Rizardo Villalobos

Rizardo V. Villalobos, jr
Qatar Office

Lödige Systems Middle East

Mob : +974 6651 8023

P.O. Box: 24710, Doha – Qatar

PROFESSIONAL OBJECTIVES: A position that will provide the opportunities to make strong contributions to organizational goals through continued development of professional skills.

PROFESSION:

ELECTRICAL ENGINEER

SPECIALIZATION:

Electrical Wiring Installation, Company facilities handling, machine maintenance, PLC, DCS control and Safety Officer.

MAJOR QUALIFICATION:

Bachelor of Science major in Electrical Engineering, Technological Institute of the Philippines, (1995-2000).

WORKING EXPERIENCES:

Ø MAINTENANCE SUPERVISOR (March, 2010 to Present)

CP-11 Cargo Terminal, New Doha International Airport

Loedige System Middle East

· Supervises for all maintenance team to performing Preventive and Corrective Maintenance Work orders.

· Analyzes and resolves work problems, Troubleshoots, diagnoses, and repairs faulty mechanical, electrical equipment and other related matters.

· Responsible for the maintenance of all Cargo Conveyors, Hoist, ULD, Stacker Crane and other machine in Cargo Handling System.

· Assisted Qatar Airways Operation personnel, for the operation and transport ULD and cages to the correct location Area.

· Responsible for the checking and monitoring faults status for all machines and transferring of ULD and cages.

· Plan and supervises the new project installation for Hydraulic Lift Elevator of new equipment and carries out the commissioning activities related to the project. (Doha Convention Center Qatar).

· Coordinate plans for installation of new equipment and machines

· Estimates costs of personnel, parts, and supplies to be use during scheduled maintenance Spare part preparation and inventory

CAN-PACK MIDDLE EAST (DUBAI)

P.O. Box.215061 D.I.P Jebel Ali

DUBAI, U.E.A

Ø MAINTENANCE ELECTRICAL ENGINEER (January 1, 2007 to February 02, 2010)

· Responsible for the maintenance of all machines, electrical wiring and installation (Electrical and Electronics problems) and other electrical works.

· Responsible for all company facilities and utilities operation and troubleshooting, Chiller, Compressor, Air conditioning, HVAC. And other related matters.

· Troubleshooting of new and installed electrical systems to locate and correct malfunctions; read and interpret blueprints and circuit diagrams.

· Motor hookups, start-stop stations, and control wiring to include 24, 110, 230, 415-volt systems.

· Utilization of a variety of test equipment including digital Multitester, Multifunction tester capacitance checkers, meggers, etc.

· Maintenance and troubleshooting of production machines using PLC Controlled system (Allen-Bradley Logix-5000, SLC-500 and Plc-5) Debug software and systems, including PLC wiring automation control.

· Monitoring of Production machines performance and outputs using SCADA systems (ACTIVPLANT), Ethernet and Device net communication.

CAN-PACK POLAND

Brisk, Poland

Ø MAINTENANCE ELECTRICAL ENGINEER (October 22, 2006 – January 11, 2007)

· Responsible for all electrical works, and maintenance of all machine on the production line.

· Responsible in facilitating/handling and operation, maintenance of Facilities and Utilities of the entire building.

· Familiarization and study of Basic PLC (Allen Bradley).

· Familiarization of electronics and electrical component.

ALLIED BIOTECH CORPORATION (TAIWAN)

No.6 Gungye 6th Rd, Guanyin Industrial Park,

Guanyin Shiang, Taoyuan, Taiwan 328, R.O.C

Ø PRODUCTION TECHNICIAN/ELECTRICAL (DCS) (July 01, 2003 up to June 30, 2006)

· Responsible for the maintenance of all machines and its operation, Support and maintenance of process control systems, troubleshooting control system problem, control system performance monitoring, DCS control. (Honey well)

· Responsible for controlling all production machine and other building facilities, colling tower, compressor, chiller from Distribution Control System (DCS).

R.C.W. CONSTRUCTION and DEVELOPMENT CORPORATION

RM. 508 Jovan Condon, Shaw boulevard corner

Samat Street, Mandaluyong City Philippines

Ø ASSISTANT PROJECT ELECTRICAL ENGINEER (December 5, 2002 – June 25, 2003)

· Responsible for all electrical works and other electrical project materials.

· Checking electrical works according to the documentation and electrical wiring standard.

FULL WIN PLASTIC CORPORATION

No. 15 Tzu Chiang Rd., Feng Shan Tsun, Hsin Chu Hsien

Hsin Chu City, Taiwan, R.O.C.

Ø MAINTENANCE ELECTRICAL ENGINEER( February 2002 – November 2002)

· Responsible for the maintenance of all company machines and its operation and other related matters.

· Repairing electrical and mechanical works at production line.

MITSUBA PHILIPPINES CORP.

Lot 1, Blk. 14, Phase II

First Cavite Industrial Estate (FCIE)

Brgy. Langkaan, Dasmariñas Cavite, Philippines

Ø MAINTENANCE ENGINEER (July 3, 2000 – January 31, 2002)

· Responsible for the troubleshooting and repairing of defective production machines and equipment (such as electro-pneumatics, electro-mechanical equipment) encountered in production lines at the shortest possible time.

· Responsible for keeping and submitting all record of the Production Downtime Report on all machine defect criteria, causes, preventive and corrective action for evaluation and study purposes.

· Responsible in facilitating/handling and maintenance of Facilities and Utilities of the entire building.

· Responsible for fabricating mold, jig and gauge use for production.

· Responsible in giving suggestion and recommendation to avoid future machine problems.

· Responsible for controlling all incoming engineering (i.e. maintenance section) supplies and materials.

· Responsible for the inventory through checking quantity of materials and tools.

· Responsible for the design and prepare jigs use in the Production machines.

· Knowledge in programming PLC such as Omron, Mitsubishi and Keyence.

· Knowledge in the operation and maintenance of machines such as milling, lathe, formation grinder, surface grinder, tool grinder, drilling, vertical and horizontal sewing machines and welding machine.

· Knowledge in troubleshooting PLC and sensors such as Keyence, Omron, Sun-x and Mitsubishi.

COMPANY TRAININGS and SEMINARS:

June., 19-June.21, 2016 SAFETY OFFICER TRAINING WITH FIRST AID & FIRE

FIGHTING.

By: Harish (Training Manager)

By: Leo Dote (Course Instructor)

Enertech Aviation and Maritime Academy (Qatar)

April, 15, 2014 NEBOSH Award in Health and Safety at Works

Master log certificate NO…0022562570一84

SQARef…R20404

Enertech Aviation and Maritime Academy (Qatar)

Sir Bill Callaghan(Chairman)

Teresa Budworth (Chief Executive)

July, 11, 2011 NDIA SUPERVISOR’S TRAINING COURSE

By: Bill Smith (OBI Construction Manager)

By: John Paton (OBI ES&H Manager)

NDIA/OBI Training Facility /QATAR

April, 08, 15, 22, 2011 OSHA 30 HOUR COURSE-CONSTRUCTIONS

By: Engr. Pradesh Prabhakaran (Region VIII Outreach Instructor)

Lödige Middle East Qatar (office)

Feb., 20-Feb.22, 2011 SAFETY OFFICER TRAINING WITH FIRST AID & FIRE

FIGHTING.

By: Ferdinand Acosta (Training Manager)

By: Leo Dote (Course Instructor)

Enertech Aviation and Maritime Academy (Qatar)

Dec.13, 2008 CERTIFICATE OF EXCELLENCE EMPLOYEE

(As Maintenance Engineer)

Awarded by: Mariusz Stolarczyk (Can pack

Operation Director)

Can pack Middle East LLC. DUBAI

June, 06, 2008 STOLLE RETROFIT SHELL PRESS ELECTRICAL TR

By: Dan Valentine (Electrical Technician)

Stolle / Can Pack /DUBAI

Nov.11-Nov.14, 200 PROGRAMMING LOGIC CONTROLLER (PLC)

Allen Bradley (RS-Logix-5000, 500) BY: Hubert Smolarciek

Can pack Poland

Sept.18- Sept.21 ELECTRICAL LAY-OUT, INSTALLATION &PLAN

BY: Kenzo Canda (Engineering Manager)