Summary
More than twelve years experienced in the technical field including industrial, manufacturing, after sales and building facilities & maintenance companies. Prior in the field of electrical, electronics, mechanical, hydraulic, pneumatic, automation, PLC, motor control system, etc. Also, included in the experienced in supervising and handling people, scheduling, technical analysis and implementation, energy savings program, EHS program, office works and reporting.

Three years experienced as a Maintenance Supervisor in an ISO & EMS certified manufacturing company. Maintenance planning, analysis and implementation such as; preventive and corrective maintenance. Compliance the standard of the implementing bodies, technical reporting, and other supervisory office works. Handling and training people, implementing standard maintenance procedure and safety awareness of the maintenance personnel. Also including practicing as Safety Officer.

Five years’ experienced as hands-on Electrical Technician or Industrial Mechanic in manufacturing, industrial, and heavy equipment company including technical support services.

In industrial and manufacturing companies, experienced in maintenance, repair, troubleshooting, and installation. Experienced in Electrical wiring and installation, motor control (VFD/VSD), PLC (Mitsubishi, Allen Bradley, Omron), Hydraulic and Pneumatic, Plumbing, some civil works, etc…Experienced in Plastic and rubber molding injection machine, injection and blowing machine, extrusion machine, compression machine, dryer, chillers, screw compressor, Generator set, press machine, lathe machine (conventional), basic welding (arc welding), etc… Also experienced in Testing and commissioning of electrical equipment’s such as; Generator set, ATS (automatic transfer switch), TVSS (transient voltage surge suppressor), ATF (active tracking filter) for plc protector.

In Heavy Equipment’s and Agricultural company performing breakdown analysis, repairing, troubleshooting and maintenance of such; Iveco, Perkins, Caterpillar generators including CLAAS Balers, Excavators, Forklifts, Tractors, and any other agricultural and construction equipment’s and machines.

More than four years experienced in building facilities maintenance and BMS.

In Electrical; From High and Medium voltage (11KV) to Low voltage (220 V) power distribution, from main distribution board up to sub distribution board switchgear operation, including emergency powers like Generators, UPS, Battery Banks and ATS (automatic transfer switch) operations and maintenance. Also Lightings and controls, Fire Alarm system, and other low voltage equipment’s.

In Air Conditioning or HVAC system such as: Chiller, Package/Split/Window type air condition, Air Handling Units, Fan Coil Units, etc. operations, maintenance, repair and troubleshooting.

Also, other facilities and machines like Fire pumps, Pumps, Motors and Controls (MCC), Fans, Waste Water Treatment, Air Compressor, Cooling Tower, Heat Exchanger, etc.

Work Experience:

Position:  Sr. Maintenance Supervisor/ PCSO                      Name of Company: Zhong Fu Unimagna Phil’s., Inc.
Address:  Balibago Sta. Rosa, Laguna, Phil’s.                        Years: March 2017– Present

Job Duties and Responsibilities:

➢                   In Plastic Injection Molding Company, assigned as a Production Maintenance Sr. Supervisor

➢                   Responsible the condition of all machines in production, responsible preventive maintenance plan, analyze root                             cause of production rejection, and provide ideas for productivity improvement. Handle all maintenance personnel

➢                   Study and upgrade machines operation, and report to the Business Unit Manager.

➢                   Also duty as Pollution Control and Safety Officer, make program and implement in the company

—————————————————————————————————————————————————-

Position: Technician, High Voltage                                         Name of Company: AlTaif Technical Services
Address: Zayed Military City, Abu Dhabi, UAE                    Years: October 2015 – Jan 2017

Job Duties and Responsibilities:

➢                   Assigned in Abu Dhabi Zayed Military base Facilities department performing the job as Technician, High Voltage.                         Reporting to the Facilities Engineer.

➢                   Performed repair and rectification of electrical system problem, carry out the corrective and planned preventive                             maintenance of all the building maintained by the company such as; HV (11KV) to LV (220V) power distribution,                         switchgear, generators, control panel, UPS, lightings, small power, MCC, pumps, motor, and other associated in                             electrical system.

—————————————————————————————————————————————————–

Position: Electrical Technician                                                   Name of Company: Serco Limited
Address: Abu Dhabi, UAE                                                            Years: April 2014 – Sept 2015

Job Duties and Responsibilities:

➢                   Assigned in Cleveland Clinic Abu Dhabi as electrical technician in Facilities department. Reporting to the section                           supervisor

➢                   Performed repair and rectification of electrical system problem, carry out the corrective and planned preventive                             maintenance on the electrical services and systems such as; lightings, small power, switchgear, motors, pumps,                             fans, control panels, emergency power, UPS, Battery Bank, BMS, instrumentation, and other associated in                                       electrical system.

—————————————————————————————————————————————————-

Position: Maintenance Supervisor/Safety Officer              Name of Company: JF Rubber Philippines Inc.
Address: Carmona, Cavite, Philippines                                 Years: June 2012 – March 2014

Job Duties and Responsibilities:

➢                   In ISO and EMS certified manufacturing company, supervise all the maintenance job inside manufacturing                                     company in both production and facilities. Implement the Safety policies and programs of the company.                                           Reporting to the Manager and submitted the monthly key performance indicator (KPI).

➢                   Responsible of such as electrical, electronics (automation or PLC), mechanical, hydraulic, and pneumatic repair                             and troubleshooting, planned preventive and corrective maintenance, data and analysis of all machines in the                                 production such as; injection, compression, vacuum machines.

➢                   Responsible of all facilities equipment’s and machines such as; power house, generator set or emergency powers,                           air compressor, cooling towers, water treatment, pumps and motors, air conditioning system, plumbing, general                           trades and fire alarm system.

—————————————————————————————————————————————————-

Position: Electrical Technician                                                   Name of Company: Etisalat Facilities Mngt.

Address: Abu Dhabi, UAE                                                            Years: March 2011 – April 2012

Job Duties and responsibilities:

➢                   In building facilities maintenance, perform repair, rectification and preventive maintenance of all facilities                                     concerning electrical of the building thru MAXIMO software. Reporting to the department supervisor.

➢                   Perform job in electrical distribution board, blower, motor, pump, fire pump, generator, lightings, and any other                           related to electrical job.

—————————————————————————————————————————————————–

Position: Service Electrician Technician                                 Name of Company: Aljomaih Holdings Co.
Address: Jeddah, Kingdom of Saudi Arabia                           Years: Oct 2008 – Sept 2010
Job Duties and Responsibilities:

➢                   In Industrial and Agricultural equipment’s and machine’s supplier and servicing, performed the job in the                                       technical support as Leader Technician. Report to the service supervisor.

➢                   Performed commissioning, set up the parameters program of controllers, set-up voltage and frequency changing                           as per customer requirements, conduct load testing, pre-delivery inspection, troubleshoot, repair, and                                               maintenance of such Iveco and Perkins generator set (from 25 to 2000 KV)

➢                   Also, perform troubleshooting, repair, maintenance, and pre-delivery inspection of such; CLAAS Baler for                                       agricultural, and heavy equipment’s such as; Grader, Excavator, Forklift and Tractors and others.

➢                   Perform customer technical training and orientation of the product or equipment’s.

—————————————————————————————————————————————————–

Position: Service Electrical Technician                                                Name of Company: FMIDC

Address: Makati, Metro Manila, Philippines                                      Years: Jan 2007 – Sept 2008

Job Duties and Responsibilities:

➢                   In Industrial electrical equipment’s supplier and servicing, performed the job in the technical support as Leader                             Electrical Technician. Report to the department Manager

➢                   Perform testing and commissioning, installation, troubleshooting, repair, and maintenance of ATS (Automatic                               Transfer Switch), TVSS (Transient Voltage Surge Suppressor), and ATF (Active Tracking Filter) system which is                             the main customers are all Coca-Cola plant, and some Call center company such as Convergys and Teletech.

—————————————————————————————————————————————————–

Position: Facilities Technician                                                   Name of Company: Terumo Philippines Corp.

Address: Laguna Technopark, Laguna, Philippines              Years: Aug 2006 – Jan 2007
Job Duties and Responsibilities:

➢                   In Japanese medical equipment manufacturing company, performed the job as Shifting Facilities Electrical                                     Technician. Reporting to the department supervisor.

➢                   Perform facilities machines and equipment’s monitoring, operating, troubleshooting, and preventive                                                 maintenance such as; air-cooled chiller, air compressor, air handling unit, cooling tower, generator, motor,                                     pumps and others. Also, including assisting the contractors to implement safety job practices.

—————————————————————————————————————————————————-

Position: Electrical Technician                                                   Name of Company: Sonic Steel Industries Inc.

Address: Trecemartires, Cavite, Philippines                           Years: April 2004 – June 2006
Job Duties and Responsibilities:

➢                   In steel manufacturing company, performed the job as production Shifting Electrical Technician. Reporting to the                         department supervisor.

➢                   Performed monitoring, operating, troubleshooting, repairing, and preventive maintenance of such as; VFD                                     (variable frequency drive), powerhouse and generators, inductors, motors, limit switches and sensors, PLC                                     (Programmable Logic Control), UPS and battery bank, and any electrical machine’s and equipment’s used in                                   production area. Also, responsible for safety matters in working area.

—————————————————————————————————————————————————-

Position: Maintenance Technician                                                      Name of Company: H & E Manufacturing Corp.

Address: Paranaque, Metro Manila, Philippines                              Years: Oct 2003 – March 2004

Job Duties and Responsibilities:

➢                   In plastic manufacturing company, performed the as a production shifting Technician. Report to the department                           supervisor.

➢                   Performed monitoring, troubleshooting and repairing, and preventive maintenance of such as; Extrusion or                                   Blowing machines, Cooling Tower, Chiller, and other machine’s and equipment’s use in production area. Also,                               responsible for product quality and output, and safety matters in working area.

Education   

College: University of Negros Occidental – Recoletos

Course: Bachelor of Science in Electrical Engineering

Bacolod City, Philippines. SY 2002-2003

High School: Our Lady of Sorrows Academy

Hinoba-an, Negros Occidental. SY 1990-1994

Elementary: Bilbao Watkins Elementary School

Hinoba-an, Negros Occidental. SY 1984-1990

Trainings and Seminars

●                    Basic hydraulic, mechanical and electronics training for heavy and agricultural equipment’s:

Nov 15 2008 – Dec 18 2008

●                    Basic AutoCAD

Nov 25, 2016 – Dec 30, 2016

●                    Basic Training Course for Pollution Control Officers (PCO)

June 26-29, 2018

●                    Basic Occupational Safety and Health Course (BOSH)

Sept 11-14, 2018

Personal Data

Birth Date:                          July 31, 1977

Birth Place:                         Cagayan De Oro City

Civil Status:                        Married

Nationality:                        Filipino

Height:                                 5’5”

Weight:                               70 kgs.

Religion:                              Christian

Character References

Name:                  Mr. Zambri Baya                                                   Name:                  Mr. Miguel Dy

Profession:         Sr. Production Supervisor                                   Profession:         Facilities Supervisor

Company:           J.F. Rubber Philippines                                       Company:           Amkor Philippines

Contact No.:       09173176134                                                           Contact No.:       09178303241