CURRICULUM VITAE
Of

ROBERT ANTHONY L. EDJEC

Job Position:  QAQC ENGINEER / INSPECTOR – Electrical and Instrumentation

Career Objective

Seeks a position in a highly Challenging Industry where my knowledge & Wide experience would be a valuable assert.

Area of Expertise

Carried out joint inspection activities along with the client representatives on site work based on RFI with the help of supporting documents

Conceptualized & implemented modifications in operating procedures to optimize resource utilization & ensure smooth operations.

Responsible for performing quality check & issuance of conformance / nonconformance report to the contractors

Active support to quality management team for overall quality controls & also implemented QCP & standards

​

PERSONAL DATA:

Name:               ​            ROBERT ANTHONY L. EDJEC

Home Address: ​San Rafael,Tanjay City, Philippines

Mobile Nos.:  ​+63 9156963039 (Roaming)

Home Contact Nos.: ​+63 9173011327 (Philippines)

Email address:​[email protected]

Nationality:                             Filipino

Religion:​Roman Catholic

Date of Birth:                         ​June 13, 1975

Place of Birth:                        Dumaguete, Negros Oriental, Philippines

Sex:                                        Male

Civil Status:                            Separated

Father Name:​           Rudolph Rotea Edjec

Mother Name:​           Erlinda Labe Edjec

No. of children:​2

Passport No.:​           EC7682173, Issued on May 11,2016 expire May 10,2021

EDUCATIONAL ATTAINMENT:

College / Course:                                                          Month / Year Graduated:

B.S. Electrical Engineering                                                    ​       March 1998

Silliman University, Dumaguete City, Negros Oriental, Philippines

Secondary School:

Saint Paul University, Dumaguete City, Philippines                              March 1992

Primary School:

Plaza Central School, Negros Oriental, Philippines                               March 1988

COURSES EARNED:

TBOSIET-Issued by GTSC Abu Dhabi,Mussaffah Industrial ,UAE

Dated 29th  January 2014, SPPNo. 00076531

BASIC H2S (OPITO APPROVED)- Issued by GTSC Abu Dhabi,Mussaffah Industrial ,UAE

Dated 23th  January 2014, SPPNo. 00076564

MEMBERSHIPS:

Silliman University Alumni Association, Dumaguete City, Negros Oriental, Philippines

JOB DESCRIPTION:

Robert Anthony L. Edjec

QAQC Engineer / Inspector(Electrical and Instrumentation)

Oil and Gas / Petrochemical / Industrial Construction

​

EMPLOYMENT RECORD

Company:​Kentech International Electrical Equipment & Contracting Co. W.L.L.

Position:​E/I QC Inspector (KNPC APPROVED)

Inclusive Date:​5th Febuary 2017 up to 31st August 2018

Project:​Clean Fuel Project (MAB-2)

Client:​FDH JV (Flour Daewoo Hyundai)

Location:​Kuwait

Duties and Responsibilities:

•  Implementation of standard practice as per project ITP (Shell DEP Standard)
•  Responsible for E/I site surveillance to ensure that the work is conducted as per client specifications (shell standard) to support and guide the team in the correct execution of works
•  Implementation of quality plan, quality procedure and inspection test procedure based on client specification standard
•  Knowledge of E/I installation of area classification it regards hazardous & non- hazardous as per standard
•  To performed inspection all inspection with based  (ITP) inspection test procedure as per project requirement related (E&I) electrical and instrumentation activities
•  Carried out joint inspection with PMC team in site works activities
1. Material inspection
2. LV Panel, Distribution board,  small power and JB installation
3. Cable inspection include high potential test for HV (HIPOT)
4. Instrument installation inspection
5. Functional test for distribution board, LV panel, RCU and emergency stop push button
6. Motors and transformer installation and testing
7. Heat tracing installation inspection
8. Cathodic protection / corrosive protection inspection
9. Earthing and lightning protection inspection
•  Responsible for SAT inspection with supporting document by vendors
•  MV & LV Motor solo run test using vendors specification
•  Preparation and signing off for completed check sheet with PMC and third party inspector
•  Red mark up as per site condition
•  Site observation memo, punch list and work to go list clearing
•  Coordinate to construction regarding problems during arise the project prior final inspection with the client
•  Record all construction works regarding progress and problems to submitted to QC manager
Company:​ Kentech Global Services

Position:​ E/I QC Engineer

Inclusive Date:​ 1st April 2015 to 31st March 2016

Project:​ Banyu Urip Project (EPC Project)

Client:​ Exxon Mobil

Location:​ East Java, Indonesia

Duties and Responsibilities:

• Implementation of standard practice as per project specification and ITP
• Responsible for planning and implementing work for QC team to check and review all works to comply as build drawing during arise the project
• Working knowledge of electrical and instrumentation installation of non hazardous & hazardous location, materials and specification
• Familiar and competent with QCP, ITR & RFI documentation
• Working knowledge of NEC, IEEE, NETA and EASA standard
• Signing off of completed ITR check sheet in field with client and third party inspector
• Carried out joint inspection activities along with the client representative on site works on RFI with help of supporting documents
• Responsible for performing quality check and issuance of conformance / nonconformancereport to the contractors
• Active support to quality management team for overall  quality control and also implemented QCP & ITP standard
• Conduct joint inspection in electrical work as follows:
1. Primary and secondary cable tray
2. Earthing and bonding system works
3. MV/LV cables joint inspection
4. High potential test of MV cables
5. 6KV induction motor testing continuity, IR, PI
6. LV cables testing inspection
7. LCS inspection
8. Transformer installation and SAT inspection
9. Heat tracing inspection before and after thermal insulation
• Conduct and joint inspection for instrument works
1. Installation and segregation of cable between power and instrument also the bending radius of cables
2. IR and continuity test of instrument cable IS/non IS
3. Instrument installation inspection
4. Speaker and paging system
• Red markup changes as per site condition and also revised the engineering database
• Clearing punch list prior to handover the client
• Coordinate and record all works regarding progress and problems during arise the project and submitted to Project QA/QC Manager
​

Company:​NPCC (National Petroleum Construction Company)

Position:​E&I QC Inspector (Offshore)

Inclusive Date:​20TH October, 2013 up to 16thFebruary, 2016

Project:​UZ-750 ZADCO Expansion Project

Main Contractor:​NPCC-TECHNIP JV EPC-1

Client:​ZADCO

Location:​Upper Zakum Field, Abu Dhabi, UAE

Duties and Responsibilities:

• Implementation of standard in electrical and instrument works as per company agreement (ITP) inspection test plan
• Responsible for planning & implementing work-fronts for QA / QC team.
• Inspection of permanent material prior to installation on site , to ensure that material is compliant to site standards & specifications
• Working knowledge of electrical / instrumentation installations / materials / methods / specifications / identification of hazardous area installations.
• Work monitoring as per approved drawing, specification and scope of contract.
• Carrying out of site inspections on a daily basis to ensure that work-fronts / work-scopes are adhered to site specifications.
• Responsible to check and review all works to comply the as built drawings during the project.
• Inspection & testing of earthing / lightning protection systems.
• Generation / Clearing of punch lists prior to systems handover.
• Direct interface between client & subcontractor QA / QC teams.
• Familiar & competent with ACS / NFI / RFI / ITR documentation.
• Working knowledge of National Electrical Code / IECequivalent standards
• Red-lining of electrical drawings to suit site conditions
• Inspection & testing of UPS / Telecoms / Fire & Gas systems.
• Inspection & testing of 6.6KV / 415V / 230V motors.
• Familiar & competent with test equipment used for routine inspections.
• Conduct inspection as follow together with client
I.0 Cable tray installation for lighting and instrument systems
2.0 Cable laying in trenches and ladder racks / cable trays
3.0 Installation in lighting fixtures, instruments and tubing
4.0 Air craft warning light control panel installation
• Perform testing inspection for continuity and insulation resistance test as follows
1.0 Instrument cables
2.0 Lighting circuits
3.0 Small power distribution system
• Coordinate and record all works regarding progress and problem during inspection and report directly to QC Manager
• Involved on SAT walk downs & system completion walk-downs
• Signing off of completed ITR’s / Check sheets in field with client & third party inspectors.
• Inspection of over ground & underground trenches.
COMPANY:​GS E&C

Position:​ELECTRICAL QC INSPECTOR

Inclusive Date:​29TH June 2012 up to 31st August 2013

Project:​Ruwais Refinery Expansion Project (EPC-2)

Location:​Ruwais Insdustrial, Abu Dhabi, UAE

Duties and Responsibilities:

• Implementation of standard in electrical works as per company agreement (ITP) inspection test plan and (QCP) quality control procedure
• Conduct inspection for installation as follow with client:
1. Conduit for lighting system and power system
2. Cable perforated and ladder tray
3. Panel board, medium voltage switchgear, UPS, transformer, motor control center, ECB, (VFD) variable frequency drive
4. Lighting fixtures, single three phase socket, thermostat, switch and push button
5. Grounding system and lightning protection
• Perform testing inspection such as:
1. Continuity and insulation resistance test of cables
2. High potential test of cable
3. Winding resistance and insulation resistance test of motors
4. Dielectric strength test in oil transformer, (TTR) transformer turn Coordinate ratio, winding and insulation resistance test
5. High potential, contact resistance, insulation resistance and functional test of medium switchgear
6. Discharging battery test for UPS and charger in MVSG
7. Earth resistance and continuity test for grounding
• Conduct and perform functional test for the following
1.    Medium Voltage Switch Gear
2.    Automatic transfer switch
3.   Emergency Main Distribution Board Coupler
4.   Transformer for the temperature, fans for radiator, and controller
5.   Uninterrupted power supply (UPS) system
6.   Variable frequency drive (VFD)
7.   Emergency Motor Control Center
• Coordinate and record all electrical works regarding problem encountered during inspection and report directly to QC Engineer
COMPANY:​GS E&C

Position :​Electrical QC INSPECTOR

Inclusive Date:​29TH January 2009 to 06thDecember 2011

Project:​Green Diesel Project

Location:​Ruwais Insdustrial, Abu Dhabi, UAE

Duties and Responsibilities:

• Implementation standard of inspection test plan (ITP) and quality control procedure (QCP) as per company agreement
• Conduct inspection for installation such as:
1. Lighting, power, grounding & communication system layout
2. Panel board, local control station, transformers, electric motors and motor operated valve
3. Cable tray for lighting, power and communication system
4. Installation of heat tracing and lighting level gauge.
• Perform inspection for testing as follows:
1. Continuity test and insulation resistance test for lighting, power,
Communication cable and panel board

2. Continuity test, insulation resistance test and polarization index test for electric motors prior to energize.
3. Continuity test, insulation resistance test and oil dielectric strength test for transformer.
4. High potential test for medium voltage cable.
5. Illumination test for normal and emergency lighting as per project standard
• Conduct and perform inspection for functional test of local control station (LCS)
and motor operated valve (MOV) + electric motor solo run test

• Perform final inspection to energize communication system with vendors as
per vendors checklist.

• Coordinate and record all electrical worksregarding problem during inspection with
client and report directly to QC Engineer.

COMPANY:​Vasco Enterprises Inc.

Position:​Electrical Inspector Maintenance FV– Carolina, 1986 Purse Seiner

Inclusive date:​13th Sept 2007 up to 20th Nov 2008​

Location:​American Samoa, USA, 66799

Duties and Responsibilities:

• Prepare check sheets for electrical devices and motors such as air compressor,
• Circulating pumps and hydraulic pumps before departure.
• Perform inspection and maintenance on various electrical devices on the vessel.
• Check the status condition on the CATERPILAR 3412 DITA/520KW/60HZ/480V diesel power generatorsunits.
• Coordinate with the Chief Engineer specially when requesting and installing various electrical equipment.
• Perform scheduled preventive maintenance for all electrical machineries like the primary generation system, emergency generators, motors and back-up system on the vessel.
COMPANY:​STARKIST AMERICAN SAMOA

Position:​Maintenance Engineer (Preventive)

Inclusive date:​10th Sept 2003 up to 25th Oct 2005

Location:​American Samoa, USA, 66799

Duties and Responsibilities:

Perform actual trouble shooting of motor control such as :

A. Programmable Logic Controller
B. Direct Line Control
C. Wye Delta Control
D. Part Winding test
Perform preventative and corrective maintenance

A. Main Circuit Breaker
B. Capacitor Bank
C. Generator
D. Conveyor
Repair and overhaul AC electric motor.

COMPANY:​OMNI Philippines Inc.

Position:​Quality Control Officer

Inclusive date:​17th June 2001 up to 2nd April 2003

Location:​Cebu Philippines

Duties and Responsibilities:

• Ensures the implementation of the quality plans and objectives of the department and
project assignment.

• Technical guidance for inspection, testing and quality services activities.
• Ensures that all required test and/or inspections are performed quality plan and
surveillance.

• Inspection plan and procedure coordination on projects.
• Ensure compliance of applicable codes, working standards and procedures.
COMPANY:​Silliman University

Position:​Electrical Apprentice

Inclusive date:​29th June 1999 up to 30th March 2000

Location:​Dumaguete City Philippines, 6200

Duties and Responsibilities:

• Witness or review on site commissioning activities to confirm compliance with
contract documents and specifications.

• Log and track all quality deficiencies
• Assist in revolving identified quality deficiencies
• Keep daily records of executed commissioning activities
• Perform other duties as required
• Testing and commissioning activities within area of responsibility
References:

• Ronald B. Edjec
• E/I QC Manager
• Construction Consolidated Company
• Mail: [email protected]
• Stacy Williams
• E/I Construction Manager
• Kentech International Ltd.
• Mail: [email protected]
•          [email protected]
• David Anthony Walsh
• E/I Project Manager
• Bunyu Urip Project (EPC-1)
• Exxon Mobile Indonesia
• Kentech Global Services
• Mail: [email protected]
• [email protected]
 

Acknowledgement:

I Robert Anthony L. Edjec assure you that the above provided information are true to the best of my knowledge.

SIGNATURE

Robert Anthony L. Edjec