rolling Stocks Maintenance – October. 19, 2012 – TO – July. 4, 2015

Autre Porte Technique Global Incorporation – Service Contractor And Maintenance Provider MRT 3 System

Responsibilities:

Responsible to leads in trouble-shooting of Light Rail Vehicle (LRV) Regarding Air Conditioning Unit to minimize the failure and exceeded and high rate of unscheduled removal, train drivers reported defects.
Responsible for six month & two years maintenance schedule and trouble shooting due to failure and defects.
Responsible and in-charge of Dynamic Test Run from six months and two years maintenance schedule.
Responsible of day-to-day operation regarding overhauling of Light Rail Vehicle (LRV) MRT 3 System.
Submit progress report to the engineers / supervisor to expedite resolution in order to attain high
Maintenance standard.

Senior Technician/Electrician, Rolling Stocks Maintenance – July. 02,2001 –TO- Oct.19, 2012

TES Philippines Incorporation – Service Contractor And Maintenance Provider MRT 3 Electrical System

Responsibilities:

8 Years Maintenance / Overhaul: Check & Calibration of Pantograph, Line Contactors, Apparatus & Electrical Boxes, and Doors. Trouble shooting of new overhauling cars. Installation and replacement of new traction motors, new track brakes, brakes valve measurement, electrical apparatus boxes, check new termination and auxiliary contacts bolts and nuts if good condition. Functional Testing and Energizing, Low Speed Testing and High Speed Testing at Mainline.
2 Years Maintenance: Check & Calibration of Pantograph, Line Contactors, Apparatus & Electrical Boxes, and Doors. Installation of Bogies A to D and termination of electrical wires, Installation and replacement of new traction motor, new track brakes and brakes valve measurement, electrical apparatus boxes, check new termination and auxiliary contact bolts and nuts if good condition. Functional Testing and Energizing, Low Speed Testing and High Speed Testing at Mainline.
6 Months Maintenance: Installation and replacement of traction motor, carbon brush, trouble-shooting of electrical boxes, check terminal bolts and nuts re-tightened if necessary. Check high-tension wire if in free position check bogies, shunting cable, drain plug, and electrical wirings.
Emergency Works: Replacement of traction motor installation of traction motor bogies inspection, wheel inspection electrical troubleshooting if necessary.
Air Condition Unit: Installation and replacement of Air Condition Unit, troubleshooting the electrical condenser fan motor and evaporator fan motor and evaporator coil, system if necessary, check controller and contactors, breakers and replacement of condenser fan motor, evaporator fan motor, and evaporator coil.

Skilled Electrician, Electrical Industrial & Building Installation – March 15, 1999 –TO- January 6,2000

Kinden Philippines Corporation – Electrical Contractor

Responsibilities:

Responsible layout as per plan on slabs, walls and ceilings.
Responsible prepare sketches as per blue prints in determining the location of wiring and equipment to ensure quality of work and follow safety rules and regulation.
Responsible Installation of electrical wiring to equipment and fixtures based on job specification in conformity to the Philippines Electrical Code.
Responsible read and execute electrical plan.
Responsible Installation of cable tray/wire way and cable ladder including pipe bending.
Testing and Commissioning of electrical lighting and auxiliary system.
Responsible to connect wires to all circuit breakers transformers and other components.
Assemble, install, test and maintenance of electrical wiring, equipment and fixtures using hand tools and power tools
Responsible place conduit (Pipes or Tubing) inside designated partition walls or others concealed areas and pulled insulated wires or cable through the conduit to complete circuits.
Responsible re-checking and lightning of all electrical bus bar bolts and screws of electrical panel boards.
Responsible to comply with safety rules regulations and prohibitions.
Responsible the recorded punch list work in the electrical works done

Electrician, Electrical Building Installation & Maintenance – November 16,1995 –TO- December 15.1998

Hypervolt Contractor Corporation – Electrical Contractor

Responsibilities:

Responsible of building electrical works such as installation, of piping conduit, boxes, wiring devices, panel board, circuit breakers, lighting powers, motors, low voltage switchgear & transformer.
Responsible places conduit (pipes or tubing) inside designated partition, walls, or others concealed areas, and pull insulated wires or cable through the conduit to complete circuits between boxes.
Responsible for testing and energizing of electrical system such as control panel, lighting, powers, motors, low voltage switchgear, and transformer.
Responsible for commissioning of building electrical works system particularly lighting, power, and auxiliary system, which includes fire alarm, motors, control panels, switchgear, transformer and generator set.

Electrician – Electrical Building Installation – January 28,1992 –TO-July 24.1995

Romago Incorporation Philippines – Electrical / Mechanical / Engineers Contractor

Responsibilities:

Responsible plan layout and installation of electrical wiring, equipment and fixtures, based on job specification and local codes.
Responsible prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformances to building and safety codes.
Responsible place conduits (pipes r conduit) inside designated partition, walls or other concealed areas and pull insulated wires or cables through the conduit to complete circuit between boxes.
Responsible work from ladders, scaffolds and roof to install maintain or repair electrical wiring, equipment and fixtures.
Responsible connect wires to circuit breakers, transformers and other components.
Responsible use variety of tools and equipment such as power construction equipment, measuring devices, power tools and equipments including oscilloscopes, ammeters and test lamps.
Responsible fasten small metal or plastic boxes into walls to house electrical switches or outlets.
Responsible repair or replace wiring and fixtures using hand tools and power tools.
Responsible test electrical system and continuity of circuit in electrical wiring, equipment and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes to ensure compatibility and safety of system.
Responsible diagnose of malfunctioning of system, apparatus and component, using test equipment and hand tools, to locate the cause of breakdown and correct the problem.
Responsible inspect electrical system and components to identify hazards, defect and the need for adjustment or repair and to ensure compliance with codes.
Responsible recorded punch list works in electrical work done.

Seminars / Training:

Electrical Installation And Maintenance EIM NC III – June – August. 2014
Mechatronics Technologies Corporation

Maintenance Refresher Training for LRV–12T HVAC – March.2013
THERMO KING INGERSOLLRAND

Human Machine Interface Application Demo – Nov. 2012
Mechatronics And Robotics Society of the Philippines

Mechatronics Servicing NC II – June. 2012
Mechatronics Technologies Corporation

Personal Computer Operation – Sept. 2010
Xavier Technical Training Center Corporation

Forkclift Operation and Maintenance First Safety System Training Services – Sept. 2010
TES Philippines. Incorporation

Basic Electronics – Aug – Sept. 2005
Meralco Foundation Institute

Motor & Transformer Rewinding – July  – August.1995
Meralco Foundation. Incorporation

Other Information:

Electrical Workers Registration Board (EWRB) – Sept. 2014
New Zealand

NATIONAL CERTIFICATE NC III Electrical Installation And Maintenance NC III – Jan. 2014-Jan 2019
Technical Education and Skills Development Authority TESDA

NATIONAL CERTIFICATE NC II Mechatronics Servicing NC II – Jul. 2012
Technical Education and Skills Development Authority TESDA)

Certified of Recognition for Attaining of 10 Years of Loyal Services – Dec.2011
TES Philippines Incorporation

Certified of Recognition for Attaining of Zero Tardiness – Dec. 2009 and 2010
TES Philippines Incorporation

Building Wiring Electrician Eligibility – Oct. 2010
Civil Service Commission

NATIONAL CERTIFICATE NC II Building Wiring Installation NC II – March. 2008
Technical Education and Skills Development Authority TESDA

Certified of Building Electrician (B+) – Feb. 2008
Executive Technical Consultant Trade Test and Training Center Incorporation

Skills:

Preventive and Corrective
Installation and Repair
Testing Commissioning of Electrical System
Overhauling and Troubleshooting
Reading Electrical Schematic Blueprints
Working Under Time Pressure
Forkclift Operation
Computer operation

Education:

Industrial Electricity – November 1990
Guzman Institute of Technology De Guzman St., Quiapo Manila Philippines

Practical Electricity – March. 1990
Torres Vocational School Juan Luna St., Tondo Manila Philippines

Manuel L. Quezon High School – March. 1987
Blumenttrit St., Sta Cruz Manila Philippines

Melchora Aquino Elementary School – March. 1983
Solis St., Tondo Manila Philippines

Personal Information:

DOB, August 19,1970
Single with two child
Interest, challenging in any field
Hobbies playing basketball, and work out gym

Character References:

Name: Mohammad Hechelef
Position: Project Manager

Company: CAF ARABIA Co. Kingdom Saudi Arabia

Name: Mohammad Badawood
Position: Project Supervisor

Company: CAF ARABIA Co. Kingdom Saudi Arabia

Name: Melvin Capistrano
Position:  Group Head – Rolling Stocks Department / Heavy Maintenance Section

Company:  Autre Porte Technique Global Incorporation Philippines

I hereby to certify of my information is true and correct on behalf of my knowledge.

 

 

Reynaldo R. Roño

Education

1990 Industrial Electricity at Guzman Institute of Technology

Experience

Oct. 8,2015 - Present Electrical Technician ,Rolling Stock Maintenance at CAF Arabia Co.