RICKY Tamayo PATA

Purok-5, Barangay Mapalad Arayat

Pampanga, Philippines

E-mail address: [email protected]

Contact No.: +639663610153, +639454085435

Career Objective:

To work and grow in a challenging environment used to add value to the organization, which demand sheer hard work and responsibility and justify my potential to establish myself as a competent person and work to achieve the goal of the organization
Position Applied For: SAPMT ELECTRICAL SITE SUPERINTENDENT

EMPLOYMENT HISTORY

QC ELECTRICAL INSPECTOR─WITH SAUDI ARAMCO SAP NO.:70016178

QC-Electrical Inspector, May 2008 – Present
Closed awareness & understanding of Saudi Aramco Engineering Standards & Procedures for Electrical (SAES,SAEP-122,SAER 1972,SAMSS,SATIP,SAIC,SATR) and other International industry Code & Standard

Approved QC Electrical Inspector by Saudi Aramco (Shaybah Support Facilities)

Approved QC Electrical Inspector by Saudi Aramco (Shaybah Project Oil and Gas)
Approved QC Electrical Inspector by Saudi Aramco (Manifa Project Oil and Gas)
Approved QC Electrical Inspector by Saudi Aramco Facilities (Tanajib Project)
Office Address: 6862 AL Amir Musaid, Ash Shamaliyah Al-Khobar 34427-3531 Cross 7/8, Front of Diet Center

WORK EXPERIENCE:

SINOHYDRO COMPANY LIMITED

•    SHAYBAH SUPPORT FACILITIES

March 22, 2016 to March 22, 2018

–       Contract No.: 6600033898

–        BI No: 10-00614-0004

Duties and Responsibilities:

Ø  Preparation of Project Record Book

Ø  Preparation for Electrical Equipment Energization Package

Ø  Material receiving Inspection

Ø  Conduct site inspection and ensure all electrical installation must comply with the design specifications as per

drawing and applicable standard

Ø  Coordinate and prepare various documents such as test, inspection reports, excavation permits, safety approval prior to implementation of work.

Ø  To assist and coordinate with the sub-contractor, Supervisor staff to plan co-ordination and control work activities in accordance with approved drawing work method / inspection & specification requirement etc.,

Ø  Verification of Inspection Readiness before issuing RFI

Ø  Keeping the files/Inspection Records always updated

Ø  Highlighting all discrepancies/anomaly detected during monitoring inspection and informing the same to QC   Manager.

Ø  Initiate NCR as required in consultation with QC Manager.

Ø  Follow up of corrective and preventive action for NCR issued and verification of effectiveness of the same.

Ø  Taking immediate remedial to clear inspection log book comments

Ø  Submitting daily report to QC-Manager at the end of each day of work.

Ø  Sole responsible for all Quality Control Activities for the allotted area of discipline.

Ø  Verification of materials supplied with that of material submittal

Ø  Supervise the work under as per specifications and standards.

Ø  Study and analyze the design/sketch plan which include the materials breakdown given by the client for execution of the project.

Ø  Review Design and development of one line diagram, preparation of electrical equipment specifications, identifying hazardous areas.

SAMSUNG ENGINEERING, SAUDI ARAMCO PROJECT

•    SHAYBAH INCREASE GAS HANDLING CAPACITY PROJECT

March 22, 2014 to December 2016

–       Contract No.: 6600023163

–        BI No. : 10-00905-0002

Duties and Responsibilities:

Preparation Project Record Book

Ø  Preparation for Electrical Equipment Energization Package

Ø  Material receiving Inspection

Ø  Initiate remedial or corrective action based on standard, code, and specification and verify the closure of NCR.

Ø   Invite client/contractor for witness and hold points in Inspection/Test.

Ø  Coordinate and assist construction to resolve any encountered problems related to inspection and testing activities to meet schedule and avoid any delay of activities.

Ø  Ensure the effective coordination with the client related to inspection, testing activities and documentation

Ø  Prepare internal punch list and coordinate with the construction prior for inspection.

Ø  Review work procedures and method statements for compliance with the good work practices and the costumers contract specializations.

Ø  Implementing coverage of proper installation, wiring and cable laying, glanding, termination.

Ø  Witnessing of insulation resistance test and hi-pot test.

Ø  The completion of QC site instructions and coordinate their closure the review of inspection test packages during the course of construction activities.

Ø  Perform proactive surveillance inspection to minimize or avoid discrepancy and non-conformance rectification cost and time

Ø  Implementation of quality plan for this project, which include inspection, testing and proper documentation and ensure that all works complied with client/contractor issued (IFC) drawing, applicable standards and specification

Ø  Ensure that all related inspection and testing activities with regards to Environment, Health & Safety procedures and maintenance rules are respected.

QC ELECTRICAL INSPECTOR

AL-OSAIS CONTRACTING COMPANY

Dammam, Kingdom of Saudi Arabia

December 02,2011 to January 25,2014

Duties and Responsibilities:

Witnessing and sentencing of all site inspections within their disciplines

Ø  Coordinate all site inspections with the site engineer

Ø  Ensure that all inspection reports are accurate and that all attached are current status

Ø  Ensure all works is correctly prepared prior to any inspection being undertaken

Ø  Review all inspection reports for compliance

Ø  Assist the QC Manager in the organization ,maintenance and control the quality system

Ø  Assist the QC Manager and construction manager in resolving any discrepancies and ambiguities

Ø  Coordinate with the site contractors to ensure communications exist and are maintained.

Ø  Attend the weekly qc meetings or any scheduled meeting.

Ø  Review work procedures and method statements for compliance with the good work practices and the costumers contract specializations.

Ø  The issuance of nonconformance reports in conjunction with the site QC manager.

Ø  The completion of QC site instructions and coordinate their closure the review of inspection test packages during the course of construction activities.

Ø  Compliance with the sites health and safety regulations.

AL-OSAIS CONTRACTING COMPANY, SAUDI ARAMCO PROJECT

•    MANIFA Project: Job#119

–Contract No.: 6600023163

– BI No.  : 10-00450-0005

•    TANAJIB Project: Job#120

–Contract No.: 6600023164

–BI No. : 10-00450-0007

ELECTRICAL INSPECTOR

ALMAJOSE ELECTRICAL DESIGN AND MANAGEMENT

#27Brgy.Libis, Quezon City

May 22, 2008 to July 14, 2011

Duties and Responsibilities:

Inspection of covered discipline of electrical works

Ø  Insure the all reports are correct together with the documents needed in site inspection

Ø  Coordinate all site inspection with the site contractors

Ø  Review work procedures and method statements for compliance with good work practice and the customers contract specialization.

Ø  Prepare nonconformance reports to the QA manager and assist in developing corrective actions.

Ø  Promote safety in all aspects of the work ensuring that safety management systems are adhering too.

PROJECT SUPERVISOR

R.FERRER ELECTRICAL AND TECHNICAL SERVICES

25 Ramos Compound, Quezon City

June 04, 2004 to March 10, 2008

Duties and Responsibilities:

Ø  Generally responsible for implementations and monitoring of the project

Ø  Estimates, prepares and assigns the resources such as manpower, materials, consumables, equipment, tools, etc.

Required for the project

Ø  Inspect project in progress to insure work is Perform correctly to pre-established standards.

Ø  To direct the duties and responsibilities of site engineers

Ø  Responsible for Weekly accomplishment reports of the project.

ELECTRICAL SUPERVISOR

FERNANDO VITUG CONSTRUCTION

74 Agno Street,Quezon City

September 1995 to Sept. 2003

Duties and Responsibilities:

Ø  Supervise & monitor electrical installation and workmanship prepare materials estimate, prepare revision

Plans and electrical as-built

Ø  Responsible for the materials requisition with coordination and approval of project engineer.

Ø  Inspect work in progress to insure work is Perform correctly to pre-established standards.

Ø  To direct the duties and responsibilities of workers

Ø  Responsible for daily work accomplishment reports of the projects.

Ø  Directly responsible for the safety of all electrical works in the site

Ø  Attend weekly technical and progress report meeting.

Ø  Perform other activities to complete the project.

EDUCATIONAL ATTAINMENT

1990-1994                     Bachelor of Science in Electrical Engineering

University of Luzon

Perez Boulevard Dagupan City

June 2005- March 2006                 Advance Computer

Technical and Skills Course

Bureau of Alternative Learning System

Special Skills:

Microsoft Office Application: MS Word and MS Excel and Autocad

SEMINARS/TRAININGS ATTENDED

SUNBELT H2S SAFETY SERVICES

A Division of Maritime Industrial Services Co. Ltd Inc

Conducted By :MR.EDGAR with Cert.No.:TTTH2S-7-6-65

Coductedon:September 25,2013 inManifa ARAMCO office, Saudi Arabia,

NAVAL FACILITIES COMMAND(NAVFAC)

Conducted By: Philippines Association of Service ExportersInc

Conducted in : Manila Philippines

TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY

Conducted By: TESDA National Capital Region

Conducted in : Manila Philippines

PERSONAL

Personal Information:

Ø  Hardworking, Work dedicated and enthusiastic.

Ø  Can work under pressure

Ø  Possess good and efficient teamwork

Ø  Flexible and can easily adjust to different working environment.

Ø  Can work with less supervision and longer hours

Ø  Responsible, and determined to succeed.

Personal Information:

Age:                             47                                Birth Date:                    14 Dec. 1971

Gender:                        Male                             Civil Status:                  Married

Nationality:                   Filipino                        Religion:                      Iglesia Ni Cristo (INC)

REFERENCES:

SAUDI ARAMCO, Saudi Arabia

Engr. Salah Huda

(PMT)Project Engineer

Contact No.: +966-555318654

AL-JEHATCO

Engr. Yaqoub Hamadah

(PMT) Electrical Engineer

Contact No.: +966-567495900

SAMSUNG ENGINEERING

MR. Do Young Lee

QC Manager

Contact No. +966-501192099

AL-JEHATCO

Engr. Cesar Ragos Jr.

SMP: Senior Electrical Inspector (Engineer II)

Contact No.: +966-58709653

I hereby certify that the above information in this application is true and correct to the best of my knowledge and belief.

_________________

Ricky T. Pata

(QC-Electrical Inspector)