MONGE, RODOLFO JR. H

Mechanical Engineer

Contact Information
Address
:
Blk1 Lt1 Manchester 6 Lancaster City Brgy.Navarro Gen.Trias Cavite
Mobile No.

Home
:

:
+639265937825

+6346-458-0906
Email
:
[email protected]

Skype Account                        :   Rodolfo Monge

Career Objective:
A globally motivated Mechanical Engineer with a prime duty and responsibility to carry out mechanical works for rotating and static equipment in construction industry, oil and gas/petrochemical plant operation and maintenance. Ensure the full compliance with the company’s project specification, quality assurance and project safety standard.

Employment History
Company: Al-Hoty Company Ltd ( SMP Sadara Chemical)

Address: Jubail 2 Ind.City

Projects: Sadara Chemical Company , Jubail 2 Industrial City

Position: Maintenance Engineer

Date: September 6, 2015 – January 31, 2018

Client: Sadara Chemicals

Duties and Responsibilities:

Ø  Develop the mechanical procedure for rotating and static equipment for plant maintenance to meet the PPM requirements, such as Pumps, Compressors, Turbines, Fans & Blowers, Exchangers, Pressure Vessel, Storage Tanks, Coolers and Valves.

Ø  Develop and improve predictive and preventive maintenance programs for mechanical equipment.

Ø  Analyze problems and take appropriate corrective action to ensure continuous and reliable operation of equipment and system.

Ø  Performed routine maintenance inspections of equipment to identify and respond to problems in a timely manner, thus preventing breakdowns.

Ø  Lead, analyze and troubleshoot chronic and recurring equipment problems

Ø  Ensure to provide safety provision of every worker in developing procedure

Ø  Propose changes to the equipment maintenance plan and need for replacement

Ø  Applies value analysis to repair/replace, repair/redesign, and make decisions.

Ø  Perform work within applicable standards, guidelines, and procedures

Ø  Utilize quality systems to ensure compliance with regulatory requirements

Ø  Function as a technical resource on equipment and systems, such as developing PM procedures and troubleshooting.

Ø  MRO cataloging and validation of spare parts.

Company: Al –Hoty Company Ltd/ (SMP Saudi Aramco)

Address: Ras Tanura  Saudi Aramco

Projects: Abu Ali Producing Dept. Saudi Aramco

Position: Maintenance Engineer III

Date: August 13,2014 –August 15, 2015

Client: Aramco

Duties And Responsibilities:

Ø  Repair and overhaul of various types of rotating equipment such as, steam turbine, air compressors, gearboxes, pumps single and multi- stage and valves.

Ø  Provide consultation in all aspects of normal and emergency plant maintenance procedure and standards.

Ø  Provide technical support to maintenance and machine shop daily operation.

Ø  Support installation maintenance and repair of rotating equipment.

Ø  Troubleshoot, repair, and modify existing equipment, identify cost reductions, process improvements.

Ø  Provide coaching and knowledge sharing to junior Engineers.

Ø  Assist in corrective and preventative action resolutions.

Ø  Participate in internal or customer drawing reviews.

Ø  Participate in field/shop inspection or troubleshooting activities

Ø  Participate in standards value engineering,

Ø  Ability to design engineering package.

Ø  Review and update daily and weekly maintenance metal activities.

Ø  Responsible to process direct charge material through SAP System.

Ø  Participate in material preparation for implementation of schedule maintenance activities and plan maintenance shutdown.

Ø  Attend any emergency call for major equipment failure and provide recommendation for immediate repair.

Company  :  SAMSUNG ENGINEERING  CO, LTD

Address    :  KHURSANIYAH  JUBAIL  (KSA)

Project      :  WASIT  CO-GEN and STEAM GENERATION POWER PLANT PROJECT

Position    :  Mechanical Supervisor (Rotating/Static Equipment)

Date          :  May 12, 2012 to May 16, 2014

Client        :   SAUDI ARAMCO

Duties and Responsibilities:

Ø  In-charge of rotating equipment package such as, Gas Turbine Generator (GTG), STG and HRSG, and Balance of Plant Equipment (BOP), Prepared and review the following document for Equipment and Foundation Drawing, Vendor Installation and Inspection Procedure prior to installation of equipment.

Ø  Responsible to assist foreman to interpret and analyzed the technical drawing such as General assembly and sectional drawing of equipment.

Ø  Conduct routine surveillance, inspection and monitoring of Erection, installation and all equipment activities to ensure the project standard specification are properly followed and implemented.

Ø  Scheduling the erection of equipment, provide and review drawing of equipment and check the revision and orientation before installation. Identify the equipment location as per general arrangement drawing and prepare layout and measurement.

Ø  Supervised the preliminary and final alignment activities of rotating equipment.

Ø  Established work program, the optimum utilization of the work force and equipment endeavoring to avoid loss and wastage of time and material.

Ø  Monitoring the site activities for rotating and static equipment and submit daily report

Ø  Check the condition of equipment measurement and alignment (axial and radial) for rotating and static equipment, and check shimming requirements.

Ø  Coordinates with QC inspector and take proper action in any related problem encountered or comments being raised during the inspection. Take appropriate action of any NCR issues.

Ø  Check of any modification related issue raised by the vendor as per drawing and take immediate action.

Ø  Check and ensure safety standard measure being implemented prior to work activity execution at site.

Ø  Check the condition of Anchor bolts and leveling of foundation prior to erection of

Equipment’s.

Company  : HYUNDAI ENGINEERING & CONSTRUCTION COMPANY

Address :    KHURSANIYAH JUBAIL (K.S.A)

Project :      KARAN GAS FACILITIES PROJECT(Train 1-3)

Position :    Mechanical Engineer (Rotating /Static Equipment)

Date :          March 10,2010 to March 20, 2012

Client :        SAUDI ARAMCO

Duties and Responsibilities:

Ø  Provides technical contribution to mechanical engineering team with work scope ranging through equipment basic and detailed engineering designs, specification, mechanical general arrangement, calculation & sketches, risk assessment, planning and project management.

Ø  Leads in the erection, installation and alignment of the following mechanical equipment such as, Exchangers, Pump package, turbine and motor drive compressor, storage tanks and structural assemblies.

Ø  Responsible to assist the supervisors and foreman to interpret and analyzed the technical drawing such as general and sectional drawing, P&ID package.

Ø  Scheduling the erection of equipment, review the drawing and check the revision and orientation prior to installation. Identify equipment location as per general arrangement drawing, prepare lay outing and measurement.

Ø  Prepared the parameters for unresolved problem on site for rotating and static equipment and assist the work of the vendor.

Ø  Established work program, the optimum utilization of the work force and equipment endeavoring to avoid time loss and material wastage.

Ø  Prepare and review the document of rotating and static, Inspection report before the material receiving inspection.

Ø  Supervised the final alignment activities of rotating equipment and prepared document for motor solo-run test, piping re-statement report and raised RFI for final alignment inspection.

Ø  Over all in charge the preservation of rotating equipment, conduct inspection as per vendor recommendation.

Ø  Accountable and responsible for the safety compliance of all workers and monitor at all time the proper used of the prescribed PPE’s while on site work.

Company Name: Coca –Cola Bottlers Phil Inc.

Position Title: Maintenance Supervisor (May 2004 –September 2009)

Duties and Responsibilities

Ø  Perform maintenance and repairs, such as complete overhauls, replacement defective valves, gaskets, bearings, rotating drives, hydraulic and pneumatic systems, conveyor systems, plc’s controls and fabrication of new parts

Ø  Maintain daily logs of operation, maintenance and safety activities, including test results instrument readings, and details of equipment malfunction and maintenance work

Ø  Analyze problems and take appropriate corrective action to ensure continuous and reliable operation of equipment and system

Ø  Ensure that all tools and equipment are properly accounted for and stored.

Ø  Keeps up to date inventory of spare parts on hand, with complete cost, description and specification of items listed.

Ø  Assist in requisition of parts and supply.

Ø  Conduct Preventive maintenance of  plant mechanical equipment, provide work schedule for major and minor repairs including water treatment, waste water and CO2 plant facilities

Ø  Reviews the accomplishments report  of repairs and maintenance jobs or any information regarding machine failure

Ø  Manage and control of capital expenditure budget, cost of all repair and maintenance activities as per maintenance plan program in daily, weekly, monthly, quarterly & semi-annually.

Ø  Repairing and maintaining mechanical equipment

Ø  Troubleshoot, repair and maintenance works of auxiliary equipment of LOOS boiler such as, Repair and installation of damage back refractory, Replacement of defective low water cut off pressure switch, Repair and installation of defective/damage smoke stack (chimney), Replacement and installation of Danfoss feed water pump assembly, Replacement and installation of defective steam traps and coil heaters and Repair of leaking condensate tanks and return lines.

Ø  Computer literate MS word, excel,  PowerPoint, SAP (ERP)application and Autocad2D

Ø  Designs and implements a training and motivation program for mechanics, electrician, and other skilled labor in maintenance section.

Ø  Provide leadership and job coordination on critical repairs or project and implement the (CMMS)
 

Company
:
Coca-Cola Bottlers Phil. Inc.

Position
:
Production Supervisor (February 1998-April 2004)

Duties and Responsibilities

Closely monitors and oversees all production equipment during operation maintenance and servicing activities.
Recommends for capital projects to improve production performance, efficiency, working condition and etc.
Leads continuous improvement initiative to met production parameters
Manage the conversion of raw materials into finished goods
Prepares manpower schedule and direct labor utilization report
Reviews and recommend for approval of regular and overtime hours of production personnel
Ensure implementation of quality control test parameters
Formulate corrective action plan concerning problems affecting productivity
Ensure that quality and safety standards are met adhered to all employees
Enhances manpower skills through formal trainings, seminar/workshops/coaching
Review and analyze productivity, yield, downtime reports daily
Ensure the attainment of all production KPI’s target
Reduction of BOQ rejects at acceptable level
Ensure compliance to Occupational Health and Safety (OHS), security and environmental requirements.
Ensure compliance to GMP, food safety, and TCCMS requirements.
Ensure the prescribed start-up efficiency
Minimize/Eliminate product rejects
Conduct IDM process when the need arises and impose the rendered disciplinary action
 

Educational Background

Bachelor of Science in Mechanical Engineering (BSME)
Eastern Visayas State University
Tacloban City 1991-1996

Secondary:
Leyte National High School

Tacloban City, Leyte 1987 – 1991

Primary:
Marasbaras Elementary School
Tacloban City, Leyte 1980 –  1986

Additional Information
Trainings and Seminar

·         CADETSHIP TRAINING PROGRAM BATCT 29, STA.ROSA TRAINING CENTER

·         OPERATION OF AUXILLIARY EQPT.

·         TEAM LEADERSHIP TRAINING

·         FUNCTION OF SAFETY DEVICES,

·         HAZARD ANALYSIS AND CRITICAL CONTROL POINTS (HACCP/OHS),

·         WORK AT HEIGHTS AND CONFINED SPACE WORKS TRAINING.

·         BASIC OPERATION OF PNEUMATIC EQUIPMENT,

·         SEMINAR ON PRESSURELESS COMBINER,

·         BASIC EQUIPMENT CARE,

·         BASIC SUPERVISORY TRAINING

·         WASTE MANAGEMENT CONTROL PROGRAM,

·         MAINTENANCE MANAGEMENT SYSTEM TRAINING, STA. ROSA TRAINING CENTER

·         BOILER OPERATION AND MAINTENANCE,STA.ROSA TRAINING CENTER

·         OCCUPATIONAL SAFETY AND HEALTH STANDARDS AND PRESSURE VESSELS HANDLING,(DEPT. OF LABOR)

·         PROBLEM SOLVING PROCESS TRAINING,CALASIAO PLANT

·         SIDEL SBO10 MACHINE TRAINING, TAKWEEN ADVANCED INDUSTRIES

·         SIDEL SBO8 MACHINE OPERATION AND MAINTENANCE,TAKWEEN ADVANCED INDUSTRIES

·         SAFETY TRAINING FOR WORK AT HEIGHT AND CONFINED SPACE, SAMSUNG TRAINING CAMP WASIT SAUDI ARABIA

·         SCABA COURSE, JUAYMAH FIRE TRAINING CENTER SAUDI ARAMCO K.S.A

·         INDUSTRIAL FIRE SAFETY AWARENESS COURSE, JUAYMAH FIRE TRAINING CENTER SAUDI ARAMCO K.S.A.

·         SIP TRAINING ( SADARA SITE INDUCTION PROGRAM) METOC 9A SADARA CAMP SITE

·         LCS (LIFE CRITICAL STANDARDS) METOC 9A SADARA CAMP SITE

·         PORTABLE FIRE EXTINGUISHERS TRAINING, THE FIRE SCIENCE ACADEMY KSA

·         COMPLETION OF MECHANICAL PROCEDURE TO MEET THE REQUIREMENTS OF THE PPM AND CORRECTIVE ACTIONS IDENTIFIED IN THE EQUIPMENT RELIABILITY STRATEGIES – SADARA CHEM. COMPANY JUBAIL,KSA

Organizations

Saudi Council of Engineers
Philippine Society of Mechanical Engineers Tacloban Chapter

Personal Information
Born on August 20, 1973 Tacloban City, Leyte
Stands 5’,6 at 140 lbs.
Father: Rodolfo S. Monge Sr.  (Deceased)

Mother: Dolores H. Monge, House wife

References

Name
:
Nabeel Sakiri
Telephone No.
:
+966555556946
Position
:
Metal Welding Maintenance Supervisor
Company
:
Saudi Arabian Oil Company(Saudi Aramco)Jubail,Abu Ali plant RTPD Maintenance Services Division
Email Add:
:
[email protected]

Name
:
Osmundo B.Gomez
Telephone No.
:
+966507512564
Position
:
Technical  Advisor Mechanical Services
Company
:
Ras Tanura Producing Department Juaymah Plant Saudi Aramco
Email Add:
:
[email protected]